• Management Science and Financial Engineering
• /
• v.7 no.2
• /
• pp.73-90
• /
• 2001

This paper presents the reliability models for redundant systems composed of repairable components whose failure time and repair time distributions are phase-type. It is shown that the distribution of time to system failure is also phase-type. The dependency between components are considered and integrated into the model by the used of the rate adjustment factor. The phase-type representation is constructed for the system through algebraic operations on the parameters of components\` failure time and repair time distributions and the corresponding rate adjustment factors. Types of system structures considered are parallel, k-out-of-N system with load sharing scheme and standby system with operation priority.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.09a
• /
• pp.113-118
• /
• 1995

본 연구는 폐쇄형 대기행렬망(CQN:Closed Network of Queue)으로 표시되는 FMS 시스템의 최적 성능을 산정하는 방법과 각 작업장의 작업 부하 (Workload)를 최적화하기 위한 방법에 관한 연구이다. FMS 생산 시스템의 성능 (Performance)을 기존의 생산률(Production Rate)외에 기대생산률 (Expected Production Rate), 평균 대기작업량(Mean Queueue Length), 및 기대 투자이용률(Expected Investment Utilization Rate)과 이들 각각의 분산 (Variance)들을 고려하였다. 이러한 성과측정 문제를 수리 모델링하고 이를 이용하여 각 작업장에서의 가공 장비의 그룹(Machine Group)별 최적 작업배 분(Workload) 조건을 보였다. 또한 위의 과정을 최근의 FMS 전용 Simulator인 FACTOR/AIM을 이용한 분석 결과와 비교하여 보였다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.3
• /
• pp.250-257
• /
• 1991

In the analysis of the electric machine by finite element method, the primary current has been selected as a driving source. But the voltage is constant and the primary current varies according to the load condition in the pracdtical system. Therefore, in this paper, magnetic flux distribution, primary current, input effective power, power factor, efficiency and propulsion force of S.L.I.M. were calculated by the finite element method cnsidering the voltage as a driving source. Because the driving characteristics could not be measured in the S.L.I.M., voltage-current curve, 3-phase current curve, and propulsion force were measured at the starting and they were compared with theoretical values.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.552-554
• /
• 2000

This paper presents algorithm to plan construction and expanding of substation considering contingency accidents by proposing utilization factor according to configuration of bank system. In this paper, at first, proper sphere of supply area in each district which could be standardized with respect to its supply capacity is established under assumption which was made long term load forecasting in district respectively. Secondly, goal of utilization ratio according to configuration of substation bank was set to keep reliability by remaining sound bank when it happen to one bank accidents Finally, optimal construction and expanding of substation considering economy and reliability simultaneously about substation to exceed these ratio could be anticipated.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1791-1792
• /
• 2006

이 논문에서는 저속 회전체의 불균일 질량측정을 위한 새로운 신호처리 방법을 제안하고 이를 이용한 자동차 타이어의 보정(balancing) 방법에 관해 설명한다. 타이어를 포함한 시스템의 동력학 모델을 기반으로 타이어의 불균일 질량에 의해 발생되는 진동과 이로 인해 로드셀에 작용하는 힘의 관계식을 유도하고, 센서의 측정계수(scale factor)를 포함한 매개변수를 실험 데이터로부터 계산한다. 또한, 기존 방법과 달리 불균일 질량의 크기와 위치를 정확하고 효율적으로 측정할 수 있는 방법을 소형 마이크로 프로세서를 이용하여 구현하고 실험을 통해 그 성능을 검증한다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.121-124
• /
• 2004

The purpose of this study is to define the optimized layer pattern of composite wind turbine blade by using a commercial FEM program and to perform the fatigue test of T-Bolt. FEM analysis is done by using a PATRAN and ABAQUS to get a information about stress distribution ,critical deformation shape and get a critical load factor in local buckling analysis. As a result of the linear and nonlinear structural analysis, layer pattern of blade was optimized. T-Bolt is a connecting part of wind turbine blade and rotor hub, therefore T-bolt is cirtical part of wind turbine blade. T-bolt fatigue test is conducted to get a information of life cycle of T-bolt. The test is done by using a hydraulic actuator system

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.4
• /
• pp.714-724
• /
• 2001

In this work, some inaccuracies and limitation of prior indentation theory, which is based on the deformation theory of plasticity and experimental observations, are first investigated. Then effects of major material properties on the configuration of indentation load-deflection curve are examined via incremental plasticity theory based finite element analyses. It is confirmed that subindenter deformation and stress-strain distribution from the deformation theory of plasticity are quite dissimilar to those from incremental theory of plasticity. We finally suggest the optimal data acquisition location, where the strain gradient is the least and the effect of friction is negligible. This data acquisition point increases the strain range by a factor of five.

• Journal of the Korean Society for Railway
• /
• v.9 no.4 s.35
• /
• pp.401-411
• /
• 2006

The major objective of this study is to investigate the dynamic behaviors of track due to the deterioration characteristics of ballast for servicing tracks by the field test. The durability of ballast plays an important role in the track behaviour. To estimate the deterioration characteristics of ballast, several tests have been carried out by several scholars. The deterioration characteristics of ballast is one of the most important factor in the dynamic behaviour of track and its life. In this paper abrasion/breakage characteristics of ballast is studied to predict the effect of physical ballast characteristics on ballast track. To reveal deterioration characteristics of ballast, the field test were carried out. The deterioration characteristics, studied in this paper, is applied to the dynamic behaviour of track in various conditions.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.177-184
• /
• 2000

In this work, some inaccuracies and limitation of prior indentation theory, which is based on the deformation theory of plasticity and experimental observations, are first investigated. Then effects of major material properties on the configuration of indentation load-deflection curve are examined via incremental plasticity theory based finite element analyses. It is confirmed that subindenter deformation and stress-strain distribution from the deformation theory of plasticity are quite dissimilar to those from incremental theory of plasticity. We finally suggest the optimal data acquisition location, where the strain gradient is the least and the effect of friction is negligible. This data acquisition point increases the strain range by a factor of five.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.536-537
• /
• 2010

If DC voltage adjustment can be controlled very easily, it is much more effective rather than AC in transmission efficiency. The main reason why DC is more effective than AC, DC has the same role as the 70[%] of AC whenever the same power send. In addition, AC streams the surface of electrical wire, but DC streams overall of electrical wire. Digital load, which is operated by DC, has increased in modern times. The step of convert of AC-DC has to be reduced. When we turn the dispersed AC-DC converters into the concentrated AC-DC converter, it can improve the effective of the whole system. Further more, if digital society develops more than now and the time of electric vehicle comes, the need of DC will increase much more than these days. This paper suggests that DC output of distributed power source and high efficient 3 phase PWM converter can control the adjustment of output voltage, harmonic restraint, power factor improvement and dump power.