• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.148.5-148
• /
• 2001

In this report, an adaptive flight control law based on a linear-parameter-varying (LPV) model is presented for a flight control system. The control system is designed to track an output of a vehicle to a reference signal from the guidance system, which generates a reference flight path. The proposed adaptive control law adjusts the controller gains continuously on line as flight conditions change. The obtained adaptive controller guarantees global stability over a wide flight envelope. Computer simulation involving six-degree-of-freedom nonlinear flight dynamics is applied to Japan´s automatic landing flight experimental vehicle (ALFLEX) to examine the effectiveness of the proposed adaptive flight control law.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.3
• /
• pp.272-279
• /
• 1997

In this paper, a fuzzy generalized predictive control (FGPC) for non-linear plants is proposed. In the proposed method, the receding horizon control is applied to the control part, while fuzzy systems are used for the predictor part. It is suggested that the fuzzy predictor is time-varying affine with respect to input variables for easy computation of control inputs. Since the receding horizon control can be obtained only with a predictor instead of a plant model, the fuzzy predictor is obtained directly from input-output data without identifying a plant model. A parameter estimation algorithm is used for identifying the fuzzy predictor. The control inputs of the FGPC are computed by minimizing a receding horizon cost function with predicted plant outputs. The proposed controller has a similar architecture to the generalized predictive control (GPC) except for the predictor synthesis method, and thus may possess inherent good properties of the GPC. Computer simulations show that the performance of the FGPC is satisfactory.

• Journal of Information Processing Systems
• /
• v.12 no.3
• /
• pp.436-454
• /
• 2016

This research presents the battery discharge rate models for the energy consumption of mobile phone batteries based on machine learning by taking into account three usage patterns of the phone: the standby state, video playing, and web browsing. We present the experimental design methodology for collecting data, preprocessing, model construction, and parameter selections. The data is collected based on the HTC One X hardware platform. We considered various setting factors, such as Bluetooth, brightness, 3G, GPS, Wi-Fi, and Sync. The battery levels for each possible state vector were measured, and then we constructed the battery prediction model using different regression functions based on the collected data. The accuracy of the constructed models using the multi-layer perceptron (MLP) and the support vector machine (SVM) were compared using varying kernel functions. Various parameters for MLP and SVM were considered. The measurement of prediction efficiency was done by the mean absolute error (MAE) and the root mean squared error (RMSE). The experiments showed that the MLP with linear regression performs well overall, while the SVM with the polynomial kernel function based on the linear regression gives a low MAE and RMSE. As a result, we were able to demonstrate how to apply the derived model to predict the remaining battery charge.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.89-97
• /
• 2008

Chaotic behavior in motor systems is undesired dynamics in real-time implementation since the speed is oscillated in a wide range and the torque is changed by a random manner. We present an adaptive control approach for time-varying permanent-magnet synchronous motors (PMSM) with chaotic phenomenon. We consider that its parameters are changed randomly within certain bounds. First, a nonlinear system model of a PMSM is transformed to derive a nominal linear control strategy. Then, an auxiliary control for compensating real-time control error occurred by system perturbation due to parameter change is designed by using Lyapunov stability theory. Numerical simulation is accomplished for evaluating its efficiency and reliability comparing with the traditional control method. Additionally, we test our control method in real-time motor experiment including a PSoC based drive system to demonstrate its practical applicability.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.4
• /
• pp.29-37
• /
• 2004

This paper provides a reliable H$_{\infty}$ state feedback controller design method for delayed singular systems with actuator failures occurred within the prescribed subset. The sufficient condition for the existence of a reliable H$_{\infty}$ controller and the controller design method are presented by linear matrix inequality(LMI), singular value decomposition, Schur complements, and changes of variables. The proposed controller guarantees not only asymptotic stability but also H$_{\infty}$ norm bound in spite of existence of actuator failures. Since the obtained sufficient condition can be expressed as an LMI fen all variables can be calculated simultaneously. Moreover, the controller design method can be extended to the problem of robust reliable H$_{\infty}$ controller design method for singular systems with parameter uncertainties, time-varying delay, and actuator failures. A numerical example is given to illustrate the validity of the result.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.3
• /
• pp.19-32
• /
• 2000

This paper suggests the variable structure controller with a new variable boundary layer for the accurate tracking control of the variable structure systems. Up to now, variable structure controller (VSC) applying the variable boundary layer did not remove chattering from an arbitrary initial state of the system trajectory because VSC has the limited initial state according to the fixed sliding surface. But, by using the linear time-varying sliding surfaces, the scheme has the robustness against chattering from all states. The suggested method can be applied to the second-order nonlinear systems with parameter uncertainty and extraneous disturbances, and has better tracking performance than the conventional method. To demonstrate the advantages of the proposed algorithm, it is applied to a two-link manipulator.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.1
• /
• pp.7-14
• /
• 2015

