• Korean Journal of Remote Sensing
• /
• v.35 no.6_4
• /
• pp.1417-1424
• /
• 2019

Recently, disaster accidents have occurred frequently over the world, and disaster have been continuously studied using remote sensing due to large scale and hard-to-reach features. The collapse of Laos Xe pian-Xe namnoy dam in 2018 also caused a lot of human and economic damage. This study's purpose is to change detect water system due to the collapse of Xe pian-Xe namnoy dam in Laos and to derive areas where future flooding is expected. The water system is extracted from each image of KOMPSAT-5 before and after the dam collapse in order to quantitatively change detect in the water system. The result of the water system area increased more than 10 times after the dam collapse. In addition, it is confirmed that the newly created water system is thickly created in areas of low altitude area. This study result can be used in the future to systematize the pre-response to abnormalities and issues in existing operating dams. And then, if combined with other remote sensing data, more diverse and specific results could be obtained.

• Journal of Practical Engineering Education
• /
• v.14 no.2
• /
• pp.387-392
• /
• 2022

To participate in global carbon neutrality, the Korean government is also planning to carry out zero-energy building certification for all buildings by 2030 through the enforcement decree of the 'Green Building Support Act'. Accordingly, the government is providing various projects related to solar power generation, which are relatively close to life. In particular, roof-mounted photovoltaic power generation systems are attracting attention in terms of using unused space to produce energy without destroying the environment, but low power generation efficiency compared to other photovoltaic power generation facilities is pointed out as a disadvantage. Therefore, in this paper, to solve this problem, we propose an efficient solar panel angle variable system through research on the solar panel structure for single-axial solar tracking, and also consider the application environment of the roof-mounted solar power generation system. Suggests measures to prevent damage and secondary damage. In addition, it is judged that it is possible to control the solar panel based on ICT convergence and configure the accident prediction safety system to link the project-based education program.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.86-93
• /
• 2023

Pyrotechnic separation devices have been widely used as holding and release mechanism for deployable appendage. However, pyro-shock can cause temporal or permanent damage on shock sensitive components such as electronics, mechanism, and brittle components. This study proposed a low-stiffness blade based passive shock absorber using a multi-layered stiffener laminated with viscoelastic acrylic tapes for reducing transmitted pyro-shock upon explosion of pyrotechnic separation devices. The multi-layered structure with viscoelastic tape has high-damping characteristics to effectively secure structural integrity of low-stiffness blades under the launch environment. The design effectiveness was verified through a shock test by dropping a pendulum. The structural integrity of the shock absorber under a launch environment was evaluated through structural analysis under load conditions with a deployable payload.

• Journal of the Korea Convergence Society
• /
• v.10 no.10
• /
• pp.107-115
• /
• 2019

Effective construction safety management systems are desperately required for reducing damage caused by increasing safety accidents in construction sites. Safety accidents in construction sites can effectively protect if proactive measures are taken to prevent unauthorized worker access the expected hazardous area. In this study, we have developed a IoT(Internet of Things)-based dangerous zone alarming system for safety management in construction sites, which can be operated at low cost in large-scale sites as well as small and medium-sized construction sites. The development system utilizes a Zigbee-based beacon technology and cellular mobile communication technology to detect when authorized workers, unauthorized field workers or outsiders approaches hazardous zones. If somebody approaches the dangerous zones the system notifies immediately to the safety manager with a danger warning signal. It is expected that this system can effectively prevent safety accidents when applied to construction sites.

