• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1308-1312
• /
• 2004

Transmission line impedance calculation has been tried for obtaining exact value. The method proposed by Carson contains indefinite complex integral. Although the Carson solution is proposed with power series, the solution is limited and valid at special range of frequency. In this paper, we proposed a simplified Carson solution by analytical method using ground transmission line return current. This method calculate the transmission line impedance easily.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1325-1333
• /
• 2001

Critical defects in pressure vessels and pipes are generally found in the form of a semi-elliptical surface crack, and the analysis of which is consequently an important problem in engineering fracture mechanics. Furthermore, in addition to the traditional single parameter K or J-integral, the second parameter like T-stress should be measured to quantify the constraint effect. In this work, the validity of the line-spring finite element is investigated by comparing line-spring J-T solutions to the reference 3D finite element J-T solutions. A full 3D-mesh generating program for semi-elliptical surface cracks is employed to provide such reference 3D solutions. Then some structural characteristics of the surface-cracked T and L-joints are studied by mixed mode line-spring finite element. Negative T-stresses observed in T and L-joints indicate the necessity of J-T two parameter approach for analyses of surface-cracked T and L-joints.

• Journal of applied mathematics & informatics
• /
• 제8권2호
• /
• pp.491-503
• /
• 2001

In this paper we show that solution set of certain Volterra inclusions on the half line is a continuum.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1387-1395
• /
• 2016

A method for the identification of mechanical parameters based on integral calculation is presented. Both the moment of inertia and the friction constant are identified by the method developed here, which is based on well-known mechanical differential equations. The mechanical system under test is excited according to a pre-determined low-frequency sinusoidal motion, minimizing the distortion, and increasing the accuracy of the results. The parameters are identified using integral calculation, increasing the robustness of the results against measurement noise. Experimental data are supported by simulation, confirming the effectiveness of the proposed technique. The performance improvements shown here are of use in the design of speed and position controllers and observers. Owing to its simplicity, this method can be readily applied to commercial inverter products.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 봄 학술발표회 논문집
• /
• pp.62-69
• /
• 1996

In this study, an equivalent domain integral (EDI) method is presented to estimate the track-till integral parameter, J-value, for two dimensional cracked elastic bodies which may quantify the severity of the crack-tit) stress fields. The conventional J-integral method based on line integral has been converted to equivalent area or domain integrals by using the divergence theorem. It is noted that the EDI method is very attractive because all the quantities necessary for computation of the domain integrals are readily available in a finite element analysis. The details and its implementation are extened to both h-version finite element model with 8-node isoparametric element and p-version finite element model with high order hierarchic element using Legendre type shape fuctions. The variations with respect to the different path of domain integrals from the crack-tip front and the choice of 5-function have been tested by several examples.

• 한국항행학회논문지
• /
• 제7권2호
• /
• pp.180-190
• /
• 2003

실수축 상의 적분 방법에 의한 정확한 closed-form 그린함수를 이용하여 코플래너 도파로의 불연속에 대한 공간영역 full-wave 해석을 하였다. MPIE(Mixed Potential Integral Equation)를 풀기 위한 수치계산 방법으로는 삼각형 요소를 이용한 갤러킨 방법을 사용하였다. 경계면에서 삼각형 요소상의 기저함수로는 선형함수를 사용하였으며, 관측점과 전원점이 일치하는 특이점 근방의 적분 계산을 위해 면적분을 선적분 형태로 바꾸어 피적분 함수의 특이점이 사라지도록 하는 해석적인 방법을 사용하였다. 실수축 적분방법에 의한 그린함수를 이용함으로써 불연속에 대한 정확한 특성을 구하였다.

• 천문학논총
• /
• 제26권1호
• /
• pp.25-35
• /
• 2011

A diagnostic tool has been proposed to convert the observed surface distribution of hydrogen recombination line intensities into the radial distributions of the electron temperature and the density in HII regions. The observed line intensity is given by an integral of the volume emission coefficient along the line of sight, which comprises the Abel type integral equation for the volume emission coefficient. As the emission coefficient at a position is determined by the temperature and density of electrons at the position, the local emission coefficient resulted from the solution of the Abel equation gives the radial distribution of the temperature and the density. A test has been done on the feasibility of our diagnostic approach to probing of HII regions. From model calculations of an HII region of pure hydrogen, we have theoretically generated the observed surface brightness of hydrogen recombination line intensities and analyzed them by our diagnostic tool. The resulting temperatures and densities are then compared with the model values. For this case of uniform density, errors in the derived density are not large at all the positions. For the electron temperature, however, the largest errors appear at the central part of the HII region. The errors in the derived temperature decrease with the radial distance, and become negligible in the outer part of the model HII region.

• Communications for Statistical Applications and Methods
• /
• 제17권1호
• /
• pp.47-54
• /
• 2010

By using the white noise theory for fractional Brownian sheet, we give new representations of the Wick integrals of various types with respect to fractional Brownian sheet with Hurst parameters $H_1,H_2{\in}$(0, 1).

• 대한수학회지
• /
• 제37권4호
• /
• pp.545-563
• /
• 2000

An integral transform with the Bessel function Jv(z) in the kernel is considered. The transform is relatd to a singular Sturm-Liouville problem on a half line. This relation yields a Plancherel's theorem for the transform. A Paley-Wiener-type theorem for the transform is also derived.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.398-400
• /
• 1987

Using the transmission line model, we have developed a formalism which is fairly accurate and convenient for analyzing the dispersion characteristics of rectangular dielectric waveguides for integrated optics. The fields in open half space regions are expressed as a Fourier integral form. Including all the TE and TM polarized discrete modes in slab waveguide region, our calculation shows that the discrepancies between the previous vectorial wave analysis using one discrete mode and the brute-force numerical analysis for the rectangular dielectric waveguides can be fully reduced with this method.