• 제목/요약/키워드: liquid water content

검색결과 504건 처리시간 0.024초

Detection of Water Cloud Microphysical Properties Using Multi-scattering Polarization Lidar

  • Xie, Jiaming;Huang, Xingyou;Bu, Lingbing;Zhang, Hengheng;Mustafa, Farhan;Chu, Chenxi
    • Current Optics and Photonics
    • /
    • 제4권3호
    • /
    • pp.174-185
    • /
    • 2020
  • Multiscattering occurs when a laser transmits into dense atmosphere targets (e.g. fogs, smoke or clouds), which can cause depolarization effects even though the scattering particles are spherical. In addition, multiscattering effects have additional information about microphysical properties of scatterers. Thus, multiscattering can be utilized to study the microphysical properties of the liquid water cloud. In this paper, a Monte Carlo method was used to simulate multi-scattering transmission properties of Lidar signals in the cloud. The results showed the slope of the degree of linear polarization (SLDLP) can be used to invert the extinction coefficient, and then the cloud effective size (CES) and the liquid water content (LWC) may be easily obtained by using the extinction coefficient and saturation of the degree of linear polarization (SADLP). Based on calculation results, a microphysical properties inversion method for a liquid cloud was presented. An innovative multiscattering polarization Lidar (MSPL) system was constructed to measure the LWC and CES of the liquid cloud, and a new method based on the polarization splitting ratio of the Polarization Beam Splitter (PBS) was developed to calibrate the polarization channels of MSPL. By analyzing the typical observation data of MSPL observation in the northern suburbs of Nanjing, China, the LWC and CES of the liquid water cloud were obtained. Comparisons between the results from the MSPL, MODIS and the Microwave radar data showed that, the microphysical properties of liquid cloud could be retrieved by combining our MSPL and the inversion method.

반부숙상태 돈분뇨 액비의 저장기간 및 폭기여부에 따른 특성 변화 (Changes in Characteristics of Semi-cured Pig Manure Liquid Fertilizer according to the Storage Duration and Aeration)

  • 정광화;박회만;이동준;김중곤;김현종
    • 유기물자원화
    • /
    • 제30권4호
    • /
    • pp.109-122
    • /
    • 2022
  • 현재 국내 양돈농가에서 발생하는 돼지분뇨 성상은 수분함량이 97% 정도인 슬러리 형태가 대부분이다. 돈사에서 배출되는 돼지분뇨 슬러리는 돼지의 분뇨와 돈사 내부 청소 물 등이 혼합된 성상의 액상물질이다. 본 연구에서는 공기공급 여부와 저장기간의 경과에 따른 돼지분뇨 액비의 부숙정도와 성상변화를 분석하기 위하여, 국내에서 운용 중인 액비화시설의 후단 공정에서 채취한 돼지분뇨 슬러리를 재료로 하여 120일 동안 실험을 수행하였다. 밀폐형 회분식 반응조를 이용하여 실험을 수행한 결과, 돼지분뇨 슬러리 액비의 부숙도는 공기공급구가 비공급구에 비해 더 양호하였으며 액비 저장기간이 경과 함에 따라서 액비가 부숙완료 상태로 빨리 전환되는 경향이 있었다. 실험개시 시에 97.90% 수준이던 액비의 수분함량 평균값이 실험 완료 시에는 공기공급구의 경우 96.82%, 비 공급구는 97.33% 수준을 나타냄으로써 공기공급구에서의 수분함량 감소가 상대적으로 더 높았다. 실험개시시에 8.82 수준이었던 액비의 pH는 실험완료 시에 공기공급구에서는 7.57, 비 공급구에서는 8.75 수준으로 변화하였다. 액비 중의 질소함량은 실험개시 시에 평균 0.198 mg/L 수준이었으나 실험완료 시에는 공기공급구에서는 0.076 mg/L, 비 공급구에서는 0.121 mg/L 수준으로 낮아졌다. 액비 중의 인산(P2O5)농도는 저장기간의 경과에 따라 비폭기처리구가 폭기처리구에 비해 감소 정도가 상대적으로 더 높았다. 실험결과를 종합해볼 때 돼지분뇨 액비에 공기를 공급하는 경우 그리고 저장기간을 길게 하였을 때 액비품질이 개선되는 것으로 판단된다.

