• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1099-1104
• /
• 2007

The visual implementation of 3-dimensional national environment is focused by the requirement and importance in the fields such as, national development plan, telecommunication facility deployment plan, railway construction, construction engineering, spatial city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies national geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. There it is needed to apply laser measurement technique in the spatial target object to obtain accuracy. Currently, the LiDAR data which combines the laser measurement skill and GPS has been introduced to obtain high resolution accuracy in the altitude measurement. In this paper, we first investigate the LiDAR based researches in advanced foreign countries, then we propose data a generation scheme and an algorithm for the optimal manage and synthesis of railway facility system in our 3-D spatial terrain information. For this object, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional railway model with long distance for 3D tract model generation.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.251-259
• /
• 2014

The transition zone between an earthwork and a bridge effect to the vehicle's running stability because support stiffness of the roadbed is suddenly changed. The design criteria for the transition structure on ballast track were not particular in the past. However with the introduction of concrete track is introduced, it requires there is a higher performance level required because of maintenance and running stability. In this present paper, a transition structure reinforced with geosynthetics is suggested to improve the performance of existing bridge-earthwork transition structures. The suggested transition structure, in which there is reinforcing of the approach block using high-tension geosynthetics, has a structure similar to that of earth reinforced abutments. The utilized backfill materials are cement treated soil and gravel. These materials are used to reduce water intrusion into the approach block and to increase the recycling of surplus earth materials. An experiment was performed under the same conditions in order to allow a comparison of this new structure with the existing transition structure. Evaluation items are elastic displacement, cumulative settlement, and earth pressure. As for the results of the real-scale accelerated testing, the suggested transition structure has excellent performance for the reduction of earth pressure and settlement. Above all, it has high resistance the variation of the water content.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.30-36
• /
• 2008

The Spatial Image contents of Geomorphology 3-D environment is focused by the requirement and importance in the fields such as, national land development plan, telecommunication facility management, railway construction, general construction engineering, Ubiquitous city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. There it is needed to apply laser measurement technique in the spatial target object to obtain accuracy. Currently, the LiDAR data which combines the laser measurement skill and GPS has been introduced to obtain high resolution accuracy in the altitude measurement. In this paper, we tested of the railway facilities using laser surveying system, then we propose data a generation of spatial images for the optimal manage and synthesis of railway facility system in our 3-D spatial terrain information. For this object, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional railway model with long distance for 3D tract model generation. As the results, We confirmed the solutions of varieties application for railway facilities management using 3-D spatial image contents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.645-652
• /
• 2018

Recently, as South Korea has joined the OSJD, the rules of the OSJD need to be applied to South Korea. Therefore, the railways are connected to the continent railway in terms of software, but the railway systems in neighboring countries have been developed and operated for a long time, and are quite different with some restrictions in terms of hardware. Therefore, this study analyzed the current railway systems of neighboring countries' based on the TSI used in Europe for technical interoperability. A real operation with the operation models within the specific route was assumed and vector functions for the Infrastructure vector & Rolling stock vector were produced. The IOP value was calculated by working out the interfacing matrix value between the infrastructure vector and rolling stock vector. As a result of calculating the IOP in a specific route, which is from Busan South Korea to Vladivostok with the diesel locomotive hauling freight cars, the value was only 22%, which is fairly low in terms of the interoperability. In other words, there are 77.8% restricting items preventing their interoperability. Such restricted causes should be improved to increase the technical interoperability in the long term. Moreover, and when railway systems are constructed and manufactured, it is important to keep IOP 100% to increase the operating efficiency in continental railways.

