• 한국콘텐츠학회논문지
• /
• 제13권11호
• /
• pp.523-532
• /
• 2013

3차원 공간에서 물체를 재구성하기 위하여 제안된 기존 기법들은 여러 개의 카메라를 사용하거나 여러장의 사진을 촬영하여 물체를 재구성하기 때문에 특정한 하드웨어를 필요로 하거나 촬영 장소에 민감하고 시간이 오래 걸린다는 단점이 있다. 본 논문에서는 유비쿼터스 환경에서 구조광 기법을 이용하여 한 장의 사진의 정보로부터 3차원 물체를 재구성하는 방법을 제안한다. 구조광 기법 적용을 위한 칼라 패턴은 기존연구에서 제안된 것을 사용한다. 본 논문에서는 실제로 객체 재구성 성능에 매우 중요한 줄무늬 패턴 추출과 줄무늬 패턴 매칭에 다양한 영상 처리 기법들로 구성된 파이프라인을 새롭게 제안하고, 패턴 매칭을 위한 최적의 비용 함수를 제안한다. 제안 기법을 통하여 갤럭시 빔과 같은 초소형 프로젝터를 탑재한 스마트폰과 같은 유비쿼터스 혹은 모바일 환경에서 적은 계산 복잡도와 간단한 환경 설정으로 3차원 물체를 재구성하는 것이 가능하다.

• Archives of Plastic Surgery
• /
• 제50권3호
• /
• pp.279-287
• /
• 2023

Background Hypothenar free flaps (HTFFs) have been widely used for reconstructing palmar defects. Although previous anatomical and clinical studies of HTFF have been conducted, this technique still has some limitations. In this study, we describe some tips for large flap design that allows for easy harvesting of HTFFs with minimal donor site morbidity. Methods A total of 14 HTFF for hand defect reconstruction were recorded. The oblique flap was designed in the proximal HT area following relaxed skin tension line along the axis between fourth web space and 10 mm ulnar side of pisiform. A flap pedicle includes one or two perforators with ulnar digital artery and HT branch of basilic vein. In addition, innervated HTFF can be harvested with a branch of ulnar digital nerve. Electronic medical records were reviewed to obtain data on patients' information, operative details, and follow-up period. In addition, surgical outcome score was obtained from the patient, up to 10 points, at the last follow-up. Results Mean harvest time was 46 minutes, and two perforators were included in 10 cases. The mean flap area was 10.84 cm². There were no problems such as donor site depression, scar contracture, keloids, wound dehiscence, numbness or neuroma pain at donor sites, and hypersensitivity or cold intolerance at flap site, either functionally or aesthetically. Conclusion Palmar defect reconstruction is challenging for hand surgeons. However, large HTFF can be harvested without complications using the oblique axis HTFF technique. We believe our surgical tips increase utility of HTFF for palmar defect reconstruction.

• 대한족부족관절학회지
• /
• 제13권2호
• /
• pp.193-196
• /
• 2009

The first metatarsophalangeal joint injury is common in professional soldiers and athletes. But this was rarely reported. A professional soldier has varus instability in the first metatarsophalangeal joint due to hyperextension. In the MR Imaging, weavy appearance in lateral collateral ligament and high signal change in plantar plate was shown. So he has surgical treatment using reconstructive procedure. At first, $4^{th}$ extensor digitorum longus tendon was splitted longitudinally and harvested, second triangular shape reconstruction on lateral joint line was done using harvested tendon. One year later, fifteen degrees was limited compared with intact side. Reconstruction using $4^{th}$ extensor digitorum longus tendon in traumatic dynamic hallux varus was good method.

• Journal of Computational Design and Engineering
• /
• 제3권1호
• /
• pp.14-23
• /
• 2016

The problem of fitting B-spline curves to planar point clouds is studied in this paper. A novel method is proposed to deal with the most challenging case where multiple intersecting curves or curves with self-intersection are necessary for shape representation. A method based on Delauney Triangulation of data points is developed to identify connected components which is also capable of removing outliers. A skeleton representation is utilized to represent the topological structure which is further used to create a weighted graph for deciding the merging of curve segments. Different to existing approaches which utilize local shape information near intersections, our method considers shape characteristics of curve segments in a larger scope and is thus capable of giving more satisfactory results. By fitting each group of data points with a B-spline curve, we solve the problems of curve structure reconstruction from point clouds, as well as the vectorization of simple line drawing images by drawing lines reconstruction.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1634-1637
• /
• 2003

Any given object on the motor-driven turntable is pictured from 8 to 72 different views with a digital camera. 3D shape reconstruction is performed with the integrated software called by Scanware from these multiple digital photographs. There are several steps such as configuration, calibration, capturing, segmentation, shape creation, texturing and merging process during the shape reconstruction process. 3D geometry data can be exported to cad data such as Autocad input file. Also 3D image model is generated from 3D geometry and texture data, and is used to advertise the model in the internet environment. Consumers can see the object realistically from wanted views by rotating or zooming in the internet browsers with Scanbull spx plug-in. The spx format allows a compact saving of 3D objects to handle or download. There are many types of scan equipments such as laser scanners and photogrammetric scanners. Line or point scan methods by laser can generate precise 3D geometry but cannot obtain color textures in general. Reversely, 3D image modeling with photogrammetry can generate not only geometries but also textures from associated polygons. We got various 3D image models and introduced the process of getting 3D image model of an internet-connected watchdog robot.

