• Korean Journal of Optics and Photonics
• /
• v.27 no.5
• /
• pp.174-180
• /
• 2016

A tunable optical delay line is designed, fabricated, and characterized. The tunable delay line consists of four polymer-ring add/drop filters with delay waveguides between adjacent ones. The polymer waveguide is a buried structure, designed to be square with core width and height of $1.8{\mu}m$. The refractive indices of the core and cladding polymer are 1.48 and 1.37 respectively. The large index difference and small cross section of the waveguide enable us to realize a compact device using a small radius of curvature. Four pairs of electrodes are evaporated above the add/drop filters to provide heating currents for thermal tuning. In measurements we can identify variable time delays of 110, 225, and 330 ps in proportion to the number of delay lines.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.1
• /
• pp.45-51
• /
• 2003

Stereo bird's-eyes-view was prepared for 3-dimensional view of various forms of Jecheon city, and 3-dimensional simulation was applied to it so as to show it in moving pictures in spatial. In manufacturing stereo bird's-eyes-view, perspective technology was used in image-making technology, and the basic material images are prepared as fellows: used EOC Images from Arirang-1 satellite, created DEM whose error was optionally geometric corrected after drawn from the contour line of the map on a scale of l/5,000 manufactured by national geography institute as a national standard map, and classified road lines which were manufactured as a road layer vector file of a map on a scale of l/l,000 and then overlay it over the three dimensional image of target area. Especially for the connectivity with address system to be used in new address, an arterial road map on a scale of l/l,000 that had been manufactured to grant new address was used in maximum in road network structure data of city area in this study.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.907-915
• /
• 2002

In this paper, a compact digital phase shifter to be used an active phased array antenna system for satellite communications was proposed. The even and odd mode analysis for a given reflection-type phase shifter, which uses a folded hybrid coupler as a base element, was performed and the design parameters were derived. Also, to verify experimentally the electrical performances of the proposed structure, X-band 4-bit digital phase shifter was designed and fabricated using Teflon soft substrate $({\varepsilon}_r; =\;2.17)$. Its circuit size was less than 3.5 cm $\times$ 3.0 cm, and it exhibited at least 50 % size reduction as compared with the conventional unfolded configuration. The experimental results of the fabricated phase shifter showed that the average insertion loss and insertion loss variation were less than 3.5 dB, $\pm$ 0.6 dB within the operating band, 7.9 ~ 8.4 GHz, respectively. And, input and output return loss were more than 10 dB, respectively. Also, the phase response of the phase shifter showed 4-bit operation with $\pm$3$^{\circ}$ rms phase error.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.36.3-37
• /
• 2015

4C39.25 (0923+392) is a distant radio loud AGN placed at redshift 0.695. The motivation of our work is peculiar properties 4C39.25. Firstly, it has a conspicuous distinction of jet direction between kilo-parsec scale observation made by VLA (Kollgaard et al. 1990) and the parsec scale observation by VLBA (Kellermann et al. 1998). This might indicate episodic-jet activity which recently turned on. This object currently shows two stationary compact parsec-scale components which are bright jet component on east and less luminous core on west. Also, it is known that there have been superluminal jet components which are flowing from the core toward east, and then merging with the bright jet component (Marscher et al. 1991, Alberdi et al. 2000, Lister et al. 2013). Although 4C39.25 seems to be a blazar-like source having broad emission lines (SDSS) and superluminal motion, its property that jet component is brighter than the core is different from ordinary blazars. Furthermore, it has young radio galaxy-like properties such as non-variation in total flux (Alberdi et al. 1997, 2000, MOJAVE database) and high frequency peak at spectral energy distribution (Orienti et al 2007). Such complex properties led us to make recent observations to reveal precise properties and new changes of the source. We used Korean VLBI Network (KVN) and VLBI Exploration of Radio Astronomy (VERA) Array (KaVA) which provide high-frequency (23GHz and 43GHz) and high spatial resolution (1.2mas and 0.6mas). Therefore, this system is suitable for morphological and physical research on parsec scale structure. We present results for several epochs observed during 2013 to 2014, mainly focusing on morphological changes of 4C39.25 using KaVA images.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1745-1747
• /
• 2004

