• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.236-238
• /
• 2005

In this paper, we propose a new discrete-time predictive current controller for a PMLSM(permanent magnet linear synchronous motor). The main objectives of the current controllers are that the measured stator current is tracked the command current value accurately and the transient interval is shorten as much as possible, in order to obtain high-performance of ac drive system. The conventional predictive current controller is hard to implement in full digital current controller since a finite calculation time causes a delay between the current sensing time and the time that take to apply the voltage to motor. A new control strategy is the schema that gets the fast adaptation of transient current change, the fast transient response tracking. Moreover, the simulation results will be verified the improvements of Predictive controller and accuracy of the current controller.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.717-719
• /
• 1997

This paper discusses approximate modelling of discrete-time linear time-varying system(LTVS). The wavelet transform is considered as a tool for representing and approximating a LTVS. The joint time-frequency properties of wave analysis are appropriate for describing the LTVS. Simulatly results is included to illustrate the popential application of the technique.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.1
• /
• pp.33-39
• /
• 1998

This paper discusses approximation modelling of discrete-time linear time-varying system(LTVS). The wavelet transform is considered as a tool for representing and approximating a LTVS. The joint time-frequency properties of wave analysis are appropriate for describing the LTVS. Simulation results is included to illustrate the potential application of the technique.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.2
• /
• pp.123-130
• /
• 1999

In discrete-time controlled system, sampling time is one of the critical parameters for control performance. It is useful to employ different sampling rates into the system considering the feasibility of measuring system or actuating system. The systems with the different sampling rates in their input and output channels are named multirate system. Even though the original continuous-time system is time-invariant, it is realized as time-varying state equation depending on multirate sampling mechanism. By means of the augmentation of the inputs and the outputs over one period, the time-varying system equation can be constructed into the time-invariant equation. The two multirate formulations have some trade-offs in the simplicity to construct the controller, the control performance. It is good issue to determine the suitable formulation in consideration of performance of them. In this paper, the two categories of multirate formulations will be compared in terms of the linear quadratic (LQ) cost function. The results are used to select the multirate formulation and the sampling rates suitable to the desired control performance.

• Transactions on Control, Automation and Systems Engineering
• /
• v.1 no.2
• /
• pp.121-127
• /
• 1999

In this paper, we present robust reliable H$\infty$ controller design methods of continuous and discrete uncertain time delay systems using LMI (linear matrix inequality) technique, respectively. Also the existence conditions of state feedback control are proposed . Using some changes of variables and Schur complements, the obtained sufficient conditions are transformed into an LMI form. The closed loop system by the obtained controller is quadratically stable with H$\infty$ norm bound for all admissible uncertainties, time delay, and all actuator failures occurred within the prespecified set. We show the validity of the proposed method through numerical example.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1783-1784
• /
• 2008

This paper presents a novel control technique to deal with networked control systems with neutral timedelay, which is known to highly degrade the control performance of the controlled system. The stability analysis and design method for a sampled-data fuzzy controller for discrete networked control systems (NCS). The neutral time-delay and sampling activity will complicate the NCS. And it make the stability analysis much more difficult than that for a continuous-time NCS. Based on the fuzzy control approach, linear matrix inequality (LMI)-based stability conditions are derived to guarantee the neutral T-S fuzzy system stability. The simulation results and practical experiments illustrate that the proposed controller design is realistic.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1872-1873
• /
• 2011

This paper presents a discrete-time approximate linear model of the continuous-time pulse-width-modulated linear system, and then, by employing the resultant model, a simple LQ suboptimal control scheme is proposed for a DC-DC step-down buck converter. The proposed scheme effectively regulates the output voltage to the desired level, which is also verified by the numerical simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.130-134
• /
• 1992

The ability of a robot system to comply to an environment via the control of tool-environment interaction force is of vital for the successful task accomplishment in many robot application. This paper presents the implementation of external force control for two dimensional contour following task using a commercial robot system. Force accommodation is used since a constraint imposed in our work is not to modify the commercial robot system. A linear, decoupled model of two dimensional contour following system in the discrete time domain is derived first. Then the experimental verification of linear control is obtained using a PUMA 560 manipulator with standard Unimation controller, Astek FS6-120A six axis wrist force sensor attached externally to the arm and LSI-11173 microcomputer. Experimentally obtained data shows that the RMS contact force error is 0.8246 N when following the straight edge and 2.3768 N when following 40 mm radius curved contour.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2630-2632
• /
• 2000

In this paper, a control technique of Takagi-Sugeno (TS) fuzzy systems with parametric uncertainties is developed. The uncertain TS fuzzy system is represented as an uncertain multiple linear system. The control problem of TS fuzzy system is converted into the stabilization problem of a uncertain multiple linear system. A sufficient condition for robust stabilization is obtained in terms of linear matrix inequalities (LMI). A Design example is illustrated to show the effectiveness of the proposed method.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.4
• /
• pp.372-378
• /
• 2007

This paper discusses Robust $H{\infty}$ control problems for networked control systems (NCSs) with time delays and subject to norm-bounded parameter uncertainties. Based on a new discrete-time model, two approaches of robust controller design are proposed. A numerical example and experimental verification with an NCS test bed are given to illustrate the feasibility and effectiveness of proposed design methodologies.