• 대한전기학회논문지
• /
• 제39권1호
• /
• pp.29-35
• /
• 1990

This paper proposes a tow-dimensional magnetic flux distribution analysis of the double-sided linear induction motor(DLIM). Both the longitudinal end-effect and the transverse edge-effect, which are due to the finite length and width of the primary stator, are considered. Also each force which is due to the variation of slip frequency was computed to show the fact that the thrust force of DLIM is dependent on both the longitudinal end-effect and the transverse edge-effect. To ascertain the propriety of this analysis, the simulated results of the magnetic flux density distribution in the airgap are compared to the experimental data.

• Journal of the Korean Wood Science and Technology
• /
• 제44권5호
• /
• pp.677-684
• /
• 2016

본 연구에서는 배할과 자상-인사이징 처리가 두께 15 cm 크기 소나무 정각재의 고온건조 특성에 미치는 영향을 확인하기 위해 수행되었다. 건조 후 최종함수율은 5.6% ~ 7.5% 범위였으며, 전처리조건에 따른 함수율분포에 차이는 없는 것으로 조사되었다. 배할의 경우 재면할렬 발생을 감소시키는 것이 가능하였으며, 뒤틀림은 약간 감소되는 경향을 나타내었다. 배할과 자상-인사이징 처리는 내부할렬과 건조 수축률에 영향을 미치지 않는 것으로 나타났다.

• 상하수도학회지
• /
• 제20권5호
• /
• pp.667-676
• /
• 2006

This study was conducted to evaluate the effect of longitudinal baffle on hydrodynamic behavior within a certain full-scale sedimentation basin (flow rate per basin; $1,000m^3/d$). Comparative experimental investigations have been carried out on the sediment removal efficiencies and the sludge deposit distribution in the baffled and un-baffled sedimentation basin, respectively. From the results derived in the baffled and un-baffled sedimentation, the turbidity removal rate in the baffled sedimentation basin is about 38% higher than that in un-baffled. Also, the height of sludge deposit in the baffled sedimentation basin is approximately 20% lower, and the sludge concentration is 10% higher than those in un-baffled sedimentation basin. In order to explain the experimental results and investigate the effect of longitudinal baffle in more detail, we conducted Computational Fluid Dynamics (CFD) simulation. From the results of CFD simulation, the flow, especially in the near of outlet orifice, was more stable in the case of longitudinal baffled sedimentation basin than that in un-baffled basin. Also, it could be concluded that the longitudinal baffle made a fully developed flow more effective for sedimentation.

• 한국강구조학회 논문집
• /
• 제13권6호
• /
• pp.621-629
• /
• 2001

본 연구에서는 국내에 적용된 종리브 현장연결부의 구조상세를 검토하고 실험체를 제작하여 정적재하실험 및 피로실험을 실시하였다. 정적 및 영향면 재하실험을 통하여 강상판 현장연결부의 응력분포양상을 분석하여 핸드홀 덮개판의 유무와 편심하중의 영향을 살펴보았다. 극한강도 실험을 통해서는 종리브 현장연결부의 극한내력을 평가하였다. 피로실험을 수행한 결과, 낮은 응력수준에서는 스캘럽부에서 피로균열이 발생하였고, 높은 응력수준에서는 핸드홀 덮개판의 파괴 후에 종리브의 갑작스런 파괴가 일어났다. 본 연구를 통하여 현장연결부의 거동특성의 이해를 위한 기초적 연구를 수행하였다.

• 한국습지학회지
• /
• 제11권2호
• /
• pp.89-98
• /
• 2009

본 연구는 하천종단면에 정보엔트로피이론을 적용하여 평균하천경사, 하천경사 및 하천종단고도 결정방법을 제시하였다. 최대화된 엔트로피는 제약조건하에서 일정한 하천종단면의 확률분포를 만들며, 이와 같은 관계를 이용하여 평균하천경사, 하천경사 및 하천종단고도 산정식을 유도하였다. 충북 지방하천 정비기본계획에서 얻은 달천유역의 실측된 지형학적 인자를 사용하여 매개변수를 최소자승법으로 결정하였다. 유도된 평균하천경사와 하천종단고도식을 실제유역에 적용하였으며, 실측치와 잘 일치함을 나타낸다. 본 연구의 결과로부터 평균하천경사와 하천종단고도의 결정에 직접 적용할수 있을 것으로 판단된다.

