• Nuclear Engineering and Technology
• /
• v.35 no.3
• /
• pp.234-242
• /
• 2003

The full energy peak efficiency of a hyper pure germanium (HPGe) detector was calibrated in a wide energy range from 0.06 to 11 MeV. Both the experimental technique and the Monte Carlo method were used for the efficiency calibration. The measurement was performed using the standard radioisotopes in the low energy region of $60{\sim}1408$ keV, which was further extended up to 11 MeV by using the $^{14}N(n,r)\;and\;^{35}Cl(n,r)$ reactions. The GEANT Monte Carlo code was used for efficiency calculation. The calculated efficiency had the same dependency on the r-ray energy with the measurement, and the discrepancy between the calculation and the measurement was minimized by fine-tuning of the detector geometry. From the calculated result, the efficiency curve of the HPGe detector was reliably determined particularly in the high energy region above several MeV, where the number of measured efficiency points is relatively small despite the wide energy region. The calculated efficiency agreed with the measurement within about $7\%$. In addition to the efficiency calculation, the origin of the local minimum near 600 keV on the efficiency curve was analyzed as a general characteristics of a HPGe detector.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.4
• /
• pp.590-597
• /
• 1990

To represent shape characteristics of digital closed curve, many algorithms, mainly based on local properties, have been proposed. In this paper, we propose a new algorithm for detecting local curvature maxima which reflects context, i.e., structural or surrounding regional characteristics. The algorithm does not require the value of k as an input parameter which is the major problem in k-curvature method in digital curve, but calculates it at each point depening on the context. The algorithm has been applied to two dimensional image boundaries. The efficiency of the algorithm is addressed by comparing the result of existing contest dependent algorithm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.223-228
• /
• 2015

Korean climate becoming increasingly subtropical by climate warming makes local heavy rainfall frequently. To avoid damages from the local heavy rainfall, we need a forecasting service for a great number of clients. However, there is not the framework for the service based on wireless data broadcasting yet. In this paper, we design and implement a service framework for local heavy rainfall forecasting using wireless data broadcast. The developed service framework has scalability that can adopt various data scheduling and indexing schemes. We show the efficiency of the proposed framework to forecast local heavy rainfall through a simulation study.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.4
• /
• pp.33-40
• /
• 2015

This study is aimed at exploring the direction and characteristics of Japanese medical facility improvement in each area, a move to strengthen local medical services. Also, this study is intended to establish implications for Korea, which has similar social conditions as Japan's. Based on the findings, Japanese medical facility improvement has the following characteristics. First, as for medical service supply system, the linkage between facilities was being strengthened. The purpose is to share the functions and roles of limited medical facilities. It allows patients to receive complete medical services in one area. Second, local public health facilities were consolidated to boost their management efficiency and to improvement their original functions. Third, local medical facility roles were divided into different levels. The purpose is to treat patients more efficiently depending on their diseases. In other words, the cooperative medical system was strengthened by dividing the roles of medical facilities. It is aimed at treating each patient more systematically depending on their conditions in line with the treatment stage. The findings suggest the following for Korea. In order to supply and maintain stable medical services regionally in line with social changes, functional issues of medical facilities should be tackled consistently and systematically.

• Transactions of Materials Processing
• /
• v.27 no.2
• /
• pp.87-92
• /
• 2018

Auto industries have tried to employ lightweight alloys to improve the fuel efficiency of manufactured vehicles, as the environmental concern becomes an important issue. Even though the aluminum alloy is one of the most appropriate lightweight alloys for auto parts, the low formability of an aluminum alloy has been an obstacle to its application. In order to resolve the low formability problem, a recent study (Lee et al., 2017 [1]) showed that the infrared (IR) local heat treatment can improve the formability with a reduction of heating energy. However, the aforementioned study was limited to only a linear line heating. Since many of the available auto parts as applicable to vehicle manufacturing have a curved line shape, the heating experiments for a curved line should be studied. The possibility of building IR lamps having complex shapes is an advantage of the IR lamp, since it can control the heating shape. This work conducted the IR local heat treatment for the curved line. The experimental results show that the IR local heat treatment can improve the formability of the aluminum alloy for curved line. Additionally, it is shown that the IR local heat treatment also reduces the heating energy when it is compared with the furnace heating which heats a blank as a whole. A numerical simulation with a stress-based forming limit diagram also supports the experimental results.

