• 한국정밀공학회지
• /
• 제24권1호
• /
• pp.93-100
• /
• 2007

In this study, an investigation was made on bristles for the prosthetic and periodontally involved patients based on the previous studies. The purpose of this study was to investigate the ideal location and dimensions of bristles for the patients who were installed with fixed prostheses and severely involved periodontitis. 3D scanner was used to develop 3D visual models of bristles and teeth. These models were developed to be used for designing the ideal bristles for the prosthetic and periodontally involved patients. For the ideal design of bristle, interproximal area of dental arch and bristle must get into maximum and standard teeth may have to be chosen from many gypsum molds. During the design process the factors should be considered that influence the removal of plaque by bristle.

• 한국주거학회논문집
• /
• 제12권4호
• /
• pp.227-230
• /
• 2001

The Sri Autobindo Learning Center(SALC) is sponsoring the development of a passive solar village in Creston, Colorado, Situated near the Sangre de Cristo mountains, Savitri Village will be one of several religious communities in the area. This village will incorporate 12 permanent residences and teaching and guest facilities for fifty to one hundred people. The purpose of this study is to evaluate the passive solar elements and performance of guest house at the Sri Autobindo Learning Center(SALC). To do this evaluation, the following tasks needed to be addressed. 1. the guest house design 2. the location of weather data 3. The determination of the building heating load As part of the evaluation process, guest house design will be modified and the building load and solar saving recalculated. This process will be completed until the building performance is deemed satisfactory. The conclusion is as follows; The high solar savings fraction predicted by SUNCODE should taken as an indication that further design changes would probably not be cost effective. But adding removal overhangs or other low costs measures to increase comfort in the summer appear to be appropriate.

• 대한의용생체공학회:의공학회지
• /
• 제27권4호
• /
• pp.180-188
• /
• 2006

Bristles for the prosthetic and periodontally involved patients are investigated based on previous studies. Specifically, the ideal location and dimensions of bristles for the patients who were installed with fixed prostheses and severely involved periodontitis were investigated. 3D (Three-Dimensional) scanner was used to develop 3D visual models of bristles and teeth. These models were used for designing the ideal bristles. In the design, the interproximal area of dental arch and bristle must be maximized and the standard teeth may have to be chosen from many gypsum molds. During the design process the factors that influence plaque removal by the bristle were considered.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.186-189
• /
• 2001

The main method in micro-etching process, used in manufacturing semiconductors, electronic components, circuits, is Photo Masking method that exposes and develops on the photo-sensitivity solutions or films. This method enables one to process highly precisely, $\pm$0.03 mm in end line location area. But this has limits in a high speed / wide width process, difficulties in endless masking, and the problem of high price. We have developed the direct masking method to make use of Gravure printing, widely used in grocery packing sheet printing. We made cylinder tools to influence the masking quality by laser stream process. We have confirmed that the end line location accuracy in the line width of the product is improved from 0.12 mm to $\pm$0.07 mm level, after etching process.

• 소음진동
• /
• 제10권2호
• /
• pp.240-246
• /
• 2000

One of the widely accepted methods for evaluating the interior sound quality of automobiles is Articulation Index(AI). The AI actually measures the articulation level of the sound in the vehicle cabin as passengers talk to one another. In this study, the effect of two different absorption materials inside the cabin on AI has been investigated by ray-tracing method : one is firewall, the other is celling. It turns out that the back seat location is found to be strongly dependent on the type of absorption materials treated at the celling, since the sound absorbing area is different due to the location and the firewall is situated in the "Reverberation Radius". The proposed methdo could be used to improve the sound quality of automobiles at the design stge.sign stge.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2002년도 추계학술발표대회
• /
• pp.321-326
• /
• 2002