• Communications for Statistical Applications and Methods
• /
• 제24권3호
• /
• pp.255-269
• /
• 2017

This article explores the analysis of longitudinal surveys in which same units are investigated on several occasions. Multivariate exponential ratio type estimator has been proposed for the estimation of the finite population median at the current occasion in two occasion longitudinal surveys. Information on several additional auxiliary variables, which are stable over time and readily available on both the occasions, has been utilized. Properties of the proposed multivariate estimator, including the optimum replacement strategy, are presented. The proposed multivariate estimator is compared with the sample median estimator when there is no matching from a previous occasion and with the exponential ratio type estimator in successive sampling when information is available on only one additional auxiliary variable. The merits of the proposed estimator are justified by empirical interpretations and validated by a simulation study with the help of some natural populations.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권4호
• /
• pp.342-348
• /
• 1997

In this paper, the behavior of electron swarm parameters and energy distribution function of the discharge under high E/N condition in e$^{-10}$ -CF$_{4}$ gas have been analysed over the E/N range from 1-300(Td) by the MCS and BEq methods using set of electron collision cross section determined by the authors. The swarm parameters and energy distribution function have been calculated for the pulsed Townsend, steady-state Townsend and Time of Flight methods. The results gained that the value of electron swarm parameters such as the electron drift velocity, the electron ionization and attachment coefficients and longitudinal diffusion coefficients in agreement with the experimental and theoretical data for a range of E/N. The electron energy distribution function has been explained and analysed in e$^{-10}$ -CF$_{4}$ at E/N : 5, 10, 100, 200, 300(Td) for a case of the equilibrium region in the mean electron energy and respective set of electron collision cross sections. The validity of the results has been confirmed by TOF and SST methods.

• 아동학회지
• /
• 제26권5호
• /
• pp.263-279
• /
• 2005

This study explored the participant roles and the cross-sectional and longitudinal relationships between interpersonal behavior characteristics and bullying/victimization. The subjects were 4th and 5th grade children and instruments were the Participant Roles Scale, Self-Report Coping Scale, Teenage Inventory of Social Skills, and Social Anxiety/Avoidance. They were contacted again one year later. In the distribution of participant roles at Time 1, defender of the victim was highest, then outsider; at Time 2 outsider was the highest and then defender. There was a tendency of gender difference in distribution of participant roles only at Time 1. Males were more in the group of reinforcer; females were more in the group of defender and victim. There were high positive correlations among bully/reinforcer/assistant scores. In the concurrent view, children who used approach coping strategies and showed higher social skills were more likely to be defender. Children who had lower social skills and higher social anxiety and social avoidance were more likely to be victim. In the longitudinal view, children who had developed higher social skills were more likely to be defender. Children who had employed less approach coping strategies and had showed lower social skills and higher social avoidance were more likely to be victim.

• 응용통계연구
• /
• 제30권2호
• /
• pp.203-213
• /
• 2017

우리는 이변량 경시적 자료의 조건부 결합 분포를 추정하기 위하여 회귀 모형과 코플라 모형을 연구하였다. 주변 분포의 추정을 위하여 시변 변환 모형을 고려하였고, 이변량 반응변수 각각에 대한 주변 분포를 가우시안 코플라를 이용하여 결합하여 조건부 결합 분포를 추정하였다. 우리가 제안한 모형은 조건부 평균 모형만으로 자료를 설명하기 어려운 경우에 적용될 수 있다. 시변 변환 모형과 가우시안 코플라 모형을 결합한 본 논문의 방법은 반복 측정된 이변량 경시적 자료에 대한 모형화가 용이하며 해석하기 쉬운 장점이 있다. 우리는 본 논문의 방법을 반복 측정된 이변량 콜레스테롤 자료를 분석하는데 적용하여 보았다.

• Steel and Composite Structures
• /
• 제30권6호
• /
• pp.567-576
• /
• 2019

Time-dependent creep analysis of a rotating functionally graded cantilever beam with trapezoidal longitudinal cross section subjected to thermal and inertia loading is investigated using first-order shear deformation theory (FSDT). The model described in this paper is a simple simulation of a turbine blade working under creep condition. The material is a metal based composite reinforced by a ceramic where the creep properties of which has been described by the Sherby's constitutive model. All mechanical and thermal properties except Poisson's ratio are assumed to be variable longitudinally based on the volume fraction of constituent. The principle of virtual work as well as first order shear deformation theory is used to derive governing equations. Longitudinal distribution of displacements and stresses are investigated for various volume fractions of reinforcement. Method of successive elastic solution is employed to obtain history of stresses and creep deformations. It is found that stresses and displacements approach their steady state values after 40000 hours. The results presented in this paper can be used for selection of appropriate longitudinal distribution of reinforcement to achieve the desired stresses and displacements.