벼에 대한 돈분뇨 혐기성 소화액비의 시용적량 구명 (Application Amount of Anaerobic Digestion Waste Water from Methane Fermentation of Pig Manure on Rice)

  • 임동규;박우균;권순익;남재작;이상범
    • 한국환경농학회지
    • /
    • 제21권4호
    • /
    • pp.248-254
    • /
    • 2002
  • 가축분뇨를 혐기성소화하여 메탄가스를 생산하고 난 다음 혐기성 소화액비를 비료자원으로 활용하기 위하여 농가포장에서 액비의 시용적량을 구명하였다. 벼 생육상황은 액비 100%+화학비료구가 전 시기를 통해 가장 양호하였으며, 그 다음으로 표준시비구가 분얼기에만 양호하였으나 그 이후에는 표준시비구 액비 100%구 및 액비 150%구 간에는 서로 차이가 없었다. 시기별 식물체중 전질소함량은 분얼기 및 출수기에는 추비의 영향으로 표준시비구가, 유수형성기에는 액비 100%+화학비료구가 높았다. 벼 수량은 액비 100% 및 150%구들이 표준시비구와 비슷하거나 약간 증수되었으며, 액비 100%+화학비료구는 고중의 증가 및 도복으로 인하여 표준시비구보다 수량이 오히려 약간 낮았다. 수확기 질소흡수량은 표준시비구가 가장 높았고, 시비질소 효율은 액비 100%구에서, 시비질소 이용율은 액비 100%+화학비료구에서 높았다. 시기별 토양중 $NH_4-N$$NO_3-N$함량 변화는 액비 100%+화학비료구가 타 처리구보다 높았다. 시기별 관개수 중 $NH_4-N$$NO_3-N$함량 변화는 분얼비의 영향으로 급격히 증가하였다가 급격히 감소하였는데, 증가한 시기에는 표준시비구 및 액비 100%+화학비료구가 가장 높았다. 시기별 침투수 중 $NH_4-N$함량 변화는 액비 150%구들에서 많이 용탈되었고, $NO_3-N$ 함량은 액비에 화학비료를 추비한 구들에서 많이 용탈되었다. 혐기성 소화액비는 액비 중의 질소성분을 분석하여서 표준시비량의 질소성분에 맞추어 시용하여야 한다.

Corrosion Characteristics of HT-9 in 500℃ and 650℃ Pb-Bi Liquid Metal

  • Song, T.Y.;Cho, C.H.
    • Corrosion Science and Technology
    • /
    • 제5권3호
    • /
    • pp.94-98
    • /
    • 2006
  • The next generation nuclear power reactor will use Pb-Bi as the cooling material. The steel structure materials such as HT-9 used in the reactor suffer from corrosion when they are exposed to high temperature Pb-Bi. Therefore corrosion should be prevented to use Pb-Bi as the coolant material without any safety problem. One method is to control the oxygen content in Pb-Bi. An appropriate amount of oxygen in Pb-Bi can produce a thin oxide layer on steel, and this layer protects the steel from corrosion attack. Since the required oxygen content in Pb-Bi is in the range of $10^{-5}$ to $10^{-7}$ wt%, this small oxygen content can be controlled by flowing a mixture of hydrogen gas and water vapor. The stagnant corrosion test of HT-9 samples was performed by controlling the oxygen content up to 2,000 hours. The corrosion behavior of HT-9 was analyzed at the temperatures of $500^{\circ}C$ and $650^{\circ}C$ with a reduced condition and a oxygen content of $10^{-6}$ wt%.

