• Journal of Information Display
• /
• 제12권1호
• /
• pp.61-67
• /
• 2011

A single-clock-driven shift register and a two-stage buffer are proposed, using p-type, low-temperature polycrystalline silicon thin-film transistors. To eliminate the clock skew problems and to reduce the burden of the interface, only one clock signal was adopted to the shift register circuit, without additional reference voltages. A two-stage, p-type buffer was proposed to drive the gate line load and shows a full-swing output without threshold voltage loss. The shift register and buffer were designed for the 3.31" WVGA ($800{\times}480$) LCD panel, and the fabricated circuits were verified via simulations and measurements.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권3호
• /
• pp.225-230
• /
• 1994

In this paper, we have fabricated short channel MOSFETs with these parameters to verify the validity of process parameters extraction by DTC method. The experimental results of fabricated short channel devices according to the optimal process parameters demonstrate good device characteristics such as good drain current-voltage characteristics, low body effects and threshold voltage of$\leq$+-.1.0V, high punch through and breakdown voltage of$\leq$12V, low subthreshold swing(S.S) values of$\leq$105mV/decade.

• 센서학회지
• /
• 제33권1호
• /
• pp.12-17
• /
• 2024

Floating inverter amplifiers (FIAs) have recently garnered considerable attention owing to their high energy efficiency and inherent resilience to input common-mode voltages and process-voltage-temperature variations. Since the voltage gain of a simple FIA is low, it is typically cascaded or cascoded to achieve a higher voltage gain. However, cascading poses stability concerns in closed-loop applications, while cascoding limits the output swing. This study introduces a gain-enhanced FIA that features cross-coupled body biasing. Through simulations, it is demonstrated that the proposed FIA designed using a 28-nm complementary metal-oxide-semiconductor technology with a 1-V power supply can achieve a high voltage gain (> 90 dB) suitable for dynamic open-loop applications. The proposed FIA can also be used as a closed-loop amplifier by adjusting the amount of positive feedback due to the cross-coupled body biasing. The capability of achieving a high gain with minimum-length devices makes the proposed FIA a promising candidate for low-power, high-speed sensor interface systems.

• 대한전자공학회논문지SD
• /
• 제44권6호
• /
• pp.89-93
• /
• 2007

본 논문은 3.3V, $0.35{\mu}m$ CMOS 기술을 이용하여 I/O 인터페이스를 설계, 검증하였다. LVDS (low-voltage differential signaling)는 차동전송 방식과 저 전압의 스윙으로 저 전력 고속의 데이터를 전송할 수 있다. 본 논문은 기존의 차동증폭기나 감지 증폭기를 사용한 LVDS와 달리 telescopic 증폭기를 이용하여 2.3 Gbps의 빠른 전송속도를 갖는 LVDS 고속 인터페이스를 구현하였다. LVDS의 표준을 모두 충족하였고 25.5mW의 전력소모를 갖는다. 이 회로는 삼성 $0.35{\mu}m$ CMOS 공정을 이용하여 설계하였으며, HSPICE를 통하여 검증하였다.

• 한국전기전자재료학회논문지
• /
• 제20권1호
• /
• pp.1-7
• /
• 2007

In this paper, two kinds of initial oxidation methods i.e., SLTO(Slow Low Temperature Oxidation: $700^{\circ}C$) and RTO(Rapid Thermal Oxidation: $850^{\circ}C$) are applied prior to the plasma nitridation for ultra thin oxide of RPNO (Remote Plasma Nitrided Oxide). It is observed that SLTO has superior characteristics to RTO such as lower SS(Sub-threshold Slope) and improved Ion-Ioff characteristics. Low frequency noise characteristics of SLTO also showed better than RTO both in linear and saturation regime. It is shown that flicker noise is dominated by carrier number fluctuation in the channel region. Therefore, SLTO is promising for nano-scale CMOS technology with ultra thin gate oxide.