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.626-634
• /
• 2012

There are variations among grapevine genotypes in the levels of tolerance to cold, and cold-hardiness of grapevine has been affected by the change of short-term environment during over-wintering. In this study, the responses of vines to cold in open field and rain-shelter system were investigated to obtain useful information in increasing the tolerance to cold in grape cultivation. Total carbohydrate content of bearing mother branches was higher in the rain-shelter system than in the open field, and lower in the branches of 'Muscat Bailey A' than in 'Campbell Early' and 'Kyoho'. Bud-burst and shoot growth were better in the rain-shelter system than in open field, whereas there is no significant difference among the treatments of net beside vines. There was also low incidence of gray mold in rain shelter system. Stilbene compounds such as t-piceid, resveratrol, piceatannol, c-piceid were accumulated in the cold-treated shoot from vine cuts harvested in rain shelter system. Genes of chalcone isomerase, manganese superoxide dismutase, proline rich protein 2, and temperature induced lipocalin were highly expressed in the cold-treated shoot from vine cuts harvested in rain shelter system. While there was not change of air temperature, but high reduction of wind speed in the rain shelter system compared to open field, and increase in the reduction of wind speed by net treatment. The damage of grapevines by cold in the extreme low temperature could be reduced by keeping them in the rain shelter system with net during winter season.

• Clinical and Experimental Pediatrics
• /
• v.60 no.12
• /
• pp.403-407
• /
• 2017

Purpose: Quadriplegic children with cerebral palsy are more susceptible to osteoporosis because of various risk factors that interfere with bone metabolism. Pamidronate is effective for pediatric osteoporosis, but there are no guidelines for optimal dosage or duration of treatment in quadriplegic children with osteoporosis. We aimed to evaluate the efficacy of low-dose pamidronate treatment in these patients. Methods: Ten quadriplegic patients on antiepileptic drugs (6 male, 4 female patients; mean age, $10.9{\pm}5.76years$), with osteoporosis and gross motor function classification system level V, were treated with pamidronate (0.5-1.0 mg/kg/day, 2 consecutive days) every 3-4 months in a single institution. The patients received oral supplements of calcium and vitamin D before and during treatment. The lumbar spine bone mineral density (BMD) z score and biochemical markers of bone metabolism were measured regularly during treatment. Results: The main underlying disorder was perinatal hypoxic brain damage (40%, 4 of 10). The mean cumulative dose of pamidronate was $4.49{\pm}2.22mg/kg/yr$, and the mean treatment period was $10.8{\pm}3.32months$. The BMD z score of the lumbar spine showed a significant increase from $-4.22{\pm}1.24$ before treatment to $-2.61{\pm}1.69$ during treatment (P=0.008). Alkaline phosphatase decreased during treatment (P=0.037). Significant adverse drug reactions and new fractures were not reported. Conclusion: Low-dose pamidronate treatment for quadriplegic children with cerebral palsy increased lumbar BMD and reduced the incidence of fracture.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.28-28
• /
• 2010

This study realized low-temperature crystallization process of the $Ba_{0.6}Sr_{0.4}TiO_3$ (BST) thin films without thermal damage of substrate using excimer laser annealing (ELA) and structural and electrical characteristics were investigated. The amorphous BST thin films were prepared on Pt/Ti/$SiO_2$/Si substrate by sol-gel method at $250^{\circ}C$. The ELA was carried out using KrF excimer laser which provided excitation wavelength of 248 nm. The beam homogenizing system was used in order to homogenize beam shape of Gaussian fit. The XRD and SEM were used to analyze structural characteristics and the microwave capacitance, dielectric loss and tunability of the BST films were measured by a symmetrical stripline resonator method with shorted end. Consequently, the crystallinity of BST thin films were improved after ELA process and RF tunable capacitor was demonstrated at low temperature below $300^{\circ}C$.