In order to anticipate gradual increase of fault current in electric power systems, current limiting technology and current limiting device has been investigated for a long time. But the commercial use of current limiting device was delayed due to the lack of effective method to insert impedance to the elective power systems without loss and surplus defects. However, novel current limiting device, which use superconducting materials, was considered as a dream technology to be applied in a distribution and transmission lines. LG Industrial systems and KERPI started to investigate resistive type superconducting fault current limiters in order to develop 154kV fault current limiters and this year, we succeed to test 3 phase 6.6kV/200A fault current limiters. Based on these achievements, 24kV superconducting fault current limiters will be realized withing 3 years which could be tested in a real fields. In this paper, the developments of fault current limiting module which use YBCO thin films, cryogenic systems, the structure and construction of 3 phase fault current limiters and finally the test results of 6.6kV superconducting fault current limiters will be introduced.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.2
• /
• pp.265-269
• /
• 2019

Ebstein's anomaly is attached to the right ventricle with the tricuspid leaf attached to the lower right ventricle without any attachment to the tricuspid annulus. Most patients in their 20s are alive. Patients older than 25 years of age are similar in the incidence of heart failure and sudden death, and survive approximately 70% from 2 years, and 50% from 3 years, from 5% to over 50 years of age. Through this example, Ebstein's anomaly exists in various forms. A 22 year old case with WPW syndrome and those who survived to 77 years of age are reported. The normal heart structure in the apical four-chamber view should be observed on similar lines, even though the tricuspid annulus is slightly lower than the mitral annulus. If not, there will be some doubt regarding this anomaly. Furthermore, echocardiography plays an important role in the diagnosis and prognosis of congenital heart disease.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1247-1267
• /
• 2014

Real-Time Hybrid Simulation (RTHS) is a novel approach conceived to evaluate dynamic responses of structures with parts of a structure physically tested and the remainder parts numerically modelled. In RTHS, delay estimation is often a precondition of compensation; nonetheless, system delay may vary during testing. Consequently, it is sometimes necessary to measure delay online. Along these lines, this paper proposes an online delay estimation method using least-squares algorithm based on a simplified physical system model, i.e., a pure delay multiplied by a gain reflecting amplitude errors of physical system control. Advantages and disadvantages of different delay estimation methods based on this simplified model are firstly discussed. Subsequently, it introduces the least-squares algorithm in order to render the estimator based on Taylor series more practical yet effective. As a result, relevant parameter choice results to be quite easy. Finally in order to verify performance of the proposed method, numerical simulations and RTHS with a buckling-restrained brace specimen are carried out. Relevant results show that the proposed technique is endowed with good convergence speed and accuracy, even when measurement noises and amplitude errors of actuator control are present.

• Journal of the Korean Magnetics Society
• /
• v.17 no.6
• /
• pp.242-245
• /
• 2007

Conduction noise attenuation by composite sheets of high magnetic and dielectric loss has been analyzed by using electromagnetic field simulator which employs finite element method. The simulation model consists of microstrip line with planar input/output ports and noise absorbers (magnetic composite sheets containing iron flake particles as absorbent fillers). Reflection and transmission parameters $(S_{11}\;and\;S_{21})$ and power loss are calculated as a function of frequency with variation of sheet size and thickness. The simulated value is in good agreement with measured one and it is demonstrated that the proposed simulation technique can be effectively used in the design and characterization of noise absorbing materials in the RF transmission lines.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.211-216
• /
• 2005

In this paper, GPS/PCS/Satellite DMB compact chip antenna is designed using stacked meander line for mobile communication handset. The fabricated antenna size is $12.52mm\times19.95\times1.05mm$. The coupling is adjusted by via and arrangement among meander lines to improve FR(Frequency Ratio) and return-loss. The fabricated antenna achieve triple-band. The resonance frequencies are 1.696 GHz, 1.888 GHz and 2.680 GHz. The impedance bandwidths are 150 MHz, 120 MHz and 60 MHz. The maximum gains of antenna are 0.08 dBi, 1.70 dBi and -1.27 dBi at resonance frequencies.

• Journal of Agricultural Extension & Community Development
• /
• v.20 no.1
• /
• pp.173-203
• /
• 2013

This study aims to find the effective policy devices for attracting enterprises in rural areas. In the first place, the result of this study suggest two directions fundamentally as follows: Firstly, the government works on more positive lines and from more integrated viewpoint. Secondly, it give the first consideration to the big-enterprises for attracting enterprises in rural areas. Next, the study suggest three practical policy implements also. First, the government put an emphasis on construction favorable infra structure to enterprises's activity. Second, it is necessary to strengthen the economic supports for location of enterprises in rural areas. Third, the rural self-government make effort strongly to develop the activity to attract enterprises.