• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.352-356
• /
• 2013

Recently, the stationary discontinuous armature, Permanent Magnet Linear Synchronous Motor (PM-LSM), was suggested as a driving source for long-distance transportation system. However, as these motors arrange armatures discontinuously, an edge occurs thereby leading to a cogging force. This works as a factor that hinders the acceleration and deceleration that takes place when movers enter into and eject from armatures. Therefore, in this study, the installation of auxiliary teeth on the edge of the armature of PM-LSM is suggested in order to reduce the cogging force caused by the edge when the armature is placed in a discontinuous arrangement. Auxiliary teeth are optimally designed by a 2-D numerical analysis using the finite element method was performed to generate the optimum design of the auxiliary teeth. The validity of the study was confirmed through the comparison of the cogging force induced at the edge in respect to the design parameter using the basic model.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.624-631
• /
• 2022

Highway Rest Areas are envisioned to provide an accessible space for rest and parking for travelers, especially those driving a long distance. In addition, modern highway Rest Areas provide many amenities to highway users, including wifi service, picnic tables, litter barrels, running water, public telephones, and sometimes even free coffee. Various studies were conducted in the domain of Rest Area facility design and their operating costs in different states; however, limited studies were conducted on the maintenance costs of these facilities. Therefore, this study's main objective is to compute the annual maintenance cost of Rest Areas in the state of Nevada. This study also analyzes the main cost categories of the maintenance works. The raw cost data of Nevada Rest Area maintenance from 1990 to 2012 were collected from the Nevada Department of Transportation (NDOT). Results show that the maintenance cost fluctuated over the study period; the maintenance cost decreased from 1991 to 2004 and then increased until 2012. The primary cost categories of maintenance work are labor, equipment, and material costs. Among these, labor cost was the largest category with 56 percent of the total maintenance cost, followed by equipment cost and material cost. The findings of this study may help NDOT and other transportation agencies plan their budget for future Rest Area maintenance activities.

• Smart Structures and Systems
• /
• v.16 no.2
• /
• pp.243-262
• /
• 2015

Optimal sensor placement (OSP) is a critical issue in construction and implementation of a sophisticated structural health monitoring (SHM) system. The uncertainties in the identified structural parameters based on the measured data may dramatically reduce the reliability of the condition evaluation results. In this paper, the information entropy, which provides an uncertainty metric for the identified structural parameters, is adopted as the performance measure for a sensor configuration, and the OSP problem is formulated as the multi-objective optimization problem of extracting the Pareto optimal sensor configurations that simultaneously minimize the appropriately defined information entropy indices. The nondirective movement glowworm swarm optimization (NMGSO) algorithm (based on the basic glowworm swarm optimization (GSO) algorithm) is proposed for identifying the effective Pareto optimal sensor configurations. The one-dimensional binary coding system is introduced to code the glowworms instead of the real vector coding method. The Hamming distance is employed to describe the divergence of different glowworms. The luciferin level of the glowworm is defined as a function of the rank value (RV) and the crowding distance (CD), which are deduced by non-dominated sorting. In addition, nondirective movement is developed to relocate the glowworms. A numerical simulation of a long-span suspension bridge is performed to demonstrate the effectiveness of the NMGSO algorithm. The results indicate that the NMGSO algorithm is capable of capturing the Pareto optimal sensor configurations with high accuracy and efficiency.

• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.7-18
• /
• 2001

This study represents a first attempt in Korea to develop the simultaneous freight supply-demand model which considers the relationship between freight supply and demand. As the existing study was limited in one area, or the supply and the demand was separated and assumed not to affect each other, this study take it into consideration the fact that the demand affects supply and simultaneously vice versa. This approach allows us to diagnose a policy carried on and helps us to make a resonable alternative for the effectiveness of freight transportation system. To find a relationship between them, we use a method of econometrics. a structural equation theory and two stage least-squares(2SLS) estimation technique, to get rid of bias which involves two successive applications of OLS. Based on the domestic freight data, this study consider as explanatory variables a number of population(P), industry(IN), the amount of production of the mining and manufacturing industries(MMI), the rate of the effectiveness of freight capacity(LE) and the distance of an empty carriage operation(VC). This study describes well the simultaneous process of freight supply-demand system in that the increase of VC from the decrease of VC raises the cargo capacity and cargo capacity also augments VC. By the way. it is analyzed that the increment of VC due to the increase of the cargo capacity is larger than the reduction of VC owing to the increase of the quantify of goods. Therefore an alternative policy is needed in a short and long run point of view. That is to say, to promote the effectiveness of the freight transportation system, a short term supply control and a long run logistic infrastructure are urgent based on the restoration of market economy by successive deregulation. So we are able to conclude that gradual deregulation is more desirable to build effective freight market.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.953-958
• /
• 2015

Generally, Urban railway have special characteristics with short distance journey and minimum headway intercity transportation. These days, urban railway operators choose the driverless operation system without driver. On the contrary, Conventional & high speed railway utilize for long distance and high speed running. Because of special conditions of freight railway operation compared with urban railway, operation of conventional & high speed railway is showed very different characteristics. In this paper, We compares different operation scheme of urban railway and conventional & high speed railway and then present condition for train control system based on radio.