• 한국전기전자재료학회논문지
• /
• 제37권1호
• /
• pp.43-47
• /
• 2024

The size of semiconductor devices has been scaled down to improve packing density and output performance. However, there is uncontrollable spreading of the dopants that comprise the well, punch-stop, and channel-stop when using high-temperature annealing processes, such as rapid thermal annealing (RTA). In this context, low-temperature deuterium annealing (LTDA) performed at a low temperature of 300℃ is proposed to reduce the thermal budget during CMOS fabrication. The LTDA effectively eliminates the interface trap in the gate dielectric layer, thereby improving the electrical characteristics of devices, such as threshold voltage (V_TH), subthreshold swing (SS), on-state current (I_ON), and off-state current (I_OFF). Moreover, the LTDA is perfectly compatible with CMOS processes.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권4호
• /
• pp.309-315
• /
• 2010

A fully-differential low-voltage low-power electrocardiogram (ECG) amplifier by using the nonfeedback PMOS pseudo-resistors is proposed. It consists of two operational-transconductance amplifiers (OTA) in series (a preamplifier and a variable-gain amplifier). To make it insensitive to the gate leakage current of the OTA input transistor, the feedback pseudo-resistor of the conventional ECG amplifier is moved to input branch between the OP amp summing node and the DC reference voltage. Also, an OTA circuit with a Gm boosting block without reducing the output resistance (Ro) is proposed to maximize the OTA DC gain. The measurements shows the frequency bandwidth from 7 Hz to 480 Hz, the midband gain programmable from 48.7 dB to 59.5 dB, the total harmonic distortion (THD) less than 1.21% with a full voltage swing, and the power consumption of 233 nW in a 0.13 ${\mu}m$ CMOS process at the supply voltage of 0.7 V.

• 대한전자공학회논문지SD
• /
• 제48권3호
• /
• pp.1-6
• /
• 2011

N-channel 산화물 박막 트랜지스터(Thin Film Transistor, 이하 TFT)만을 이용한 저소비전력 inverter, NAND, NOR의 논리 게이트 회로를 제안한다. 제안된 회로는 asymmetric feed-through와 bootstrapping을 이용해서 pull-up, pull-down 스위치가 동시에 켜지지 않도록 설계하였다. 그 결과로 출력신호 전압 범위가 입력신호 전압과 동일하고 정전류가 흐르지 않는다. 인버터는 5 개의 TFT와 2 개의 capacitor로, NAND 및 NOR 게이트는 각각 10 개의 TFT와 4 개의 capacitor로 구성된다. 산화물 TFT 모델을 사용하여 SPICE 시뮬레이션을 수행하여 제안된 회로의 동작을 성공적으로 검증하였다.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.97-101
• /
• 2017

In this paper, IGZO thin film transistor (TFT) was fabricated with cross-linked Poly (4-vinylphenol) (PVP) gate dielectric for flexible, transparent display applications. The PVP is one of the candidates for low-temperature gate insulators. MIM structure was fabricated to measure the leakage current and evaluate the insulator properties according to the annealing temperature. Low leakage current ( <0.1nA/cm2 @ 1MV/cm ) was observed at $200^{\circ}C$ annealing condition and decreases much more as the annealing temperature increases. The electrical characteristics of IGZO TFT such as subthreshold swing, mobility and ON/OFF current ratio were also improved, which shows that the performance of IGZO TFTs with PVP can be enhanced by reducing the amount of incomplete crosslinking in PVP.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권4호
• /
• pp.276-281
• /
• 2005

This paper presents a low voltage operating IF QPSK receiver block which is consisted of programmable gain amplifier (PGA) and analog to digital converter. This PGA has 6 bit control and 250MHz bandwidth, $0{\sim}20\;dB$ gain range. Using the proposed PGA architecture (low distortion gain control switch block), we can process the continuous fully differential $0.2{\sim}2.5Vpp$ input/output range and 44MHz carrier with 2 MHz bandwidth signal at 1.8V supply voltage. Using the sub-sampling technique (input freq. is $44{\sim}46MHz$, sampling freq. is 25MHz), we can process the IF QPSK signal ($44{\sim}46MHz$) which is the output of the 6 bit PGA. We can get the SNDR 35dB, which is the result of PGA and ADC at full gain mode. We fabricated the PGA and ADC and the digital signal processing block of the IF QPSK with the 0.18um CMOS MIM process 1.8V Supply.