한방 황련 마스크팩의 효능 검증 및 상품화 가능성 조사 (Research on Effects and Possibility of Commercialization of Coptidis Rhizoma Mask Pack)

  • 이규영;홍철희
    • 한방안이비인후피부과학회지
    • /
    • 제28권1호
    • /
    • pp.100-108
    • /
    • 2015
  • Objectives : This study was planned to examine the enhancing effect of Coptidis Rhizoma mask pack on water, oil contents and skin texture, and to check the possibility of commercialization. Methods : We measured the change of water, oil contents and skin texture before and after the use of Coptidis Rhizoma mask pack. Measuring was conducted twice at an interval of ten days using accurate SK-03 skin analyzer. Measuring site was right and left SI18 and CV24 acupoints. Results : We can examine the improvement of water, oil contents and skin texture on every acupoints measured, except for CV24. On CV24, no difference was observed from water contents of both 1st, 2nd visit, and skin texture of 1st visit. Conclusions : We could confirm the boosting effect of Coptidis Rhizoma mask pack on water, oil contents and skin texture, especially around the SI18 acupoints. We should take follow-up measures to improve the absorption of a liquid herbal medicine around the CV24 acupoint, and heighten the potential for commercialization.

습식분쇄공정에서 액상매체가 실리콘 분쇄 및 산화특성에 미치는 영향 (The Effect of Liquid Medium on Silicon Grinding and Oxidation during Wet Grinding Process)

  • 권우택;김수룡;김영희;이윤주;신동근;원지연;오세천
    • 한국세라믹학회지
    • /
    • 제51권2호
    • /
    • pp.121-126
    • /
    • 2014
  • The influence of a liquid medium duringa wet-milling process in the grinding and oxidation of silicon powder was investigated. Distilled water, dehydrated ethanol and diethylene glycol were used as the liquid media. The applied grinding times were 0.5, 3, and 12 h. Ground silicon powder samples were characterized by means of aparticle size analysis, scanning electron microscopy(SEM), x-ray powder diffraction (XRD), FT-IR spectroscopy and by a chemical composition analysis. From the results of the characterization process, we found that diethylene glycol is the most efficient liquid medium when silicon powder is ground using a wet-milling process. The FT-IR results show that the Si-O band intensity in an unground silicon powder is quite strongbecause oxygen becomes incorporated with silicon to form $SiO_2$ in air. By applying deionized water as a liquid medium for the grinding of silicon, the $SiO_2$ content increased from 4.12% to 31.7%. However, in the cases of dehydrated ethanol and diethylene glycol, it was found that the $SiO_2$ contents after grinding only changed insignificantly, from 4.12% to 5.91% and 5.28%, respectively.

Alkali activated ceramic waste with or without two different calcium sources

  • Zedan, Sayieda R.;Mohamed, Maha R.;Ahmed, Doaa A.;Mohammed, Aya H.
    • Advances in materials Research
    • /
    • 제4권3호
    • /
    • pp.133-144
    • /
    • 2015
  • The aim of this investigation is to prepare geopolymer resin by alkali activation of ceramic waste (AACW) with different sodium hydroxide (NaOH) and liquid sodium silicate (LSS) concentrations. In order to prepare geopolymer cement, AACW was replaced by 10 and 30 % by weight (wt.,) of concrete waste (CoW) as well as 10 and 30 wt., % ground granulated blast-furnace slag (GGBFS). The results showed that, the compressive strength of AACW increases with the increase of activator content up to 15:15 wt., % NaOH: LSS. All AACW hardened specimens activated by 3:3 (MC6), 6:6 (MC12), 12:12 (MC24) and 15:15 wt., % (MC30) NaOH: LSS destroyed when cured in water for 24h. The MC18 mix showed higher resistivity to water curing. The results also showed that, the replacement of AACW containing 9:9 wt., % NaOH: LSS (MC18) by 10 (MCCo10) and 30 (MCCo30) wt., % CoWdecreased the compressive strength at all ages of curing. In contrast, the MCCo10 mix showed the lower chemically combined water content compared to MC18 mix. The MCCo30 mix showed the higher chemically combined water content compared to MC18 and MCCo10 mixes. The compressive strength and chemically combined water of all AACWmixes containing GGBFS (MCS10 and MCS30) were higher than those of AACWwith no GGBFS (MC18). As the amount of GGBFS content increases the chemically combined water increases. The x-ray diffraction (XRD) proved that as the amount of CoWcontent increases, the degree of crystallinity increases. Conversely, the replacement of AACW by GGBFS leads to increase the amorphiticity character. The infrared spectroscopy (FTIR) confirms the higher reactivity of GGBFS compared to CoW as a result of successive hydration products formation, enhancing the compaction of microstructure as observed in scanning electron microscopy (SEM).

