• 유변학
• /
• 제5권2호
• /
• pp.161-169
• /
• 1993

Glucomannan(G.M.)은 Amorphophallus Konjac C. Koch의 tuber로부터 분리되었고. 이 G.M.은 다시 침전제로 메탄올을 사용하여 4단계로 분별되었다.(F.1, F.2, F.3, F.4,). 각분 별물에 비하여 직선으로부터 벗어남을 보였다. Low shear viscometer로 G.M. 용액의 viscosity를 측정하였고 농도와 zero shear specific viscosity의 logarithm을 도시한 결과 inflection point를 나타내었다. 이것은 G.M. 분자들의 coil overlap의 시작에서 기인한 것이 고 묽은 용액에서 진한 용액으로의 전이행동은 임계농도. C＊=4/[η]에서 일어났고 이때의 zero shear specific viscosity는 10을 나타내었다. 또한 specific viscosity는 묽은 용액에대해 서는 C14로써 변화하였고 진한 요액에서는 C3.0으로변화하였다. G.M.의 고체상태에 대한 유 전성($\varepsilon$＇,$\varepsilon$＂)과 점탄성(C＇,C＂)계수들을 액체질소 온도에서부터 15$0^{\circ}C$ 온도범위에 걸쳐 4단계로 film을 건조시키면서 10Hz에서 측정하였다. G.M. film의 유전성과 점탄성의 허수부 분은 ($\varepsilon$＂, C＂), -10$0^{\circ}C$에서 peak를 나타내었고 이 peak는 hydroxy methyl 기들의 회전 운동에서 생겨난 것이다. 건조시키지 않은 상태의 G.M. film의 유전성과 점탄성의 허수부분 의 값들은 -5$0^{\circ}C$에서 물 분자의 운동에 의하여 생긴 peak를 보였다.

• 한국전자통신학회논문지
• /
• 제7권3호
• /
• pp.545-551
• /
• 2012

본 논문에서는 류수 계산의 복잡성과 소인수분해의 어려움을 덫으로 하는 IQC(Imaginary Quadratic Cryptosystem)에 기반을 둔 새로운 암호계를 제안한 다음, 그의 암호화와 복호화 시간을 줄이는 효율적인 알고리즘을 제시하기로 한다. 또한 제안하는 암호계의 안전성을 쉽게 알 수 있도록, 그 암호계의 가장 간단한 예를 들어 그 암호계에 사용되는 공개키 또는 비밀키의 복잡도와 안전성을 분석하고 제안된 암호계의 작동과정을 소개하기로 한다.

• Journal of the Korean Data and Information Science Society
• /
• 제21권4호
• /
• pp.765-775
• /
• 2010

For the accelerated failure time (AFT) model a lot of effort has been devoted to develop effective estimation methods. AFT model assumes a linear relationship between the logarithm of event time and covariates. In this paper we propose a semiparametric support vector machine to consider situations where the functional form of the effect of one or more covariates is unknown. The proposed estimating equation can be computed by a quadratic programming and a linear equation. We study the effect of several covariates on a censored response variable with an unknown probability distribution. We also provide a generalized approximate cross-validation method for choosing the hyper-parameters which affect the performance of the proposed approach. The proposed method is evaluated through simulations using the artificial example.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1312-1319
• /
• 2006

This thesis studied the scale effects on bearing capacity and settlement characteristics by using FEM. The conclusions of the study are as follows. 1) For sandy soil, the bearing capacity ratio increased in the form of logarithm as the foundation width increased. Hence application of static mechanic theory results in overestimation of the bearing capacity when the bearing capacity should be derived from plate loading test results. 2) In clayey soil, the characteristics of the bearing capacity associated with foundation width met Terzaghi's bearing capacity theory. 3) In sandy soil, the settlement ratio increased non-linearly as foundation width increased. However, in clayey soil, the settlement ratio increased linearly. 4) In ordinary soil, the foundation width - settlement ratio turned out to be close to that of sandy soil.

• 아태비즈니스연구
• /
• 제3권1호
• /
• pp.29-38
• /
• 2012

This study aims at evaluating the impact of network formation variables and found to have positive impact on the economic performance and growth of the enterprises. The calucation of the weighted scores of networking statements brought some affirmative results to influence the performance of the enterprises. Through multiple regression and logistic regression models it is identified that network formation variables like service receiving status, consultation of the family, other business dummy and attendance in fair have some significant positive impact both on the growth and performance of the enterprises. In addition to above variables, from the set of enterprise characteristics natural logarithm of the market value of total assets and from the entrepreneurs' characteristics set of variables, schooling year and squared value of the experience have been found to have significant positive impact. Finally, it is concluded in the study that to enhance the performance and growth of the enterprises, government and policy rlated organizations need to consider important variables that have positive impact in supplying the entrepreneurial resources especially, developing the net-working relationship.

