• 제목/요약/키워드: linear low density polyethylene

검색결과 87건 처리시간 0.024초

Structure-property relations for polymer melts: comparison of linear low-density polyethylene and isotactic polypropylene

  • Drozdov, A.D.;Al-Mulla, A.;Gupta, R.K.
    • Advances in materials Research
    • /
    • 제1권4호
    • /
    • pp.245-268
    • /
    • 2012
  • Results of isothermal torsional oscillation tests are reported on melts of linear low density polyethylene and isotactic polypropylene. Prior to rheological tests, specimens were annealed at various temperatures ranging from $T_a$ = 180 to $310^{\circ}C$ for various amounts of time (from 30 to 120 min). Thermal treatment induced degradation of the melts and caused pronounced decreases in their molecular weights. With reference to the concept of transient networks, constitutive equations are developed for the viscoelastic response of polymer melts. A melt is treated as an equivalent network of strands bridged by junctions (entanglements and physical cross-links). The time-dependent response of the network is modelled as separation of active strands from and merging of dangling strands with temporary nodes. The stress-strain relations involve three adjustable parameters (the instantaneous shear modulus, the average activation energy for detachment of active strands, and the standard deviation of activation energies) that are determined by matching the dependencies of storage and loss moduli on frequency of oscillations. Good agreement is demonstrated between the experimental data and the results of numerical simulation. The study focuses on the effect of molecular weight of polymer melts on the material constants in the constitutive equations.

포장 조건에 따른 피망의 저장 중 품질 특성 변화 (Changes in Quality Characteristics of Bell Pepper Packaged with Different Films)

  • 박우포;조성환;김철환
    • 한국식품저장유통학회지
    • /
    • 제10권2호
    • /
    • pp.131-135
    • /
    • 2003
  • 피망에 대한 MA 저장에 적합한 포장재를 선발하기 위하여 기체에 대한 투과도가 다른 cast polypropylene (CPP), low density polyethylene (LDPE), polyolefin (MPD), polyolefin(PD961) 및 Linear low density polyethylene (LLDPE) 포장재로 피망을 포장하고 1$0^{\circ}C$에서 저장하면서 품질 변화를 고찰하였다. 저장 기간 중 포장 내부의 산소 농도는 4주까지 대체적으로 감소하였으나 그 이후에는 급격하게 증가하였다. 기체에 대한 투과성이 낮은 CPP로 포장한 시험구는 저장 4주에 산소의 농도가 10.4%, 이산화탄소의 농도가 4.5%로 다른 시험구에 비하여 산소의 농도는 낮고, 이산화탄소의 농도는 높았다. 저장 기간 중 피망의 중량 감소율은 LLDPE로 포장한 시험구가 가장 현저하였으며 다른 포장재로 포장한 시험구는 저장 5주까지도 1.5% 미만이었다. 다른 시험구에 비하여 CPP로 포장한 시험구의 총균수, 효모 및 곰팡이수가 많았는데, 저장 3주 이후에 그 차이가 현저하였다. 피망의저장 중 황색도를 나타내는 b값은 대체적으로 증가하였으며, 저장 4주가지 PD961과 MPD로 포장한 시험구가 다른 시험구에 비하여 높은 값을 나타내었다.

Polyethylene flow prediction with a differential multi-mode Pom-Pom model

  • Rutgers, R.P.G.;Clemeur, N.;Debbaut, B.
    • Korea-Australia Rheology Journal
    • /
    • 제14권1호
    • /
    • pp.25-32
    • /
    • 2002
  • We report the first steps of a collaborative project between the University of Queensland, Polyflow, Michelin, SK Chemicals, and RMIT University, on simulation, validation and application of a recently introduced constitutive model designed to describe branched polymers. Whereas much progress has been made on predicting the complex flow behaviour of many - in particular linear - polymers, it sometimes appears difficult to predict simultaneously shear thinning and extensional strain hardening behaviour using traditional constitutive models. Recently a new viscoelastic model based on molecular topology, was proposed by McLeish and carson (1998). We explore the predictive power of a differential multi-mode version of the porn-pom model for the flow behaviour of two commercial polymer melts: a (long-chain branched) low-density polyethylene (LDPE) and a (linear) high-density polyethylene (HDPE). The model responses are compared to elongational recovery experiments published by Langouche and Debbaut (19c99), and start-up of simple shear flow, stress relaxation after simple and reverse step strain experiments carried out in our laboratory.