• Korean Business Review
• /
• v.21 no.2
• /
• pp.137-170
• /
• 2008

This study is presenting the logistics strategy in the international logistics markets which makes competition and corporation among north-east Asian countries to establishing the multi-pass Eurasian railroads. The countries located in north-east area of Eurasia like China, Japan, Russia and Korea are paying higher costs and disutility to the transportations and communications due to repeated conflicts and confrontations causes from the politic problems. They are being used surface transportation for most of all logistics between Europe and Asia except special merchandises because of characteristic of cargo to be air, the Silk Road remains vestige only which was main logistic passage to this area since BC. So far the Trans-Siberian Railway is being used by Russia mostly as north of Eurasian transport because of difficulties of service. The Trans-China Railway built in 1992 is not accomplishing as a international logistic passages. It is expected to take a long lead time because of characteristic of resource development and poor logistic infrastructure to the countries like Uzbekistan, double landlocked country, Mongolia and Azerbaijan, the countries do not be adjacent to the sea, even they have great economic jump-up plans through the development of their own resources. The Shanghai Cooperation Organization(SCO) start to sail officially in 2001 is constructed with China, Russia, Tadzhikistan, Kyrgyzstan, Kazakhstan and Uzbekistan as regular members of 6 countries and Mongolia, India, Pakistan, Afghanistan and Iran as observers 5 countries. It is started as a military alliance to protect terror, but now, it is expended to cooperate with the traffic, transportation, trade and share of energies. The Russia is doing their best to activate TSR as a government target to developnorth area equivalently, and economic develop of far-east Siberia. And also it is agreed provisionally to improve and repair of rail road between Nahjin and Hassan to connect TSR and TKR( Trans-Korea Railroad) by Russia, North Korea and South Korea with Russian's aggressive efforts. The development plan of this area is over lapped with GTI(Greater Tumen Initiative) promoted by UNDP, and is a cooperated project by 5 countries of South Korea, Mongolia, China, Russia and North Korea, subject to review the appropriation of energy, tour, environment, rail road connection between Mongolia and China and establishing a ferry route to north-east Asia. It is Japanese situation to pay attention to Russia and China even they have been supplying large-scope of infrastructure in Mongol area without any charges, target to get East Asia Main Rail Road to connect Mongolia and Zalubino of Russia. In case of the program for the Denuclearization of North Korea is not creeping, it will be accelerated to connect the TKR and TSR, TKR and TCR by somehow attending United States, including developing program promoted by UN ESCAP. As the result, Korean peninsular will continue the central role of competition and cooperation as in the past, now and future of north-east Asia, as of geographical-economics and geographical-politics whether it is requested or not wanted by neighbor countries.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.10
• /
• pp.35-43
• /
• 2011

The area to be studied is the place where the main line rail way will be constructed in accordance with the scheduled construction project of Yeongju dam, and is a fold and mylonite zone over several km that is formed by ductile-shearing effect. The ductile shear zone, which has been transformed by faulting for long geological time, shows a complicated geological structure. Due to the recrystallization of mineral caused by transformation in deep underground (>8km), a mylonite zone with lamellar structure has properties distinguished from other fault zones formed by transformation near earth surface <2km). To see the properties of mylonite, this study analyzed the transformation rate of sample rocks and the shape of constriction structure accompanied with transformation. While the transformation of fault zone shows a round oblate, the mylonite zone shows a prolate form. Transformation rate in fault zone was measured to be less than 1.2 compared to the state before transformation while the measured rate in mylonite zone was 2.5 at most. Setting the surface of discontinuity as the base, the unconfined compressive strength of slickenside can be categorized in sedimentary rocks, and a change of strength was observed after water soaking over certain time. Taking into account that the weathering resistance of the rock based on mineral and chemical organization is relatively higher, its engineering properties seems to result from the shattered crack structure by crushing effect. When undertaking tunnel construction in mylonite zone, there should be a special care for the expansion of shattered cracks or the fall of strength by influx of ground water.

• The Journal of Engineering Geology
• /
• v.19 no.1
• /
• pp.63-70
• /
• 2009

The optical fiber cable acting as a sensor was embedded in the underground research tunnel and portal area in order to monitor their stability and the spatial temperature variation. This system includes two types of sensing function to monitor the distributed strain and temperature along the line, where sensor cable is installed, not a point sensing. According to the results of one year monitoring around the KURT, there is no significant displacement or movement at the tunnel wall and portal slope. However, it would be able to aware of some phenomena as an advance notice at the tunnel wall which indicates the fracturing in rockmass and shotcrete fragmentation before rock falls accidently as well as movement of earth slope. The measurement resolution for rock mass displacement is 1 mm per 1 m and it covers 30 km length with every 1m interval in minimum. In temperature, the cable measures the range of $-160{\sim}600^{\circ}C$ with $0.01^{\circ}C$ resolution according to the cable types. This means that it would be applicable to monitoring system for the safe operation of various kinds of facilities having static and/or dynamic characteristics, such as chemical plant, pipeline, rail, huge building, long and slim structures, bridge, subway and marine vessel. etc.

• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.236-243
• /
• 2010

We examine the change in healthcare utilization pattern of cancer patients since the launch of KTX in 2004. It is found that during the year of 2004 and 2005 the rapid increase in the ratio of cancer patients' healthcare utilizations for the tertiary hospitals in Seoul to the total healthcare utilizations has accompanied the rapid decrease in the corresponding ratio for the tertiary hospitals in the local metropolitan areas under the influence of KTX while the corresponding ratio for the tertiary hospitals in the local cities with little influence of KTX on them has exhibited mild change. Since healthcare consumers' choice of hospitals can be characterized by "foot voting" action in the healthcare service market in Korea, such a phenomenon may have strong implication that the introduction of KTX may have affected substantially the inter-area healthcare utilization pattern by cancer patients by reducing various sorts of long-distance travel costs. Therefore, considering the potential contribution of KTX to the increase of cancer patients' accessibility to hospitals with higher qualities, support policies such as fare discount for low-income cancer patients in local areas may need to be taken into consideration where the well-designed fare discount program for low-income cancer patients may increase utilizations of KTX by lowincome cancer patients without incurring additional costs to running of KTX.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.105-110
• /
• 2009

The On Line Electric Vehicles(OLEV) that can pick up inductive power from underground coils on driving with high efficiency have been developed this year, and is now proposed in this paper. The IPS(Inductive Power Supply) system consists of power supply inverters, power supply rails, pick up modules, and a regulator. There are 3 generations of IPS have been developed so far, and the $4^{th}$ generation IPS is being developed. The $1^{st}$ generation has been demonstrated this Feb. 27, which is equipped with mechanically auto tracking pick-up module with 1cm air gap, and showed 80% power efficiency. The $2^{nd}$ generation IPS applied to an 120kW (average)/240kW(peak) motor powered electric bus has 17cm air gap with 72% power efficiency. For the $2^{nd}$ generation IPS, the Power supply inverter has 440V, 3phase input and 200A @ 20kHz output. The test power supply rail of 240m long is segmented by 60m each, where newly developed core structure and power cable are constructed under the road covered with asphalt of 5cm thickness. The pick-up modules which consist of core, winding wire, and rectifiers are fixed to the bottom of the bus which can carry more than 40 passengers and can pick up max. 60kW. To remove parasitic component and to transfer maximum power between them resonant circuit topology is applied to the primary and secondary sides. The EMF level is below 62.5mG at 1.75m from the center of the road to meet the regulation. Several effective ways of reducing EMF levels have been developed. In addition, effective ways to solve problems related high frequency power cables buried in ground and it's proof from soil have been studied also. This development shows that the IPS system is capable of supplying enough power to the pick-up of OLEV and can reduce battery size, weight and cost, which means the IPS with OLEV is one of the best candidate for EV.

• Journal of Distribution Science
• /
• v.12 no.2
• /
• pp.27-37
• /
• 2014

Purpose - As economic activities between different countries have rapidly spread in a world of free trade, it is inevitable that a large volume of cargo will be carried between countries. It is natural, then, that CO2 emissions and other environmental pollutions have followed, which exposes people and society to serious environmental problems and social costs, and so on. Therefore, the need to understand logistics is not only a matter of transportation but also an environmentally oriented matter. The purpose of this study is to look at some lessons and implications from the European case in terms of green logistics matters. Research design, data, and methodology - In order to look into this matter, first, it has to be established that some cargo transport volumes using different transportation modes have clearly declined because of previous economic recessions. Some transport policies produced by the European Union (EU) are based in a long history of struggling to cope with transport matters in European countries. In its recent transport policies, the EU has provided greener transportation alternatives, realizing that pollution matters affect the European transport market. This study tries to determine what policies the EU has implemented to deal with green logistics matters. This study concentrates in particular on the Marco Polo program in the EU. Results - This study found that the EU seems to consider these kinds of matters, that is, transport and the environment in the context of green logistics. The EU launched some policy instruments to solve this matter relatively earlier than other countries and reviewed them as necessary. In order to make these policy tools work, the EU provided PACT for combined transport, and then the Marco Polo I and II European transport white paper packages. These European policies deal with green logistics matters in two ways. First, some restrictions have been imposed, especially taxation, and so on. Transport subsidies are also powerful means of handling green logistics matters in Europe. Along with these two means of dealing with transport and the environment, the EU eventually targeted integration of different transport modes. Instead of employing only a single transport instrument mode to deliver the cargo to be carried, such as trucking, rail, ocean-going carrier, flight, or inland waterway transport, the EU has proposed that combining transport modes is the best alternative for transport and the environment. That is, the EU is pursuing the adoption of multimodalism as an answer to the green logistics challenge as it provides a more cost efficient and more productive means of transport. Conclusions - In conclusion, multimodal transport should be considered when applying green logistics, as it can provide an alternative way to achieve transport and environmental solutions together at the present time. Two methods can be used to encourage multimodal transport: restrictions and subsidies. These are the lessons and implications from European green logistics policies.