• Journal of applied mathematics & informatics
• /
• 제26권5_6호
• /
• pp.1139-1147
• /
• 2008

A. Saxena et al. first proposed a two-flow blind identification protocol in 2005. But it has a weakness of the active-intruder attack and uses the pairing operation that causes slow implementation in smart cards. In this paper, we give a method of the active-intruder attack on their identification scheme and propose a new zero- knowledge blind identification protocol for Smart cards. Our protocol consists of only two message flows and does not rely on any underlying signature or encryption scheme. The prover using computationally limited devices such as smart cards has no need of computing the bilinear pairings. It needs only for the verifier. Our protocol is secure assuming the hardness of the Discrete-Logarithm Problem in bilinear groups.

• 대한화학회지
• /
• 제7권4호
• /
• pp.288-292
• /
• 1963

The rates of reaction of various Korean anthracites with carbon dioxide were measured at temperatures ranging from $850^{\circ}C$ to $1100^{\circ}C$ with coal -6, +8 sieve size and the residence time of reactant gas in the fixed coal bed 14.0 to 15.0 seconds. The primary variables studied were the coal sources and temperature. The reactivity was considerably varies with the coal sources and the general trends show that the reactivity sharply increases with increasing reaction temperature except the Yongwol coal where the increase is not so sharp, which is considered to be due to high reactivity and high-pore structure of the coal. It was also found that a straight line was produced when a logarithm of the rate constant is plotted against the reciprocal of the absolute temperature up to 1000^${\circ}C$, but above that temperature it deviates from linearity. The information obtained will be of value in the design of the coal gasifier using Korean anthracites.

• Communications for Statistical Applications and Methods
• /
• 제16권4호
• /
• pp.713-722
• /
• 2009

The estimation of odds ratio and corresponding confidence intervals for case-control data have been done by traditional generalized linear models which assumed that the logarithm of odds ratio is linearly related to risk factors. We adapt a lower-dimensional approximation of Gu and Kim (2002) to provide a faster computation in nonparametric method for the estimation of odds ratio by allowing flexibility of the estimating function and its Bayesian confidence interval under the Bayes model for the lower-dimensional approximations. Simulation studies showed that taking larger samples with the lower-dimensional approximations help to improve the smoothing spline estimates of odds ratio in this settings. The proposed method can be used to analyze case-control data in medical studies.

• Communications for Statistical Applications and Methods
• /
• 제16권5호
• /
• pp.841-849
• /
• 2009

Let {$X_n$, n ${\ge}$ 1} be a negatively associated sequence of identically distributed random variables with mean zeros and positive finite variances. Set $S_n$ = ${\Sigma}^n_{i=1}\;X_i$. Suppose that 0 < ${\sigma}^2=EX^2_1+2{\Sigma}^{\infty}_{i=2}\;Cov(X_1,\;X_i)$ < ${\infty}$. We prove that, if $EX^2_1(log^+{\mid}X_1{\mid})^{\delta}$ < ${\infty}$ for any 0< ${\delta}{\le}1$, then $\lim_{{\epsilon}\downarrow0}{\epsilon}^{2{\delta}}\sum_{{n=2}}^{\infty}\frac{(logn)^{\delta-1}}{n^2}ES^2_nI({\mid}S_n{\mid}\geq{\epsilon}{\sigma}\sqrt{nlogn}=\frac{E{\mid}N{\mid}^{2\delta+2}}{\delta}$, where N is the standard normal random variable. We also prove that if $S_n$ is replaced by $M_n=max_{1{\le}k{\le}n}{\mid}S_k{\mid}$ then the precise rate still holds. Some results in Fu and Zhang (2007) are improved to the complete moment case.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.7-12
• /
• 2005

The objective of this study is to estimate the mechanical behavior in bending and the anatomical changes of wood under several deflection rates. Sample specimens of water-saturated Japanese cedar (Cryptomeria japonica) were stressed to rupture under several deflection rates. Mechanical properties of wood such as modulus of elasticity, modulus of rupture and stress at proportional limit, and anatomical changes affected by deflection rates were estimated. Microscopic observations on compression side of the test specimens when the specimen was loaded to rupture were carried out by the SEM (scanning electron microscopy). The results are summarized as follows: 1. The mechanical properties of wood were affected by variations of the deflection rates. The modulus of elasticity (MOE), modulus of rupture (MOR) and stress at proportional limit were in proportion to the logarithm of deflection rates. 2. The deflection of wood at rupture in bending increased as deflection rates decreased. 3. The variations of the microscopic deformations of sample specimens were closely related to the deflection of wood at rupture. In case of largely deflected wood by maximum bending load, severe and abundant microscopic deformations were observed.