$\gamma$-선 조사에 의한 LDPE, LLDPE의 가교특성에 관한 연구 (Study on the Crosslinking Characteristics of LDPE and LLDPE by $\gamma$-Ray Irradiation)

  • 김정일;박성현;강필현;노영창
    • 폴리머
    • /
    • 제25권5호
    • /
    • pp.657-664
    • /
    • 2001
  • 본 연구에서는 고분자 수지의 가교율 향상을 위하여 가교제를 첨가한 low density polyethylene (LDPE), linear low density polyethylene (LLDPE) 수지의 가교에 있어서 ${\gamma}$-선 조사의 효과를 조사하였다. LDPE와 LLDPE 시편들은 가교제와 혼합하여 13$0^{\circ}C$의 hot-press mold에서 sheet 형태의 준비하였다. ${\gamma}$-선은 질소분위기에서 50부터 150 kGy로 변화시키며 조사하였다. 이렇게 준비된 시편을 이용하여 방사선 조사선량, 가교제의 종류에 따른 가교율의 변화를 조사하였으며 가교에 따른 기계적 특성, 열안정성과 결정차도의 변화도 평가하였다. 그 견과 방사선 조사선량이 크고, 가교제가 첨가되면 가교율은 상승하였다. 그것과 비례하여 물리적 성질과 열적인 성질도 개선되었다. 그리고 방사선 조사에 의해서 순수한 수지의 겔화율이 증가하면 결정화도는 감소하였다.

  • PDF

선형 저밀도 폴리에틸렌/에틸렌 비닐아세테이트 블렌드 박막의 체적고유저항 특성 (The Volume Resistivity Characteristics of Linear Low Density Polyethylene/Ethylene Vinyl Acetate Blend Film)

  • 이태훈;신종열;오세영;이충호;이용우;홍진웅
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1998년도 추계학술대회 논문집
    • /
    • pp.195-198
    • /
    • 1998
  • In this paper, the physical and the volume resistivity properties due to linear low density polyethylene(LLDPE)/ethylene vinyl acetate(EVA) blends are studied. In order to measure the volume resistivity properties. the micro electrometer is used, the range of temperature and applying voltage are 25 to 120[$^{\circ}C$], form 100 to 1000[V] respectively. From FT-IR spectrum, LLDPE blended with EVA shows an absence of carbonyl and ether groups. From the experimental result of the volume resistivity properties, it is confirmed that the volume resistivity is decreased, which was attributed to the increase of molecular motions with the increase of temperature.

  • PDF

선형 저밀도 폴리에틸렌과 에틸렌 비닐아세테이트의 혼합비에 따른 체적고유저항 특성 (The Volume Resistivity Properties due to Mixture ratio of Linear Low Density Polyethylene and Ethylene Vinyl Acetate)

  • 박정구;육영수;신현택;신종열;이충호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 춘계학술대회 논문집
    • /
    • pp.552-555
    • /
    • 1999
  • In this paper, the volume resistivity properties due to mixture ration of linear low density polyethylene(LLDPE) and ethylene vinyl acetate(EVA) are studied. Electrodes is composed of upper electrode 37(mm $\Phi$), guardring electrode(inner 55(mm $\Phi$ ), and lower electrode 87(mm $\Phi$ In order to measure the leakage current, We used electrometer and stable oven with temperature controller. Measurement method is to measure the leakage current of next specimen after applying the voltage according to 'Step Apply Methods' for ten minutes. In order to measure the volume resistivity properties, the micro electrometer is used, the range of temperature and applying voltage are 25 to 100[$^{\circ}C$] to 100[V] respectively.

  • PDF

Mechanical Properties and Water Absorption of Rice Starch-Filled Linear Low Density Polyethylene

  • Wahab, Mohammad A.;Mottaleb, Mohammad A.
    • Macromolecular Research
    • /
    • 제9권6호
    • /
    • pp.297-302
    • /
    • 2001
  • Rice starch was incorporated into linear low density polyethylene (LLDPE) using a Brabender Plastic-Corder internal mixer at a temperature of 140$\^{C}$ and 40 rpm. The starch loading was varied from 0 to 30% with 5 intervals. Studies on brabender torque development, mechanical properties and water absorption were investigated. The starch loading did not influence the brabender torque significantly. With respect to mechanical properties; the tensile strength and elongation at break decrease with increasing starch loading. The Young's modulus also increases with the starch filling. Mechanical properties were deteriorated as the starch absorbed moisture. The rate of water absorption was dependent on the starch filling in the composites. The scanning electron microscope (SEM) analysis was performed for the tensile fracture surfaces and it revealed the starch agglomeration and a poor dispersion of starch in the LLDPE matrix.