• Archives of Plastic Surgery
• /
• 제36권6호
• /
• pp.811-813
• /
• 2009

Purpose: Congenital cleft earlobe is relatively rare malformation and defective type congenital cleft earlobes are reconstructed with mainly local flap methods rather than primary closure or z - plasty. Various methods are introduced but many of these remain visible scars or require complex operative techniques. We designed a new and simple method of reconstruction for defective type cleft earlobe. Methods: On the posterior surface of the auricle and mastoid area, S - shaped line was drawn continuously. One arc is for turnover hinge flap to make the anterolateral surface of the earlobe, and the other is for transposition flap to reconstruct the posterolateral surface. The donor site of the transposition flap was closed primarily. Results: Four patients were operated by S - shaped flap design method. They were all female and two were right side and others were left. We obtained aesthetically satisfactory postoperative results with inconspicuous scars at the posterior side of the auricle. In one case, minor revision was performed because of insufficient blood supply of the hinge flap. Conclusion: We can reconstruct defective type cleft earlobe with new, simple S - shaped design for hinge flap and transposition flap.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.630-635
• /
• 2012

Nearfield acoustic holography method predicts an unmeasured sound field, therefore it depends on its prediction methods. In particular, if one has radiators or scatters, which cannot be expressed by simple geometry, then inverse boundary element method (BEM) is normally employed to reconstruct the sound field induced by sound sources with irregular profiles. The characteristics of boundary element, including the element shape, characteristic length, order of shape function and others, affect the reconstruction error. Investigating the errors by means of changing these factors will provide a guide line for selecting appropriate factors, associated with the elements of BEM. These factors are investigated by numerical simulations, and the accuracies with respect to the variant factors are compared. Novel suggestions for selecting appropriate boundary element factors are described based on the simulation results.

• 한국가시화정보학회지
• /
• 제3권1호
• /
• pp.63-70
• /
• 2005

Optical Line Patternator(OLP) has been applied to get a distribution of the spray at high ambient pressure. OLP is a combined technique of extinction measurement and image processing. The attenuated intensity of laser beam after traversing spray region was measured by using a photo-detector, and the line image of Mie-scattering was captured simultaneously in the path of each laser beam by using a CCD camera. The distribution of extinction coefficient in the spray is obtained by processing these data with the algebraic reconstruction technique. From the distribution of extinction coefficient, the surface distribution of spray can be reconstructed. OLP does not use laser sheet but use laser beam so that the noise effect of multiple scattering, caused by increasing number density of droplet in high pressure environment, is reduced drastically. OLP is expected as a suitable method which can investigate the characteristics of relatively large spray under the high pressure environment such as liquid rocket engine.

• 대한전자공학회논문지SP
• /
• 제44권2호
• /
• pp.144-152
• /
• 2007

본 논문에서는 멀티 레이저 라인 조사 방법을 이용한 능동적 비젼(Active Vision)의 방법으로 비등속 이동물체의 표면을 효율적으로 모델링 하는 방법을 제안한다. 레이저 라인을 물체에 조사하고 레이저가 조사된 방향과 각도를 달리한 방향에서 이를 관찰하면 레이저 라인이 표면의 굴곡에 따라 휘어지는 현상을 관찰할 수 있다. 이를 삼각기법(triangulation method)을 이용하여 분석하면 물체의 표면 3차원 정보 획득이 가능하다. 기존에 대표적 구조화 조명기법인 단일 라인(single stripe) 기법과 단일 프레임(single frame) 기법의 장단점과 제안하는 멀티 라인 기법의 장점을 설명하고 정밀도를 높이기 위한 레이저 라인의 효율적 배치에 대하여 설명한다. 강인한 레이저 라인의 추출을 위하여, 레이저 라인 피크 검출기법과 색 분석을 통해 얻은 레이저 반응도를 함께 이용하는 방법을 소개하였고, 효과적인 레이저 라인의 라벨링 기법을 새로 제안하였다. 개별 3차원 복원 표면을 전체영상으로 표현하기 위하여 동기화 정보 획득에 영상 간 특징점 매칭을 활용한 영상 정합 기법을 접목하였다. 3차원 표면 모델링 기술을 최종적으로 컨테이너 표면 데미지 검사에 활용하여 제안 3D 모델링 기술의 우수성을 확인하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.182-185
• /
• 2005

Satellite cameras are calibrated before launch in detail and in general, but it cannot be guaranteed that the geometry is not changing during launch and caused by thermal influence of the sun in the orbit. Modem satellite imaging systems are based on CCD-line sensors. Because of the required high sampling rate the length of used CCD-lines is limited. For reaching a sufficient swath width, some CCD-lines are combined to a longer virtual CCD-line. The images generated by the individual CCD-lines do overlap slightly and so they can be shifted in x- and y-direction in relation to a chosen reference image just based on tie points. For the alignment and difference in scale, control points are required. The resulting virtual image has only negligible errors in areas with very large difference in height caused by the difference in the location of the projection centers. Color images can be related to the joint panchromatic scenes just based on tie points. Pan-sharpened images may show only small color shifts in very mountainous areas and for moving objects. The direct sensor orientation has to be calibrated based on control points. Discrepancies in horizontal shift can only be separated from attitude discrepancies with a good three-dimensional control point distribution. For such a calibration a program based on geometric reconstruction of the sensor orientation is required. The approximations by 3D-affine transformation or direct linear transformation (DL n cannot be used. These methods do have also disadvantages for standard sensor orientation. The image orientation by geometric reconstruction can be improved by self calibration with additional parameters for the analysis and compensation of remaining systematic effects for example caused by a not linear CCD-line. The determined sensor geometry can be used for the generation? of rational polynomial coefficients, describing the sensor geometry by relations of polynomials of the ground coordinates X, Y and Z.