• The Korean Journal of Archival Studies
• /
• no.26
• /
• pp.63-93
• /
• 2010

This document illustrates the culture of archives should be improved to get better in local autonomy. In 1994, the municipal elections were held to perform autonomous activities in Korea. It has been sixteen years, since the first municipal election had been held. The local autonomy can be accomplished well, based on the economic independence from the central government and growing awareness of locals. Not only that, if local records were well archived and suitably used, autonomy could be more active. However, since the independence from Japan in 1945, records of the self-government has not been archived well. Not only archives of local government have not been established, but also organization, budget and professional staff have not been arranged well. This brought about local records administration's inactive performance. As a result, numerous number of meaningful records are lost and people are difficult to make out the local administration policy. If the records of local government preserved well, administrative efficiency, responsibility, transparency can be realized in better way. When local officials' work experiences and achievements were on record and referred to a successor of officials properly, administrative efficiency would be highly promoted. In addition, with the well-preserved work records, people are able to see where the responsibility lies. A local autonomous entity might be able to obtain administrative transparency by showing administrative processes and results to locals to the public. In this manner, the premise to archive the records of local autonomous entity is to establish a department which can archive local records and the disposition of professional archivists. According to "the law on public archives management", the governor of a province should discuss with a minister of administration to set up plans for archives' establishment and management. In this way, local archives administration would work well, when not only the department of local records administration is established, but also the department of local archives places local records under their control at the same time. Moreover, based on active records movement, municipal officials and locals would realize the importance of local record and examine local records administration systems. Not only that, when local records are shown to public and utilized properly, the local autonomy would improve a lot.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1200-1210
• /
• 1990

Conventional efficiencies of the adiabatic compression process such as isentropic efficiency and polytropic efficiency can be explained as exergetic efficiencies replacing the reference atmospheric temperature with the temperature which can be determined in the process itself. So that, other efficies such as maximum isentropic efficiency can be defined by giving proper reference temperatures. By applying the same logical principles, exergetic and other rational efficiencies for the non-adiabatic compression process are also defined and discussed for their physical meanings and reasonable engineering applications.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.10
• /
• pp.908-916
• /
• 2000

In this paper, the characteristics of moisture ventilation in the lithium ion battery manufacturing dry room are studied numerically using standard $k-\varepsilon$ turbulence model. Both the steady-state and the unsteady behaviors of moisture ventilation are analyzed by considering local and uniform moisture generation. In order to evaluate the characteristics of moisture ventilation, three scales of ventilation efficiency and characteristic ventilation time are presented from the numerical results. It was shown that moisture distribution was dependent strongly on the flow field. The characteristics of moisture ventilation were improved by 20% and 40% in terms of the 1st scale of ventilation efficiency (SVE1) and the 2nd scale of ventilation efficiency (SVE2), respectively, through the modifications of design variables such as the addition of inlets, outlets and partition. A significant improvement in the characteristic ventilation time and the moisture exhaust efficiency was also made by these modifications.

• Journal of the Korean Society of Safety
• /
• v.23 no.2
• /
• pp.1-6
• /
• 2008

The present study investigates on improvement of inhalation efficiency of hood in ventilation system for elimination of industrial dust. The hood, one of local exhaust ventilation system, has an important function to inhale a pollution source such as harmful dust and industrial waste. In this study, in order to improve the inhalation efficiency of the industrial hood, a new device named "gas-guide-device" was attached to inside of hood. The thermal fluid commercial code "Phoenics ver 3.1" was used to analyze the flow velocity distribution at the hood inlet and around the hood after gas-guide-device was installed. And the flow velocity on each position inside and around the hood was actually measured using the hot wire type anemometer under the same condition as that of numerical analysis. Also, in order to identify the optimum shape of gas-guide-device, numerical analysis and experiments are performed under various conditions and their results are presented. The results of this study revealed that the hood attached with gas-guide-device was higher the inhalation efficiency than that for without one and can be possible to improve the capture velocity of the industrial dust. And the optimum shape of gas-guide-device was identified that the ratio of two sizes of gas-guide-device, X to Y, has 4 to 6 on the basis of the hood size in use and the width (b) of gas-guide-device.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.3
• /
• pp.212-223
• /
• 2007

18 Local exhaust ventilation systems in 10 melting companies located in an industrial complex were tested to know the status of maintenance. Test items were fan flowrates, fan static pressures, rotational speeds and differential pressures of bag filters. Only 22% of the tested fans has more than 80% flowrate efficiency. 44% of the fans has lower than 60% efficiency. The performance of the fans are not in a good status. For the fans with lower than 60% efficiency, the analysis shows that the lower flowrate might be caused by the degradation of fan performance. On the other hand, for the fan s with higher than 60% efficiency, the main cause of flowrate reduction might be too much pressure losses due to clogging of filter bags. The degradation of fans usually lead the reduction of hood capture efficiency, resulting in the increase of contaminant concentrations in workplace. To keep fans in good status, self inspections should be periodically conducted. This inspection should include the measurements of flowrate and pressures. The most important thing to be performed is the initial test of local exhaust ventilation system because the initial test data should be used to know the level of system degradation.