주물 공단 용해공정의 송풍기 및 백필터 관리 실태

The Status of Maintenance of Exhaust Fans and Bag filters in Melting Processes in a foundry industrial complex

  • Kim, Tae Hyeung (Department of Environmental Engineering, Changwon National University) ;
  • Ha, Hyun Chul (VENTECH Corp.) ;
  • Jeoung, Chun Hwa (Department of Health and Safety Engineering, Semyung University) ;
  • Seo, Jeoung Yoon (Department of Environmental Engineering, Changwon National University) ;
  • Piao, Cheng Xu (Department of Environmental Engineering, Changwon National University) ;
  • Yang, Jun Ho (Department of Environmental Engineering, Changwon National University) ;
  • Li, Xiaoyu (Department of Environmental Engineering, Changwon National University)
  • 투고 : 2007.07.25
  • 심사 : 2007.08.28
  • 발행 : 2007.09.30

초록

18 Local exhaust ventilation systems in 10 melting companies located in an industrial complex were tested to know the status of maintenance. Test items were fan flowrates, fan static pressures, rotational speeds and differential pressures of bag filters. Only 22% of the tested fans has more than 80% flowrate efficiency. 44% of the fans has lower than 60% efficiency. The performance of the fans are not in a good status. For the fans with lower than 60% efficiency, the analysis shows that the lower flowrate might be caused by the degradation of fan performance. On the other hand, for the fan s with higher than 60% efficiency, the main cause of flowrate reduction might be too much pressure losses due to clogging of filter bags. The degradation of fans usually lead the reduction of hood capture efficiency, resulting in the increase of contaminant concentrations in workplace. To keep fans in good status, self inspections should be periodically conducted. This inspection should include the measurements of flowrate and pressures. The most important thing to be performed is the initial test of local exhaust ventilation system because the initial test data should be used to know the level of system degradation.

키워드

과제정보

연구 과제 주관 기관 : 창원대학교

참고문헌

  1. 강락원, 오덕수. 신편 주조공학. 보성각; 2007.(13-17쪽, 213-265쪽.)
  2. 경남지역환경기술개발센터. 금속주조업 환경시설운용 Manual; 2005.(76-101쪽.)
  3. 김태형. 경남지역 대기오염물질(호흡성분진 및 악취)현황조사 및 배출저감대책 수립-진해 마천지방산업단지를 중심으로. 경남 지역환경기술개발센터; 2005
  4. 김태형, 하현철, 김종철. 산업환기 및 공조진단. 경남지역환경기술개발센터; 2005.(265-289쪽.)
  5. 박용선, 노영만, 김현욱, 한진구, 안연순. 강성규, 김정만. 주물사업장에서 발생하는 호흡성분진의 농도 및 석영함유량에 관한 연구. 한국산업위생학회지 2003;13(1):90-97
  6. 박종화, 이동호, 손두익. 주물공장 후처리공정 작업환경 개선에 관한 연구(1)-발생분진처리 system중심-. 대한설비공학회 2001하계학술발표회 논문집 2001; 919-923
  7. 박종화, 이동호, 손두익, 김종윤. 주물공장 후처리공정 작업환경 개선에 관한 연구(2)-PIV를 활용한 성능해석-. 대한설비공학회 2001동계학술발표회 논문집 2001; 542-547
  8. 박진수, 정재학, 이태진. 주물공장의 Furan 공정에서 발생하는 휘발성 유기 화합물 및 분진의 동시제거 시스템 개발 및 현장설치 연구. Korean Chem Eng Res 2006;44(2):136-148
  9. 박현설, 송창병, 임경수. 주물공장 작업환경 개선을 위한 국소배기시스템 개발. 한국대기환경학회 2005 추계학술대회논문집 2005;499-500
  10. 서정윤. 용해로 출탕시 발생되는 흄 제어를 위한 환기량 산정. 경남지역환경기술개발센터; 2004.(21-40쪽.)
  11. 이상권, 김신도, 김태형, 오세원, 이병규, 이승묵, 이제근, 전의찬, 정장표, 박기학. 대기오염제어. 동화기술; 2004.(269-280쪽.)
  12. 조현호, 홍미옥, 조석연. 제강 작업장내 삼차원 유동장 및 먼지농도의 수치 모사. 한국대기환경학회지 2006;22(1):35-41
  13. 피영규, 김현욱. 우리나라 철강주조업의 공정별 유해인자 노출현황. 한국산업위생학회지 2003;13(2):99-106
  14. 피영규, 노영만, 이광묵, 김형아, 김용우, 원정일, 김현욱. 주물사업장 주공정별 발생하는 분진의 석영함유량 및 크기분포 연구. 한국산업위생학회지 1997;7(2):196-208
  15. American Conference of Governmental Industrial Hygienists : Industrial Ventilation a Manual of Recommended Practice 25th Edition, 2004. p. 6:1-37, 9:1-49
  16. Burgess WA. Foundry Operations. In : Recognition of Health Hazards in Industry(A Review of Materials and Processes), 2th Edition, John Wiley & Sons, Canada, 1995. p.106-135
  17. EPA. Air Pollution Engineering Manual. EPA; 1992. p.116-130
  18. Howard Goodfellow. Advanced Design of Ventilation Systems for Contaminant Control. Elsevier; 1985. p. 359-378
  19. Ilpo Kulmala, Pasi Hynynen, Irma Welling, Arto Saamanen. Local Ventilation Solution for Large Warm Emission Sources. Ann Occup Hyg 2007;51(1):35-43
  20. John C. Mycock, John D. Mckenna, Louis Throdore. Air Pollution Control Engineering and Technology. Lewis Publishers; 1995. p.105-132
  21. Marcela G. Ribeiro, Walter R.P. Filho. Risk assessment of chemicals in foundries: The International Chemical Toolkit pilot-project. Journal of Hazardous Materials A136. 2006;432-437