• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.351-358
• /
• 2002

To determine a scattering performance of a rectangular waveguide with two skewed conducting posts in approximation by the mode matching method and the generalized scattering method is presented in this paper. We determined the optimized result from effective analysis to select the adequate eigenmode number in mode matching method for the skewed two conducting posts. And we obtained the scattering performance of the junction of the waveguide to coaxial line with two skewed conducting posts by application of above method. By this result, it can be seen that the transmission performance at output port of waveguide to coaxial line is 3 ㏈ at the angle, 50°And we obtained the reflection performance to decrease linearly along the skewed angle at input port.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.85-91
• /
• 2015

We investigated the structure of inductive coupler and its magnetic coupling to increase the transmission coefficient for power line communication. A Rogowski coil, which is an air-cored inductive coupler, and a magnetic cored coupler were fabricated to analyze the transmission coefficient for different coupler parameters. This paper proposes the impedance matching method using lumped elements and an impedance transformer to increase the transmission coefficient. In the experiment, the transmission coefficient of the proposed system was increased in both narrowband and broadband cases, and a trade-off between the transmission coefficient and the bandwidth was shown. This method will be useful for the further study of impedance matching with the load variation.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1760-1762
• /
• 2002

In this work we develop an equivalent circuit model of TCP(transformer coupled plasma) source and investigate matching characteristic. The developed circuit model includes transmission line, standard-type impedance matching network and displacement current in the plasma source. The impedance of TCP is calculated by previously developed program for various source parameters and dependance of components of matching impedance on the value of source impedance is investigated.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.587-589
• /
• 1995

The safe navigation of a mobile robot requires the recognition of the environment in terms of vision processing. To be guided in the given path, the robot should acquire the information about where the wall and corridor are located. Also unexpected obstacles should be detected as rapid as possible for the safe obstacle avoidance. In the paper, we assume that the mobile robot should be navigated in the flat surface. In terms of this assumption we simplify the correspondence problem by the free navigation surface and matching features in that coordinate system. Basically, the vision processing system adopts line segment of edge as the feature. The extracted line segments of edge out of both image are matched in the free nevigation surface. According to the matching result, each line segment is labeled by the attributes regarding obstacle and free surface and the 3D shape of obstacle is interpreted. This proposed vision processing method is verified in terms of various simulations and experimentation using real images.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.1
• /
• pp.40-44
• /
• 2006

In this paper, the distortion characteristics of an electrical pulse which has a rise/fall time due to the dispersion and the reflection, on nonuniform tapered microstrip lines has investigated in time domain. The transmission characteristics on uniform microstrip lines in time domain had represented already, but the results for the nonuniform tapered microstrip lines not represented yet. We investigated the transmission characteristics for pulse signal on the nonuniform tapered microstrip lines, and the result applied to design of wide band impedance matching circuit in design of MMIC. The voltage and current transfer functions are shown for the tapered line. The dispersion and distortion obtained by using these transfer functions are represented for the nonideal square pulse.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.7-14
• /
• 2008

In this paper, we propose VATL(Voltage-controlled Artificial Transmission Line) employing periodically loaded diodes for application to on-chip matching components on MMIC. Compared with conventional microstrip line, the VATL showed a much shorter wave length due to periodic capacitance of diodes, and the characteristic impedance of the VATL was easily controlled bγ changing supplied voltage. Concretely, the characteristic impedance of the VATL was changed from $80{\sim}20{\Omega}$ in a range of $0{\sim}1.05V$ and the VATL showed a wavelength of 1.5mm at 20GHz, while conventional microstrip line showed a wavelength of 5.3mm at the same frequency. Using the VATL, a ${\lambda}/4$ impedance transformer was fabricated on GaAs MMIC for application to on-chip matching components on MMIC. Using the ${\lambda}/4$ impedance transformer made it possible to perform impedance matching between RF components with various characteristic impedance of $30{\sim}100{\Omega}$ by adjusting applied Voltage.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.182-187
• /
• 1999

Stereo matching is one of the most crucial parts in DEM generation. Naive stereo matching algorithms often create many holes and blunders in a DEM and therefore a carefully designed strategy must be employed to guide stereo matching algorithms to produce “good” 3D information. In this paper, we describe one such a strategy designed by the use of scene geometry, in particular, the epipolarity for generation of a DEM from linear pushbroom images. The epipolarity for perspective images is a well-known property, i.e., in a stereo image pair, a point in the reference image will map to a line in the search image uniquely defined by sensor models of the image pair. This concept has been utilized in stereo matching by applying epipolar resampling prior to matching. However, the epipolar matching for linear pushbroom images is rather complicated. It was found that the epipolarity can only be described by a Hyperbola- shaped curve and that epipolar resampling cannot be applied to linear pushbroom images. Instead, we have developed an algorithm of incorporating such epipolarity directly in least squares correlation matching. Experiments showed that this approach could improve the quality of a DEM.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.3
• /
• pp.461-469
• /
• 2001

Existing area-based stereo algorithms rely heavily on rectangular windows for computing correspondence. While the algorithms with the rectangular windows are efficient, they generate relatively large matching errors due to variations of disparity profiles near depth discontinuities and doesnt take into account local deformations of the windows due to projective distortion. In this paper, in order to deal with these problems, a new correlation function with 4 directional line masks, based on robust estimator, is proposed for the selection of potential matching points. These points is selected to consider depth discontinuities and reduce effects on outliers. The proposed matching method finds an arbitrarily-shaped variable window around a pixel in the 3d array which is constructed with the selected matching points. In addition, the method take into account the local deformation of the variable window with a constant disparity, and perform the estimation of sub-pixel disparities. Experiments with various synthetic images show that the proposed technique significantly reduces matching errors both in the vicinity of depth discontinuities and in continuously smooth areas, and also does not be affected drastically due to outlier and noise.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.2 s.29
• /
• pp.61-66
• /
• 2004

By the advent of the high-resolution Satellite imagery, there are increasing needs in image mosaicking technology which can be applied to various application fields such as GIS(Geographic Information system). To mosaic images, various methods such as image matching and histogram modification are needed. In this study, automated image mosaicking is performed using image matching method based on the multi-resolution wavelet analysis(MWA). Specifically, both area based and feature based matching method are embedded in the multi-resolution wavelet analysis to construct seam line.; seam points are extracted then polygon clipping method are applied to define overlapped area of two adjoining images. Before mosaicking, radiometric correction is proceeded by using histogram matching method. As a result, mosaicking area is automatically extracted by using polygon clipping method. Also, seamless image is acquired using multi-resolution wavelet analysis.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.4
• /
• pp.116-129
• /
• 1993

This paper proposes an on-line Recognition scheme of cursive Korean characters based on the DP matching and fuzzy concept. The proposed algorithm, invariant to rotation and size, reduces greatly the computational requirement of dynamic programming by matching phonemes rather than character patterns, where the angle difference and the ration of lengths between input and reference patterns are adopted as matching features. The correct matching of poorly written cursive characters becomes possible by introducing the fuzzy concept in representing the features of phonemes and the ralative position between adjacent phonemes. Computer simulation results are observed to show the effectiveness of the proposed algorithm.