• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.1
• /
• pp.15-21
• /
• 2004

This paper deals with asymptotic stabilization problems for linear systems with time-varying input disturbances. In order to eliminate the influence of a disturbance on the system, a disturbance observer is designed and the time-varying disturbance can be rejected using its estimated value. Since the disturbance observer is kind of low-pass filter, it has inevitably estimation errors. To eliminate the inflences on the performance due to these errors, the additional control is designed based on these estimation errors using a well-known min-max control method. It is shown that the asymptotic stability of the closed-loop system is guaranteed. In general, the min-max control method requires the switching of control inputs and the switching magnitude of the control input is determined by the disturbance estimation error bounds. As the error bounds can be made arbitrarily small by choosing the high gain for the disturbance observer, the control method suggested in this paper can reduce the chattering phenomena as small as possible. Therefore, it has superior performance to the existing ones.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.11
• /
• pp.998-1003
• /
• 2013

This study proposes an adaptive control algorithm for lateral motion of a UGV (Unmanned Ground Vehicle) using an NN (Neural Networks). The lateral motion of the UGV can be corrupted with various uncertainties such as side slip. In order to compensate the performance degradation of the UGV under various uncertainties, an NN-based adaptive control is designed by utilizing a virtual control concept. Since both the drift and input gain terms are uncertain, the proposed method adapts the whole terms related to the difference between the nominal and real systems. To avoid a singularity problem with the adaptive control, the affine property of the UGV dynamic model is utilized and the overall closed-loop stability is analyzed rigorously. Finally, numerical simulations using Carsim are performed to validate the effectiveness of the proposed scheme.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.1
• /
• pp.40-45
• /
• 1991

It is well known that the conventional differential source-coupled pair uses gates as its input terminals. This input pair provids a high open-loop gain, a large CMRR, and a good PSRR. For these reasons, the input pair has been used widely as an input stages of the differential amplifiers, but a narrow linear input range of this structurelimits its application in the area of some analog circuit design. A novel CMOS source-coupled backgate pair is proposed in this paper. The bulk of MOSFET is exploited and input devices are biased to operate in ohmic region. With this topology, the backgate pair of the wide linear input range and variable transconductance can be obtained. This backgate input differential stage is realized with the size of W/L=50/25 MOSFETs. The results show the nonlinear error is less than $\gamma$1% over 10V full-scale range for the bias current of 200$\mu$A with 10V single power-supply.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.11
• /
• pp.1190-1196
• /
• 2014

This paper presents the design of a Frequency Modulated Continuous Wave(FMCW) radar altimeter with wide altitude range and low measurement errors. Wide altitude range is achieved by employing the optic delay in the transmitting path to reduce the dynamic range of measuring altitude. Transmitting power and receiver gain are also controlled to have the dynamic range of the received power be reduced. In addition, low measurement errors are obtained by improving the sweep linearity using the Direct Digital Synthesizer(DDS) and minimizing the phase noise employing the reference clock(Ref_CLK) as the offset frequency of the Phase Locked Loop(PLL).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.12
• /
• pp.1170-1176
• /
• 2010

This study addresses adaptive control of UAVs(Unmanned Aerial Vehicles) pitch-axis maneuver. The MRAC(Model Referenced Adaptive Control) approach is employed to accommodate uncertainties which are introduced by feedback linearization of pitch attitude control by elevator input. The model uncertainty is handled by adaptation laws which update model parameters while the UAV is under control by the feedback control law. Steady-state pitch attitude achieved by the stabilizing control law is derived to provide insight on the closed-loop behavior of the controlled system. The proposed idea is free of linearization, gain-scheduling procedures, so that one can design high maneuverability of UAVs for pitching motion in the presence of significant model uncertainty.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.1
• /
• pp.37-47
• /
• 2005

This Paper proposes a practical design and implementation methodology for a disturbance rejection controller. In a 2 Degree-Of-Freedom (DOF) structure, disturbance rejection performance can be improved without a high gain in forward-loop controller which might cause unwanted side-effects in conventional controller. But, since design methodology of 2 DOF controller is originally derived from the 2 DOF theory, it is not easy to utilize fer various industrial applications. Disturbance observer is a simple, but very effective 2 DOF controller. In this paper, practical issues are discussed from basic idea of DOB to technical procedure for design and implementation. Additionally, a methods and their examples of experimental modeling are explained. The proposed method is demonstrated by two examples of linear-type motor systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.397-402
• /
• 2009

Accurate estimation of time-selective fading channel is a difficult problem in OFDM(Orthogonal Frequency Division Multiplexing) system. There are many channel estimation algorithms that are very weak in noisy channel. For solving this problem, we use EM (Expectation-Maximization) algorithm for iterative optimization of the data. We propose an EM-LPC algorithm to estimate the time-selective fading. The proposed algorithm improves of the BER performance compared to EM based channel estimation algorithm and reduces the iteration number of the EM loop. We simulated the uncoded system. If coded system use the EM-LPC algorithm, the performance are enhanced because of the coding gain. The EM-LPC algorithm is able to apply to another communication system, not only OFDM systems. The image processing of the medical instruments that the demand of accurate estimation can also use the proposed algorithm.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.423-429
• /
• 2011

This paper deals with the observer-based decentralized fuzzy controller design for nonlinear interconnected system for PEMFC. The nonlinear interconnected system is represented by a Takagi-Sugeno (T-S) fuzzy model. Based on T-S fuzzy interconnected system, the fuzzy observer and the decentralized fuzzy controller are designed. The stability condition of the closed-loop system with the proposed controller is represented to the linear matrix inequality (LMI) form, and the observer and control gain s are obtained by LMI. An example is given to show the verification discussed throughout the paper.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.5
• /
• pp.65-73
• /
• 2008

Retaining large stability margin is essential in designing a feedback control system to deal with the uncertainties inherently existing in the mathematical model and the control apparatus. The LQG controller in general loses the stability margin due to the embed Kalman filter. The performance of a control system called LTR with a DUOX structure(LTR/DOUX) to overcome the demerit of LQG controller is to be investigated from the responses in both the time and the frequency domain. The results indicated that the LTR/DOUX recovered the gain margin of 30dB approximately 20 times more than that of LQG/DOUX, resulting in a robust stable control system.

• Korean System Dynamics Review
• /
• v.14 no.3
• /
• pp.51-74
• /
• 2013

Recently, Community Rebuilding Projects (hereinafter CRPs) in Korea have been driven and motivated by community inhabitants by themselves, and highlighted as an alternative approach to overcome the limitation revealed normally in top-down projects of community vitalization by the Government. The CRPs encourage community-lead development because it happens to integrate multiple stakeholders and to help inhabitants to participate in the process of the CRPs by accumulating and enlarging social capital and network among inhabitants, and the social gain consequently raises the efficiency of public investment in revitalizing communities. In this study, the series of Causal Loop Diagrams (CLDs) is to be elaborated and the System-Thinking (ST) approach is to be presented to understand the dynamic characteristics residing in the above development process of rebuilding communities. The ST approach refers to the CLDs analyzing 19 remarkable Korean CRP cases, and leads to a conclusion including some of policy instruments to support the bottom-up CRPs in Korea. This study contributes a theoretical framework to understand the dynamic relation between social capital and community revitalization as well as empirical suggestions to respond to the issues of the CRPs in Korean local governments.