• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.43-50
• /
• 2004

The clock skew is one of the major constraints for high-speed operation of synchronous integrated circuits. In this paper, we propose a hierarchical partitioning based clock network design algorithm called Advanced Clock Tree Generation (ACTG). Especially new effective partitioning and refinement techniques have been developed in which the capacitance and edge length to each sink are considered from the early stage of clock design. Hierarchical structures obtained by parhtioning and refinement are utilized for balanced clock routing. We use zero skew routing in which Elmore delay model is used to estimate the delay. An overlap avoidance routing algorithm for clock tree generation is proposed. Experimental results show significant improvement over conventional methods.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.1-8
• /
• 2004

A novol clock distribution scheme is proposed for high-speed and low-power digital system to minimize clock skew and reduce dynamic power consumption. This scheme has ideal zero-skew characteristic by using folded clock lines (FCL) and phase blending circuit. For analyzing suitable line structures to FCLs, microstrip line and coplanar line are placed with folded clock lines. Simulation results show that the maximum clock-skew between two receivers located 10mm apart is less than lops at 1㎓ and the maximum clock-skew between two receivers located 20mm apart is less than 60ps at 1㎓. Also the results show that the minimum skews of clock signals regardless of process, voltage, and temperature variation are invariant.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.495-497
• /
• 2013

Wireless sensor networks (WSNs) have emerged as an attractive and key research area over the last decade. Time synchronization is a vital part of infrastructure for any distributed system. In embedded sensor networks, time synchronization is an essential service for correlating data among nodes and communication scheduling. This is realized by exchanging messages that are time stamped using the local clocks on the nodes. Various time synchronization protocols have been proposed aiming to attain high synchronization accuracy, high efficiency and low communication overhead. However, it requires that the time between resynchronization intervals to be as large as possible to obtain a system which is energy efficient having low communication overhead. This paper presents a simple but effective skew compensation algorithm that measures the skew rate of the sensor nodes with respect to the reference node and calibrates itself to compensate for the difference in the frequencies of the nodes. The proposed method can be incorporated with any existing time synchronization protocol for WSNs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.286-292
• /
• 2008

Transverse flux machine (TFM) has been developed to drive a machine of large input power at low-speed. However, it has complicated structure and large torque ripple due to its inherent structure In this paper the characteristics of torque of a rotatory two-phase TFM are analyzed by using the 3-dimensional finite to element method and optimal design. This research shows that one of the effective design variables is the skew angle of permanent magnet. The skew angles of permanent magnet are optimized by using a Progressive Quadratic Response Surface Method (PQRSM). It also shows that the proposed optimal skew magnet not only increases average torque but also decreases torque ripple of a rotatory two-phase TFM.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.10
• /
• pp.1003-1011
• /
• 2009

Transverse flux machine(TFM) has been developed to drive a machine of large input power at low-speed. However, it has complicated structure and large torque ripple due to its inherent structure. In this paper the characteristics of torque of a rotatory two-phase TFM are analyzed by using the 3-dimensional finite element method and optimal design. This research shows that one of the effective design variables is the skew angle of permanent magnet. The skew angles of permanent magnet are optimized by using a genetic algorithm. It also shows that the proposed optimal skew magnet not only increases average torque but also decreases torque ripple of a rotatory two-phase TFM.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.3
• /
• pp.13-19
• /
• 2014

Phosphoric acid was used as etching agent instead of conventional peroxide - based chemicals for forming pattern of ultra definition display. Etchant was synthesized by mixing etching agent, oxidation agent, buffer solution, and additive into solvent, deionized water. Thicknesses of copper, main metal of ultra definition display, for etching, were 10,000 and $30,000{{\AA}}$. Etch stop of good low skew for proper pattern formation has been occurred at the content ratio of phosphoric acid 60 - 64%, nitric acid 4 - 5%, additive(potassium acetate) 1 - 3%. Buffer solution(acetic acid) decreased the metal contact angle $63.07^{\circ}$ to $42.49^{\circ}$ for benefiting pattern formation. Content variations on four components (phosphoric acid, nitric acid, acetic acid, potassium acetic acid) of the etchant with storage time were within 3 wt% after 24 hrs of etching work.

• The Korean Journal of Applied Statistics
• /
• v.30 no.3
• /
• pp.363-376
• /
• 2017

The insurance market is saturated and its growth engine is exhausted; consequently, the insurance industry is now in a low growth period with insurance companies that face a fierce competitive environment. In such a situation, it will be an important issue to find the probability distributions that can explain the flow of insurance claims, which are the basis of the actuarial calculation of the insurance product. Insurance claims are generally known to be well fitted by lognormal distributions or Pareto distributions biased to the left with a thick tail. In recent years, skew normal distributions or skew t distributions have been considered reasonable distributions for describing insurance claims. Cooray and Ananda (2005) proposed a composite lognormal-Pareto distribution that has the advantages of both lognormal and Pareto distributions and they also showed the composite distribution has a higher fitness than single distributions. In this paper, we introduce new composite distributions based on skew normal distributions or skew t distributions and apply them to Danish fire insurance claim data and US indemnity loss data to compare their performance with the other composite distributions and single distributions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.3
• /
• pp.296-303
• /
• 2014

The Axiom propeller is a unique 3 bladed propeller and it enables to generate the same amount of thrust going ahead as it does going astern because of its 's' type skew-symmetric blade section. A earlier variant of the design (Axiom I propeller) performed a low propeller efficiency, maximum 35 % efficiency, and further blade outline design was carried out to achieve a higher efficiency. The optimized new blade outline (Axiom II propeller) has more conventional Kaplan geometry shape than Axiom I propeller. Model tests of open water performance and propeller cavitation for both propellers were conducted at Emerson Cavitation Tunnel in order to compare their performances. Experiment results revealed that Axiom II propeller provides a maximum 53 % efficiency and provides better efficiency and cavitation performance over the Axiom I propeller under similar conditions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.7
• /
• pp.75-80
• /
• 2014

The small wind turbines has the merits of setting up with low costs by individuals, and get the energy saving effects that, it has the secured, separate markets from the big range systems, and the developing of it is continuously proceeding. The objective of this paper is to provide the design characteristics analysis of a permanent magnet synchronous generator(PMSG) skewed for magnet of rotor, the main advantage to be explored with the use of a split core design is the reduction in manufacturing costs and its simplicity in manufacture, compared to the manufacturing costs of a core skew PM machine. This thesis is aiming mainly analyzing the characteristics of the prototype to verify through Finite Element Method(FEM) and tests.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.3 s.46
• /
• pp.291-302
• /
• 2000

In recent years the development of high modulus, high strength and low density boron and graphite fibers bonded together has brought renewed interestes in structural elements. When a plate with arbitrarily oriented layers and clamped boundary conditions is subjected to uniform loading, it is difficult to analyze and apply, compared with isotropic and orthotropic cases. Therefore the numerical methods, such as finite difference method or finite element method, should be emloyed to analyse such problems. In this study the finite difference technique is used to formulate the bending analysis of symmetric composite laminated skew plates. When this technique is used to solve the problem, it is desirable to reduce the order of the derivatives in order to minimize the number of the pivotal points involved in each equation. The 4th order partial differential equations of laminated skew plates are converted to an equivalent three of 2nd order partial differential equations with three dependant variables.