• 한국소음진동공학회논문집
• /
• 제23권4호
• /
• pp.356-364
• /
• 2013

This paper presents a tracking gain-up controller design method to control effectively the vibration of tracking actuator caused by external shocks and remaining velocity after seek control. A pole placement constraint is considered to assure a desired transient response against the vibration of tracking actuator. A loop gain-up constraint is introduced to hold the tracking gain-up loop gain and control bandwidth within allowable bounds. The pole placement constraint is expressed by a matrix inequality and the loop gain-up constraint is considered as an objective function so that genetic algorithm can be applied. Finally, a tracking gain-up controller is obtained by integrating a genetic algorithm with LMI design approach. The proposed tracking gain-up controller design method is applied to the track-following system of a DVD recording device and its effectiveness is evaluated through the experimental results.

• 제어로봇시스템학회논문지
• /
• 제17권7호
• /
• pp.619-624
• /
• 2011

This paper presents a controller design method for a robust control problem with multiple constraints using genetic algorithms and LMI design method. A robust $H_{\infty}$ constraint with loop shaping and pole placement is used to address disturbance attenuation with error limits and desired transient specifications, in spite of the plant uncertainties and disturbances. In addition, a loop gain constraint is considered so as not to enlarge the loop gain unnecessarily. The robust $H_{\infty}$ constraint and pole placement constraint can be expressed in terms of two matrix inequalities and the loop gain constraint can be considered as an objective function so that genetic algorithms can be applied. Accordingly, a robust controller can be obtained by integrating genetic algorithms with LMI approach. The proposed controller design method is applied to a track-following system of an optical disk drive and is evaluated through simulation results.

• 한국소음진동공학회논문집
• /
• 제22권3호
• /
• pp.275-283
• /
• 2012

This paper presents a design method of a robust tracking controller satisfying multiple constraints using genetic algorithm. A robust $H_{\infty}$ constraint with loop shaping is used to address disturbance attenuation with error limits and a loop gain constraint is considered so as not to enlarge the tracking loop gain and bandwidth unnecessarily. The robust $H_{\infty}$ constraint is expressed by a matrix inequality and the loop gain constraint is considered as an objective function so that genetic algorithm can be applied. Finally, a robust tracking controller can be obtained by integrating genetic algorithm with LMI approach. The proposed tracking controller design method is applied to the track-following system of an optical DVD recording drive and is evaluated through the experimental results.

• 한국소음진동공학회논문집
• /
• 제25권5호
• /
• pp.361-368
• /
• 2015

This paper deals with a robust fine seek controller design problem with multiple constraints using a genetic algorithm. A robust $H\infty$ constraint is introduced to attenuate effectively velocity disturbance caused by the eccentric rotation of the disk. A weighting function is optimally selected based on the estimation of velocity disturbance and the estimated minimum velocity loop gain. A robust velocity loop constraint is considered to minimize the variances of the velocity loop gain and bandwidth against the uncertainties of fine actuator. Finally, a robust fine seek controller is obtained by solving a genetic algorithm with an LMI condition and an appropriate objective function. The proposed controller design method is applied to the fine seek control system of a DVD recording device and is evaluated through the experimental results.

• 제어로봇시스템학회논문지
• /
• 제15권10호
• /
• pp.988-993
• /
• 2009

In this paper, we deal with a tracking gain-up controller design problem to control effectively the shake of tracking actuator after a track seek. A minimum tracking gain-up open-loop gain can be calculated by estimating the shake of tracking actuator and a desired transient specification is considered to diminish effectively the shake of actuator. A tracking gain-up controller is designed by considering a robust $H_{\infty}$ control problem with a regional stability constraint. The proposed tracking gain-up controller design method is applied to the track-following system of a DVD recording device and is evaluated through the experimental results.

• 대한기계학회논문집
• /
• 제10권3호
• /
• pp.376-382
• /
• 1986

본 연구에서는 절삭과정의 정적특성에 관한 식과 그에 포함된 계수를 실험을 통하여 결정함으로써 절삭과정을 모델링하고, 절삭시에 검출되는 주절삭력에 따라 이 송속도를 제어하며 절삭과정의 변동에 관계없이 시스템의 안정을 보장하는 제어 프로 그램 및 제어장치를 개발하여 선삭작업에 응용하여 보고자 한다.

• International Journal of Control, Automation, and Systems
• /
• 제5권6호
• /
• pp.621-629
• /
• 2007

In the adaptive fuzzy control field for affine nonlinear systems, there are two basic configurations: direct and indirect. It is well known that the direct configuration needs more restrictions on the control gain than the indirect configuration. In general, these restrictions are difficult to check in practice where mathematical models of plant are not available. In this paper, using a simple extension of the universal approximation theorem, we show that the only required constraint on the control gain is that its sign is known. The Lyapunov synthesis approach is used to guarantee the stability and convergence of the closed loop system. Finally, examples of an inverted pendulum and a magnet levitation system demonstrate the theoretical results.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권9호
• /
• pp.520-525
• /
• 2000

This paper deals with the design of H$\infty$ control for uncertain linear systems with the regional eigenvalue assignment constraint. The considered region is a disk in the left half plane and the two types of time-varying uncertainties are considered. We presents a state feedback control that minimize the L2 gain from the disturbance to the measured output as well as it guarantees that all eigenvalues of closed loop are inside a disk. The state feedback control is obtained by checking the feasibility of linear matrix inequalities (LMI's) which are numerically tractable. Finally we give an example to show the applicability and usefulness of our results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1131-1133
• /
• 1996

In this paper, we consider the mixed $L_1/H_{\infty}$ problems of finding internally stabilizing controllers which minimize the peak-to-peak gain of a certain closed loop transfer function with $H_{\infty}$-norm constraint on other closed loop transfer function(or vise versa). This problem is a useful framework for designing a controller with the norm constraints upon time and frequency domain. We formulate the mixed $L_1/H_{\infty}$ problem as LMI problems by using the reachable set. This paper offers the sufficient condition for the existence of suboptimal state feedback controller, and shows that suboptimal solution can be obtained by solving a finite-dimensional convex optimization and a line search.

• 한국정보통신학회논문지
• /
• 제10권1호
• /
• pp.15-22
• /
• 2006

OFDMA 시스템에서 단말기는 기지국과 같이 최소 1개부터 최대일 때 부채널 전부를 사용할 수 있지만 단말기의 송신전력은 기지국보다 낮게 설계되기 때문에 부채널 전부를 사용할 수 있는 거리(FLR : full loading range)의 제한이 생기고 FLR 외부에 위치한 단말은 기존의 개방루프 전력제어 방식을 사용할 수 없는 문제가 발생한다. 본 논문에서는 OFDMA 시 스템의 ranging 정보를 이용하여 단말기의 위치를 파악하고 단말기의 위치에 따라서 사용가능한 부채널수를 제한하고 PCG(power concentration gain)를 인가하는 방식을 제안하였다. 시뮬레이션을 통한 실험 결과에서 제안된 방식은 단말기의 위치에 따라서 상향링크 무선자원의 최적 활용을 가능하게 하며 FLR 외부에서 개방루프 전력 제어가 별도의 하드웨어 없이 가능함을 확인하였다.