목초액 담지체를 골재로 사용한 폴리머 시멘트계 내장마감재의 성능평가 (Performance Evaluation of Polymer Cementitious Interior Finish Using Light-Weight Aggregates Containing Pyroligneous Liquid)

  • 이채영;김주영;김완기
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2014년도 춘계 학술논문 발표대회
    • /
    • pp.218-219
    • /
    • 2014
  • The purpose of this study is to develop eco-friendly internal material of acrylic emulsion mortars using light-weight aggregate carrier which contains pyroligneous liquid. Four types of light-weight aggregates (vermiculite, perlite, charcoal, zeolite) that are widely used in building materials are selected and the properties such as adhesion, water absorption coefficient, antibiosis, crack and impact resistance are evaluated in accordance with KS F 4715. As a result, the properties of acrylic emulsion mortars using light-weight aggregate carrier are satisfied with KS requirements. The antibiosis is improved with increasing zeolite light-weight carrier content.

  • PDF

An Amperometric Proton Selective Sensor with an Elliptic Microhole Liquid/Gel Interface for Vitamin-C Quantification

  • Faisal, Shaikh Nayeem;Hossain, Md. Mokarrom;Lee, Hye-Jin
    • Journal of Electrochemical Science and Technology
    • /
    • 제1권2호
    • /
    • pp.121-126
    • /
    • 2010
  • An amperometric ascorbic acid selective sensor utilizing the transfer reaction of proton liberated from the dissociation of ascorbic acid in aqueous solution across an elliptic micro-hole water/organic gel interface is demonstrated. This redox inactive sensing platform offers an alternative way for the detection of ascorbic acid to avoid a fouling effect which is one of the major concerns in redox based sensing systems. The detection principle is simply measuring the current change with respect to the assisted transfer of protons by a proton selective ionophore (e.g., ETH 1778) across the micro-hole interface between the water and the polyvinylchloride-2-nitrophenyloctylether gel phase. The assisted transfer reaction of protons generated from ascorbic acid across the polarized micro-hole interface was first characterized using cyclic voltammetry. An improved sensitivity for the quantitative analysis of ascorbic acid was achieved using differential pulse stripping voltammetry with a linear response ranging from 1 to $100\;{\mu}M$ concentrations of ascorbic acid. As a demonstration, the developed sensor was applied for analyzing the content of vitamin-C in different types of commercial pharmaceutical tablets and syrups, and a satisfactory recovery from these samples were also obtained.

폴리우레탄 수지의 물성 및 접착특성에 관한 연구 (A Study on the Physical Properties and Adhesion Characteristics of Polyurethane Resin)

  • 김영준;장기영;김구니;전용철;유종선;박상욱
    • Elastomers and Composites
    • /
    • 제31권2호
    • /
    • pp.104-110
    • /
    • 1996
  • The polyurethane was synthesized by the reaction of polycaprolactone diol(Mw 2000), 4,4'-diphenylmethane diisocyanate and 1,4-butanediol as the chain extender. Also, the modified polyurethane polymers based on liquid polybutadiene as a part of soft segment and dimethylolpropionic acid as a chain extender, giving polyurethane with various polarity, were synthesized. The thermal, mechanical, adhesion properties and water contact angles of the polyurethanes were examined. From the result of the water contact angle, the polarity of the acid modified PU containing 6% acid content was unchanged but mechanical and adhesion properties were improved. The water contact angles on polybutadiene modified PU films were increased with increasing polybutadiene content. The mechanical properties of the polybutadiene modified PU were higher than that of acid modified PU. However, the mechanical properties were reduced as polybutadiene content increased. The result is presumably due to phase separation between hard segment and soft segment. The peel strength of the polyurethane introduced with 5wt% polybutadiene was improved about 150% than that of unmodified PU. The same as the mechanical properties, the more polybutadiene was introduced, the lower peel strength was obtained.

  • PDF