To implement an automatic picking system (APS) in distribution center with high precision and high dynamics, this paper presents a high gain observer-based robust speed controller design for a linear induction motor (LIM) drive. The force disturbance as well as the mechanical parameter variations such as the mass and friction coefficient gives a direct influence on the speed control performance of APS. To guarantee a robust control performance, the system uncertainty caused by the force disturbance and mechanical parameter variations is estimated through a high gain disturbance observer and compensated by a feedforward manner. While a time-varying disturbance due to the mass variation can not be effectively compensated by using the conventional disturbance observer, the proposed scheme shows a robust performance in the presence of such uncertainty. A Simulink library has been developed for the LIM model from the state equation. Through comparative simulations based on Matlab - Simulink, it is proved that the proposed scheme has a robust control nature and is most suitable for APS.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.1
• /
• pp.10-17
• /
• 2016

In general, articulated robot control technology is limited to the design of robot arm control systems considering each joint of the robot joint as a simple servomechanism. This method describes the varying dynamics of a manipulator inadequately because it neglects the motion and configuration of the whole arm mechanism. The changes of the parameters in the controlled system are significant enough to render conventional feedback control strategies ineffective. This basic control system enables a manipulator to perform simple positioning tasks such as in the pock and place operation. However, joint controllers are severely limited in precise tracking of fast trajectories and sustaining desirable dynamic performance for variations of payload and parameter uncertainties. In many servo control applications the linear control scheme proposes unsatisfactory, therefore, a need for nonlinear techniques that increasing. for Forging process automation.

• Nuclear Engineering and Technology
• /
• v.27 no.3
• /
• pp.336-343
• /
• 1995

The Self Tuning Regulator(STR) method which is an approach of adaptive control theory, is ap-plied to design the fully automatic power controller of the nonlinear reactor model. The adaptive control represent a proper approach to design the suboptimal controller for nonlinear, time-varying stochastic systems. The control system is based on a third­order linear model with unknown, time-varying parameters. The updating of the parameter estimates is achieved by the recursive extended least square method with a variable forgetting factor. Based on the estimated parameters, the output (average coolant temperature) is predicted one-step ahead. And then, a weighted one-step ahead controller is designed so that the difference between the output and the desired output is minimized and the variation of the control rod position is small. Also, an integral action is added in order to remove the steady­state error. A nonlinear M plant model was used to simulate the proposed controller of reactor power which covers a wide operating range. From the simulation result, the performances of this controller for ramp input (increase or decrease) are proved to be successful. However, for step input this controller leaves something to be desired.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.9
• /
• pp.1031-1041
• /
• 1999

기존의 한글에 대한 입술 애니메이션 방법은 음소의 입모양을 몇 개의 입모양으로 정의하고 이들을 보간하여 입술을 애니메이션하였다. 하지만 발음하는 동안의 실제 입술 움직임은 선형함수나 단순한 비선형함수가 아니기 때문에 보간방법에 의해 중간 움직임을 생성하는 방법으로는 음소의 입술 움직임을 효과적으로 생성할 수 없다. 또 이 방법은 동시조음도 고려하지 않아 음소들간에 변화하는 입술 움직임도 표현할 수 없었다. 본 논문에서는 동시조음을 고려하여 한글을 자연스럽게 발음하는 입술 애니메이션 방법을 제안한다. 비디오 카메라로 발음하는 동안의 음소의 움직임들을 측정하고 입술 움직임 제어 파라미터들을 추출한다. 각각의 제어 파라미터들은 L fqvist의 스피치 생성 제스처 이론(speech production gesture theory)을 이용하여 실제 음소의 입술 움직임에 근사한 움직임인 지배함수(dominance function)들로 정의되고 입술 움직임을 애니메이션할 때 사용된다. 또, 각 지배함수들은 혼합함수(blending function)와 반음절에 의한 한글 합성 규칙을 사용하여 결합하고 동시조음이 적용된 한글을 발음하게 된다. 따라서 스피치 생성 제스처 이론을 이용하여 입술 움직임 모델을 구현한 방법은 기존의 보간에 의해 중간 움직임을 생성한 방법보다 실제 움직임에 근사한 움직임을 생성하고 동시조음도 고려한 움직임을 보여준다.Abstract The existing lip animation method of Hangul classifies the shape of lips with a few shapes and implements the lip animation with interpolating them. However it doesn't represent natural lip animation because the function of the real motion of lips, during articulation, isn't linear or simple non-linear function. It doesn't also represent the motion of lips varying among phonemes because it doesn't consider coarticulation. In this paper we present a new coarticulation model for the natural lip animation of Hangul. Using two video cameras, we film the speaker's lips and extract the lip control parameters. Each lip control parameter is defined as dominance function by using L fqvist's speech production gesture theory. This dominance function approximates to the real lip animation of a phoneme during articulation of one and is used when lip animation is implemented. Each dominance function combines into blending function by using Hangul composition rule based on demi-syllable. Then the lip animation of our coarticulation model represents natural motion of lips. Therefore our coarticulation model approximates to real lip motion rather than the existing model and represents the natural lip motion considered coarticulation.