• Journal of Radiation Industry
• /
• v.17 no.1
• /
• pp.83-92
• /
• 2023

When assessing the risk of radioactive wastes transportation on land, computer codes such as RADTRAN and RISKIND are used as deterministic methods. Transportation risk assessment using the deterministic method requires a relatively short assessment time. On the other hand, transportation risk assessment using the probabilistic method requires a relatively long assessment time, but produces more reliable results. Therefore, a study is needed to evaluate the exposure dose using a deterministic method that can be evaluated relatively quickly, and to compare and analyze the exposure dose result using a probabilistic method. The purpose of this study is to evaluate the exposure dose during transportation of radioactive wastes using deterministic and probabilistic methods, and to compare and analyze them. For this purpose, the main exposure factors were selected and various exposure situations were set. The distance between the radioactive waste and the receptor, the size of the package, and the speed of vehicle were selected as the main exposure factors. The exposure situation was largely divided into when the radioactive wastes were stationary and when they were passing. And the dose (rate) model of the deterministic overland transportation risk assessment computer code was analyzed. Finally, the deterministic method of the RADTRAN computer code and the RISKIND computer code and the probabilistic method of the MCNP 6 computer code were used to evaluate the exposure dose in various exposure situations during transportation of radioactive wastes. Then we compared and analyzed them. As a result of the evaluation, the tendency of the exposure dose (rate) was similar when the radioactive wastes were stationary and passing. For the same situation, the evaluation results of the RADTRAN computer code were generally more conservative than the results of the RISKIND computer code and the MCNP 6 computer code. The evaluation results of the RISKIND computer code and the MCNP 6 computer code were relatively similar. The results of this study are expected to be used as basic data for establishing the radioactive wastes transportation risk assessment system in Korea in the future.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.47-53
• /
• 2017

There is a difficulty in preventing drunken driving by enforcing alcohol control on the sea due to the environment of Marine transportation rather than roads. In the previous study, we proposed the algorithm, that was developed to identify the voices changed according to be drunk. Using the developed algorithm, it became possible to know the possibility of drinking by long distance ship operators and crew members. In that method drinking can be measured in real time, no matter how far the distance is, if the interception is through a voice that can be transmitted over a distance, rather than a short distance. When communicating voice using the VTS wireless devices, clipping occurs when that environment is uneven, and the rate of judgment of the possibility of drinking may be lowered. Therefore, in this paper, we proposed an enhanced method to compensate the signal in order to reduce the error rate of the possibility of drinking due to distortion of the speech signal.

• Journal of Coastal Disaster Prevention
• /
• v.5 no.4
• /
• pp.173-182
• /
• 2018

As the research about increasing the efficiency of dredging soil transport, the technology, which reduce the friction between pipe wall and fluid in the pipe and disturbed generating pipe blockage, has been developed. So for the purpose of applying this technology to real construction site, main test has been tried at the real scale test in field. As a test result, this paper will show 30% flow efficiency increasing by permitted electro magnetic force to the pipe. And test result was evaluated as a ultra sonic velocity profiler. To propose the design technique and the execution manual of the high efficiency dredging material transport technic, this research have confirmed flow status changing depending on a soil material kind under electro-magnetic field and analyze the effect of electro-magnetic field which affects to each dredged soil material transportation. For achieving this research, EMF(Electro-Magnetic Field) generator is installed on the dredger(20,000HP) and through monitored flow status, dredging soil flow rate and sampled material specification is confirmed. Also dredger operating condition is measured and dredger power for soil transportation, hydraulic gradient and flow rate are compared, as transportation efficiency is calculated by this parameter, it is possible to check transportation efficiency improvement depending on each dredged soil material under electro-magnetic field. To verify the technique of dredged soil transfer using electromagnetic field, which is the core technique of the high efficiency dredged soil transfer, and the technique of expert system for pipeline transfer and the flow state. This could lead to a verification of transfer efficiency according to the characteristics of the dredged soil (sand, clay, silt) and the transfer distance (5km, 10km, 15km), which is planned to be used for a technology development of pump power reduction and long-distance transfer applying the high efficiency dredged soil transfer technology.

• Spatial Information Research
• /
• v.20 no.3
• /
• pp.83-93
• /
• 2012

Recent environmental concerns have made interest in environment-friendly transportation means such as walking, biking, and public transportation. However, since it is difficult to move long distance by walking or biking, their scope of application is rather limited. On the other hand, public transportation can solve traffic congestion, a recent social issue, though its usability may depend on its time schedule. Currently available information services on public transportation in the Web do not reflect well such traits of the public transportation; thus, in some cases, they may provide wrong information to end users. To solve such problems and provide information based on timetable of public transportations, this paper proposes a STP(Space Time Point) data model. Unlike existing space-time data models, this model recognizes the bottommost element of an object as a point and structures these points in hierarchical way to define an object. In particular, It can make it possible to implement a variety of dynamic spatial objects changing object information according to time. An objective of this study is to design a STP model for bus and subway based on timetables of public transportation in Daejeon area and builds a system to provide path navigation. With the designed navigation function, a path from the Daejeon National Cemetery to Hannam University was searched by time slot. The result showed that the system provided different paths by time, as the system guided different paths when bus operation was limited in midnight. As existing data model could not provide such results, it is confirmed that the system can provide path navigation based on real-time traffic information. It is expected that based on such functionality, it is possible to provide additional functionalities by applying diverse data models such as real-time transport information or traffic history information.

• Journal of Korean Society for Quality Management
• /
• v.33 no.3
• /
• pp.71-90
• /
• 2005

New high-speed rail service, the Korea Train Express(KTX), has been beginning service in Korea. We measured the service quality of the Korea Train Express and comparatively analyzed the service quality of domestic flight and express buses which are means of long distance transportation. Furthermore, by using the Kano model, the perception level of the service of customers is not only segmented in groups but also switching barriers are derived. As a result, the customers by group have a difference in the level of their perception. While in both high-speed bullet train service and flights dimensions significantly affect the customer satisfaction and retention excluding a responsiveness dimension, in the Train Express four dimensions(Reliability, Responsiveness, Assurance, Tangibles) with the exception of Empathy which significantly affect the customer satisfaction and retention.