• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2634-2645
• /
• 1993

Dome structures of pressure vessels subjected to internal pressure are usually analyzed by linear elastic theory assuming small deformation. Geometric and material nonlinear behaviors appear in actual dome structures because of large deformation and loads exceeding yield strength. In this paper, linear and nonlinear analyses were performed for various hemispherical and torispherical domes to check the effects of geometric and material nonliearity on the stress and displacement by the finite element method. The effect of the geometric nonlinearity decreased the stress levels a lot for very thin general torispherical domes, which enables more realistic and effective design. The material nonlinear effects are negligible for hemispherical and optimum torispherical domes, and those are large for most of the general torispherical domes.

• 한국수자원학회논문집
• /
• 제32권4호
• /
• pp.417-426
• /
• 1999

횡유입이 없는 경우(sign곡선의 홍수파 유입)와 횡유입이 있는 경우(강우 유입)를 대상으로 선형과 비선형 Muskingum-Cunge법에 의한 단위폭 사면에서의 유출수문곡선의 특성을 비교·고찰하였다. 유출곡선은 선형법에서는 확산효과에 의해서 거의 대칭적으로 확산되나, 비선형법에서는 비선형효과와 확산효과의 상호작용을 의하여 상승부는 급하게 되고, 하강부는 완만하게 된다. 선형법은 유입된 질량을 정확히 보존하나, 비선형법은 질량의 증가나 손실을 초래한다. 비선형법에서 기저유량이 작고 유량변화의 비가 큰 경우, 완경사에서는 파형의 감쇠와 질량의 감소를 가져오나, 급경사에서는 kinematic shock의 생성과 함께 질량의 증가를 가져온다. 같은 특성을 갖는 사면의 경우, 유출곡선의 전파속도와 파형의 변화는 선형법에서는 단위폭당 기준유량에 좌우되나, 비선형법에서는 기저유량 및 유량 변화의 비(= 첨두유량/기저유량)에 좌우된다. 횡유입(강우)이 있는 비선형법의 경우 횡유입이 없는 경우와 마찬가지로, 사면경사가 완만하고 유량변화의 비가 클수록 첨두유량은 작아지고 파형은 확산되나, 질량의 손실은 거의 없다.

• 한국항해항만학회지
• /
• 제33권9호
• /
• pp.629-634
• /
• 2009

Vessels stability problems need to resolve the nonlinear mathematical models of rolling motion. For nonlinear systems subjected to random excitations, there are very few special cases can obtain the exact solutions. In this paper, the specific differential equations of rolling motion for intact ship considering the restoring and damping moment have researched firstly. Then the partial stochastic linearization method is applied to study the response statistics of nonlinear ship rolling motion in beam seas. The ship rolling nonlinear stochastic differential equation is then solved approximately by keeping the equivalent damping coefficient as a parameter and nonlinear response of the ship is determined in the frequency domain by a linear analysis method finally.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 추계학술대회
• /
• pp.239-240
• /
• 2009

Vessels stability problems need to resolve the nonlinear mathematical models of rolling motion. For nonlinear systems subjected to random excitations, there are very few special cases can obtain the exact solutions. In this paper, the specific differential equations of rolling motion for intact ship considering the restoring and damping moment have researched firstly. Then the partial stochastic linearization method is applied to study the response statistics of nonlinear ship rolling motion in beam seas. The ship rolling nonlinear stochastic differential equation is then solved approximately by keeping the equivalent damping coefficient as a parameter and nonlinear response of the ship is determined in the frequency domain by a linear analysis method finally.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.422-429
• /
• 2003

A comparative study was performed for a suspension bridge to grasp the possible differences in seismic responses evaluated by several analytical methods. The items mainly investigated are the linear vs. nonlinear response the response spectrum method vs. the linear dynamic analysis method and the damping ratio and it's implementation into analysis procedures. According to the numerical example, it is found that the seismic responses are considerably affected by the damping-related parameters even though slight differences are shown depending on the response quantities md the exciting directions. On the other hand, it is also confirmed that the seismic responses are less affected by the analysis method-related parameters such as the response spectrum method vs. the linear dynamic analysis method, and the linear and nonlinear analysis method. The response spectrum method is expected to give conservative results for the examined bridge, provided that the design response spectrum in the Korean Highway Design Specification is modified according to the proper damping ratio.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.368-373
• /
• 2008

