• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.897-900
• /
• 2007

본 논문은 BLDC 서보모터를 사용하는 power-by-wire(PBW) 시스템을 위한 DSP 제어기와 IGBT 인버터 드라이버를 설계하는 연구를 제안한다. 이 BLDC 서보모터 시스템은 DSP(Digital Signal Processor)와 IGBT 인버터 모듈로써 구현되어진다. PBW 시스템은 직선 추력 동작을 위해 서보 모터의 속도 제어가 필요하다. 본 논문에서는 벡터 제어와 min-max PWM 기술로 이러한 서보 제어기를 구현한다. 제어기의 CPU로써, TMS320F2812 DSP는 PWM(펄스폭변조) 파형발생기, A/D변환기, SPI(직병렬인터페이스) 포트 그리고 많은 입/출력 포트 등을 가지고 있기 때문에 채택되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1146-1151
• /
• 2003

Pneumatic servo valve is an electro-mechanical device which change electric signals to a proper pneumatic signals, that is, flowrate and pressure. In this study, a pneumatic servo valve was designed and each simulation was conducted on any variation in the flowrate depending upon the magnetic force of the linear force motor and the displacement of the spool. And permanent magnet was used as a material for the plunger of the servo valve. Thereby, a low electrical power consumption type coil was desinged. And a modeling for the coil design was conducted by using the magnetic circuit. also, the feasibility of the modeling was verified by using a commercial magnetic field analysis program. The designed and fabrication of the spool and sleeve, position sensor, servo controller and the dynamic characteristic verified by the experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.77-79
• /
• 1997

This paper describes a nonlinear state observer to identify the rotor position and velocity of a hybrid-type linear pulse motor(LPM). Since the observer's error dynamics of a hybrid-type LPM is highly nonlinear, the stability of the proposed observer is analyzed using an approximated error model. The optimal choices of the proposed observer gains are also discussed. Our extensive simulation study shows that the proposed observer can identify rotor position and velocity and is robust with respect to uncertainties in mechanical parameters and load force.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.287-289
• /
• 1995

In this paper, We applied the $\mu$-stepping method on the Phase Excitation Sequence of Hybrid type LPM. Linear Pulse Motor can opeate in an open loop control as an effective positioning actuator. PWM driver was used for low power loss and automatically adjusted voltage at rate current. Finally we find that through the position-velocity for timing Triangular and Trapezoidal Profile are very affected by velocity and acceleration parameter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1607-1608
• /
• 2015

현대사회의 고속 고급 교통수단에 대한 요구에 부응하고, 고유가 및 온실가스 등 원유 기반의 교통 시스템의 문제를 해결하기 위해 교통 수단의 다양화 연구가 활발히 진행되고 있다. 석유문제가 심각한 상황으로 전개될 경우, 대륙과 대륙 그리고 국가와 국가 사이의 장거리 이동을 할 수 있는 교통수단은 전기로 추진되는 철도이다. 현재 대중화 되어있는 바퀴 식 철도차량은 초고속 운전 시 기하급수적으로 증가하는 소음, 공기저항 동력 전달의 한계, 레일의 마모라는 문제를 가지고 있으며 이러한 문제점을 가진 철도차량의 대안으로 선형 추진 시스템 연구가 진행 중이다[1] 국내에서는 LSM(Linear Synchronous motor)에 대한 연구가 활발히 진행되고 있으나 LPM 기반 철도 차량 추진시스템에 대한 연구는 이루어지지 않고 있다. 그러나 LSM 추진 시스템에 비하여 LPM 추진 시스템은 우수한 등판 능력, 광역범위의 주행 가능 영역, 경량화에 따른 높은 에너지 효율, 건설비 저감등 다양한 장점을 가지고 있으며 충분한 전략성을 가지고 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.174-178
• /
• 2002

This paper describes that single-sided linear induction motor is controlled by space vector pulse width modulation. Furthermore, it shows that the speed and thrust is adulated as give a each step reference by controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.43-45
• /
• 1994

This paper proposes the new method to calculate the static thrust and normal force of a hybrid type double-sided linear pulse motor by the coenergy which considered the magnetic nonlinealities. In the process of the computation, the nonlinear characteristics of the magnetic material were interpolated by the cubic spline method. And, to investigate the characteristics of the hybrid type DLPM, the static thrust and the normal force is shown as a function of displacement, input current and air airgap length. Also the simulation values are compared with the experimental ones obtained from a hybrid type DLPM.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.141-150
• /
• 2013

In this paper, the learnability of haptic icons was tested as a way of conveying turn-by-turn directions to users involved in navigation interactions with commercial smartphones. To do this, six most distinctive haptic icons were identified from those having different duration of each pulse, interval between pulses, and rhythm. Associations between the selected haptic icons and 3 pairs of navigation directions were analyzed using data gathered from 30 subjects by 7 point Likert scale. The haptic icons were then assigned to proper directions based on the results from that stereotype analysis. The results showed that the commercial smartphone with one linear motor at a fixed location is not capable of making hapticons to have clear directional stereotypes. The hapticons with poor stereotypes has no advantage in learnability compared to those of random assignment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.184-186
• /
• 1997

This paper proposes the analysis method considered the eddy current which is induced by the speed of LPM. To investigate reduction effect of thrust due to the eddy current, the magnetic equivalent circuit of LPM is modeled and its characteristics is analyzed according to the displacement of mover with the speed term when LPM is driven by the input of unit step and microstep.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.226-228
• /
• 1999

This paper presents an efficient analysis method using time-stepping finite element method for electric machines driven by pulse width modulation (PWM) inverter. In the method, the value of time-step is changed according to the PWM logic of inverter, and the calculation time can be reduced while maintaining analysis accuracy. Using the method, the dynamic characteristics of a permanent magnet linear synchronous motor (PMLSM) driven by PWM inverter are analyzed.