To design mechanical ventilation for bathroom of apartment houses where air supply and exhaust are taken Into consideration, mock-ups of ventilation systems, widely used in bathroom of apartment houses with an area of 100$m^2$, were made and installed in a laboratory, These ventilation mock-ups were available for control of air supply and exhaust, and the size of supply openings were 40cm$\times$1cm, 40cm$\times$3cm, 40cm$\times$5cm. They were installed at five positions, spaced 40cm at a height of 25cm from the floor. and the position of exhaust fans were four corners and center Exhaust fan established each one on corner of the ceiling and one in center. As result that measure ventilation effect by each condition, size of hole that supply air is big, and ventilation effect took effect to be good establishment location is low, Also, distance of exhaust fan is far with hole that supply air, ventilation effect took effect by superior thing.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.188-195
• /
• 2022

Although issuing change orders is a common practice in the construction phase of any project, non-structural utility subcontractors are struggling and seek to find a way to reduce change orders. Therefore, this paper presents the analysis results on change orders to cultivate possible suggestions and solutions on how to reduce or minimize change orders in mechanical, electrical, and plumbing (MEP) works. Change orders in non-structural utility works are analyzed based on six categories such as rerouting and change of location, changes in weight, rejected design by Office of Statewide Health Planning and Development, District Structural Engineer, or the Structural Engineer of Record, unforeseen conditions, changed equipment, and owner-initiated change. The analysis findings showed that rerouting and changing location is the most significant cause, followed by unforeseen conditions. The results not only contribute to the existing body of knowledge on change order research area, but also help MEP contractors reduce the time and cost of change orders.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1001-1004
• /
• 1998

In this paper, we present a gridless router for MCMs. Instead of the commonly employed grid a set of comer stitched tiles are used as a routing framework. The router routes variablewidth pins with wires of any width. It also a allows arbitrary location of terminals, wires, and vias. It performs faster than most grid-based MCM routers and produces the routing results which are comparable to their achievements.

• 한국조경학회지
• /
• 제31권1호
• /
• pp.23-33
• /
• 2003

The purpose of this study is to analyse six different factors of water space that influence interior landscape architecture of officers and commercial spaces. Six different factors of water space that influence interior landscape architecture are the height of the water space, the design form, the blending with the location environment, location, general satisfaction with the water space, and general satisfaction with whole space. The results of this study are as follows: 1. Water space of commercial space was bigger than office space. The satisfaction is the highest in 0∼0.6M(B2) of office space and 3.5M(C6) of commercial space. The cascade form in the office space and large water volume design in commercial areas, which supplies abundant sound and water volume, were the highest. 2. In the analysis of preferences, the design form and the general design of the office space influences satisfaction levels. The height of the water space, and a combination of other factors influence general satisfaction. Water space influences commercial areas in higher degrees. 3. The items were most desired or satisfactory for interior landscape architecture were a cascade, water fall, and small water fountain. 4. A place introduced with water space had higher satisfaction levels. Water space produces higher than general satisfaction and indicates water, space alone cannot make general interior space satisfactory, although it can make interior landscape architecture space satisfactory. 5. There is more general satisfaction in commercial space than in office space. 6. The design of water space influences overall satisfaction: a rest area of office space needs an impressive and aggressive approach, while the office space should harmonize with its surroundings, as a commercial space.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제1권3호
• /
• pp.219-228
• /
• 2012

무선 인터넷 서비스가 활성화 되면서 현재 많은 사용자들은 공간에 제약 없이 다양한 인터넷 서비스들을 사용할 수 있게 되었다. 그러나 기존의 모바일 노드의 이동성 보장을 위한 IETF의 MIP, PMIP 등과 같은 이동성 관리 기법들은 모바일 노드에 무거운 프로토콜 스택을 탑재하게 하거나 LMA, MAG 등과 같은 신규 구성 요소 추가 등의 문제점을 안고 있다. 이를 위해 본 논문에서는 PMIPv6에서의 위치관리기법과 Fast Handover 기법을 제안하였다. 위치관리기법은 노드의 이동패턴에 따라 페이징 영역을 동적으로 조정하도록 제안하였고, Fast Handover 기법은 MIH 기술을 적용하여 이 기종 네트워크간의 핸드오버 신호 처리 시간을 단축하였다. 이를 평가하기위해 노드가 이동하는 환경에서의 위치관리비용과 핸드오버 지연시간을 계산하였고, 제안기법이 PMIPv6보다 최소 29%, 최대 83% 더 효율적으로 평가되었다.