• Earthquakes and Structures
• /
• v.18 no.5
• /
• pp.649-665
• /
• 2020

One of the most important issues in structural systems is evaluation of the margin of safety in low and mid-rise buildings against the progressive collapse mechanism due to the earthquake loads. In this paper, modeling of collapse propagation in structural elements of RC frame buildings is evaluated by tracing down the collapse points in beam and column structural elements, one after another, under earthquake loads and the influence of column removal is investigated on how the collapse expansion in beam and column structural members. For this reason, progressive collapse phenomenon is studied in 3-story and 5-story intermediate moment resisting frame buildings due to the corner and edge column removal in presence of the earthquake loads. In this way, distribution and propagation of the collapse in progressive collapse mechanism is studied, from the first element of the structure to the collapse of a large part of the building with investigating and comparing the results of nonlinear time history analyses (NLTHA) in presence of two-component accelograms proposed by FEMA_P695. Evaluation of the results, including the statistical survey of the number and sequence of the collapsed points in process of the collapse distribution in structural system, show that the progressive collapse distribution are special and similar in low-rise and mid-rise RC buildings due to the simultaneous effects of the column removal and the earthquake loads and various patterns of the progressive collapse distribution are proposed and presented to predict the collapse propagation in structural elements of similar buildings. So, the results of collapse distribution patterns and comparing the values of collapse can be utilized to provide practical methods in codes and guidelines to enhance the structural resistance against the progressive collapse mechanism and eventually, the value of damage can be controlled and minimized in similar buildings.

• Journal of Biosystems Engineering
• /
• v.30 no.3 s.110
• /
• pp.147-154
• /
• 2005

The improved hitch device, which connecting the trailer to power tiller, was developed. This device, composed with spring and rubber, could reduce the vibration and shock levels during driven on off-road. The vertical vibration accelerations for the improved hitch device were measured at 6 positions, i.e. engine, hitch, seat, and three points in trailer (front, middle, and rear) for not driving but at low engine speed of 500 rpm, and compared with the existing hitch device. The results of this study could be summarized as follows; The average vibration acceleration up to 120 Hz was $0.4m/s^2$ at engine part, but it was 0.08 and $0.05m/s^2$ at trailer for existing and improved hitch device, respectively. About $38\%$ of average acceleration level could be absorbed for the improved hitch device compared with existing hitch device. The average vibration acceleration up to 40 Hz was reduced to 0.12 and $0.06m/s^2$ at trailer for existing and improved hitch device respectively, showing the reduction effect of $50\%$. The maximum acceleration occurred at up to 20 Hz of low frequency was much higher than total acceleration occurred at up to 120 Hz, which means that much loss or damage could be occurred during transporting of agricultural products on off-road. The portions of average acceleration occurred at up to 20 Hz of low frequency were $27\%\;and\;21\%$ for the existing and improved hitch device, respectively.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1159-1160
• /
• 2006

As the grid-connected photovoltaic power conditioning systems (PVPCS) are installed in many residential areas, this has raised potential problems of network protection on electrical power system. One of the numerous problems is an Island phenomenon. There has been an argument that because the probability of islanding is extremely low it may be a non-issue in practice. However, there are three counter-arguments: First, the low probability of islanding is based on the assumption of 100% power matching between the PVPCS and the islanded local loads. In fact, an island can be easily formed even without 100% power matching (the power mismatch could be up to 30% if only traditional protections are used, e.g. under/over voltage/frequency). The 30% power-mismatch condition will drastically increase the islanding probability. Second, even with a larger power mismatch, the time for voltage or frequency to deviate sufficient to cause a trip, plus the time required to execute the trip (particularly if conventional switchgear is required to operate), can easily be greater than the typical re-close time on the distribution circuit. And, third, the low-probability argument is based on the study of PVPCS. Especially, if the output power of PVPCS equals to power consumption of local loads, it is very difficult for the PVPCS to sustain the voltage and frequency in an island. Unintentional islanding of PVPCS may result in power-quality issues, interference to grid-protection devices, equipment damage, and even personnel safety hazards. So the verification of anti-islanding performance is strongly needed. In this paper, the authors propose the improved RPV method through considering power quality and anti-islanding capacity of grid-connected three-phase PVPCS in IEEE Std 1547 ("Standard for Interconnecting Distributed Resources to Electric Power Systems"). And the simulation and experimental results are verified.