  • PDF

저밀도 폴리에틸렌/메탈로센 선형 저밀도 폴리에틸렌 블렌드의 열적 거동 및 물성 (Thermal Behavior and Physical Properties of Low Density Polyethylene/Metallocene Linear Low Density Polyethylene Blends)

  • 김장엽;현욱;이동호;노석균;이상원;허완수
    • 폴리머
    • /
    • 제27권5호
    • /
    • pp.502-507
    • /
    • 2003
  • 메탈로센 선형 저밀도 폴리에틸렌 (m-LLDPE)과 저밀도 폴리에틸렌 (LDPE)을 용응 블렌딩 방법으로 블렌드를 제조하여 열적 거동 및 물성을 관찰하였다. LDPE/m-LLDPE1 블렌드는 LDPE조성이 50% 이상이면 두 개의 용융 피크가 관찰된 반면 다른 블렌드들은 단일한 용융 피크를 나타내었다. m-LLDPE에서 공단량체 함량이 감소할수록 용융 온도와 상대 결정화도가 증가하였다. 공단량체 함량이 2 wt%인 m-LLDPE1이 초기 탄성률이 가장 높게 관찰되었고, 공단량체 함량이 증가함에 따라 감소하였다. 블렌드에서 조성에 따른 초기 탄성률의 변화는 상대 결정화도의 거동과 유사하게 나타났다. 블렌드의 파괴 신율은 LDPE/m-LLDPE1과 LDPE/m-LLDPE2 블렌드에서 평균값보다 낮은 파괴 신율을 나타내었었다. m-LLDPE2의 용융 지수가 가장 높게 관찰되었고 공단량체 함량이 증가함에 따라 감소하는 경향을 나타내었다.

Decalin 용액에서 선형 저밀도 폴리에틸렌 입자의 결정화에 관한 연구 (A Study on Crystallization of Linear Low Density Polyethylene Particles from Decalin Solution)

  • 박근호;장영민
    • 한국응용과학기술학회지
    • /
    • 제29권3호
    • /
    • pp.370-376
    • /
    • 2012
  • 우리는 decalin 용액으로부터 결정화 통해 선형 저밀도 폴리에틸렌 (LLDPE) 입자를 제조하였다. 열 유도 상 분리 (TIPS) 공정에서 입자의 형성은 LLDPE/decalin 용액을 제어하여 냉각하는 동안에 형성되었다. 높은 폴리머 농도에서 결정화를 위한 핵 생성과 성장속도의 증가에도 불구하고, 일반적으로 저 농도에서 보다 큰 입자를 초래하였으며, 결과적으로 LLDPE는 decalin 용액에서 농도가 증가할수록 LLDPE 입자의 평균 직경이 증가했습니다. FE-SEM 의 현미경사진에서, 다양한 농도로부터 관찰된 입자는 10 ${\mu}m$ 보다 작았으며, 구형 형태를 나타내었다. 부가적으로 그 크기에 대한 효과를 보면, LLDPE 입자 크기 분포는 폴리머 농도가 높을 때가 폭이 컸다.

선형저밀도 폴리에틸렌 튜빙의 파손 메커니즘과 장기 정수압 거동 (Failure Mechanism and Long-Term Hydrostatic Behavior of Linear Low Density Polyethylene Tubing)

  • 원종일;정유경;신세문;최길영
    • 폴리머
    • /
    • 제32권5호
    • /
    • pp.440-445
    • /
    • 2008
  • 정수압 상태의 선형저밀도 폴리에틸렌 튜빙의 파손 메커니즘과 파손 모폴로지를 연구하였다. 비디오현미경과 주사전자현미경을 이용한 관찰 결과, 선형저밀도 폴리에틸렌 튜빙의 파손모드는 내면에서 외면으로 진전되는 크랙을 수반하는 취성파괴임을 확인하였다. 또한 산화유발시간과 적외선분광분석을 통하여, 파손된 선형저밀도 플리에틸렌 튜빙의 단면상에 열화에 의한 발열 피크와 카르보닐 피크의 증가를 관찰하였다. 열 가속에 의한 음력과 수명특성 사이의 관계를 고려한 선형저밀도 폴리에틸렌 튜빙의 가속수명시험법 및 시험장치를 개발하였다. 선형저밀도 폴리에틸렌 튜빙의 장기 정수압 상태의 수명을 예측하기 위해 아레니우스 모델과 와이블 분포를 적용한 통계학적 기법을 도입하였다. 그 결과, 사용온도 $25^{\circ}C$에서의 선형저밀도 폴리에틸렌 튜빙의 장기수명을 평가/분석하였다.