This paper describes the dynamic shock effects on the pretensioned concrete member by the detensioning using finite element analysis. The investigation was performed by linear and nonlinear dynamic analysis. In nonlinear dynamic analysis, Brittle Cracking Model was applied for concrete behavior. It was shown that the amplitude of stress wave was significantly decreased when time for cutting of tendon was above 0.05sec. The maximum stress values obtained from linear and nonlinear dynamic analysis was nearly same. However, the position forthe maximum tensile stresses were different.

• Structural Engineering and Mechanics
• /
• 제66권5호
• /
• pp.621-629
• /
• 2018

By employing the nonlocal continuum field theory of Eringen and Von Karman nonlinear strains, this paper presents an analytical model for linear and nonlinear dynamics analysis of single-walled carbon nanotubes (SWNTs) conveying fluid with different boundary conditions. In the linear analysis the natural frequencies and critical flow velocities of SWNTs are computed. However, in the nonlinear analysis the effect of nonlocal parameter on nonlinear dynamics of cantilevered SWNTs conveying fluid is investigated by using bifurcation diagram, phase plane and Poincare map. Numerical results confirm existence of chaos as well as a period-doubling transition to chaos.

• Structural Engineering and Mechanics
• /
• 제66권1호
• /
• pp.27-36
• /
• 2018

The objective of this work is to analyze geometrically nonlinear static analysis a simply supported laminated composite beam subjected to a non-follower transversal point load at the midpoint of the beam. In the nonlinear model of the laminated beam, total Lagrangian finite element model of is used in conjunction with the Timoshenko beam theory. The considered non-linear problem is solved considering full geometric non-linearity by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. There is no restriction on the magnitudes of deflections and rotations in contradistinction to von-Karman strain displacement relations of the beam. In the numerical results, the effects of the fiber orientation angles and the stacking sequence of laminates on the nonlinear deflections and stresses of the composite laminated beam are examined and discussed. Convergence study is performed. Also, the difference between the geometrically linear and nonlinear analysis of laminated beam is investigated in detail.

• 한국안전학회지
• /
• 제26권1호
• /
• pp.36-42
• /
• 2011

This paper presents a nonlinear soil-structure interaction analysis approach, which can consider precisely characteristics of structures, complicated soil profiles and nonlinear characteristics of soil. Although many methods have been developed to deal with the soil-structure interaction effects in past years, most of them are nearly unpractical since it is difficult to model complicated characteristics of structure and soil precisely. The presented approach overcomes the difficulties by adopting an maligned mesh generation approach and multi-linear model. The applicability of the proposed approach is validated and the effects of complicated characteristics of structure and soil on soil-structure interaction are investigated through the numerical example by the proposed nonlinear soil-structure interaction analysis approach.

• Smart Structures and Systems
• /
• 제16권1호
• /
• pp.81-100
• /
• 2015

This paper presents nonlinear analysis of an arbitrary functionally graded circular plate integrated with two functionally graded piezoelectric layers resting on the Winkler-Pasternak foundation. Geometric nonlinearity is considered in the strain-displacement relation based on the Von-Karman assumption. All the mechanical and electrical properties except Poisson's ratio can vary continuously along the thickness of the plate based on a power function. Electric potential is assumed as a quadratic function along the thickness direction. After derivation of general nonlinear equations, as an instance, numerical results of a functionally graded material integrated with functionally graded piezoelectric material obeying two different functionalities is investigated. The effect of different parameters such as parameters of foundation, non homogenous index and boundary conditions can be investigated on the mechanical and electrical results of the system. A comprehensive comparison between linear and nonlinear responses of the system presents necessity of this study. Furthermore, the obtained results can be validated by using previous linear and nonlinear analyses after removing the effect of foundation.