• Geomechanics and Engineering
• /
• 제22권5호
• /
• pp.433-439
• /
• 2020

Tunnels are one of the most important constructions in civil engineering. The damage to these structures caused enormous costs. Therefore, the safe and economic design of these structures has long been considered. However, both applied loads on the tunnels as well as the resistance of the structural members are naturally uncertain parameters, hence, the design of these structures requires considering the probabilistic approaches. This study aims to determine the load and resistant factors of lining tunnels concerning the earthquake extreme events limit state function. For this purpose, tunnels that have been designed according to the previous design codes (AASHTO Tunnel LRFD 2017) and using reliability analysis, the optimum reliability of these structures for different loading scenarios is determined. In this paper, the tunnel is considered circular. Finally, the proper load and resistance factors are calculated corresponding to the obtained target reliability. Based on the performed calibration earthquake extreme events limit state function, the result of this study can be recommended to AASHTO Tunnel LRFD 2017.

• 한국학교수학회논문집
• /
• 제26권2호
• /
• pp.87-110
• /
• 2023

이 연구에서는 반복읽기와 소리내어 읽기를 결합한 소리내어 반복읽기를 수학과 교수·학습 방법으로 제안하고, 소리내어 반복읽기가 학생의 학업성취도와 인지부하에 미치는 영향을 살펴보고자 하였다. 또한 수학과 교수·학습 방법으로서 소리내어 반복읽기에 대한 시사점을 탐색해 보고자 하였다. 이를 위하여 중학교 3학년 학생 4명과 고등학교 1학년 학생 4명을 대상으로 '함수의 극한' 단원과 '경우의 수/순열' 단원에 대해 소리내어 반복읽기를 실시하고 학업성취도와 인지부하가 어떻게 변하는지 분석하는 사례 연구를 진행하였다. 그 결과, 연구에 참여한 모든 학생들은 소리내어 반복읽기가 누적됨에 따라 학업성취도와 인지부하에서 긍정적인 변화를 보였다. 단원별로 비교했을 때, 경우의 수/순열 단원에 비해 함수의 극한 단원의 학업성취도가 낮았으며 인지부하 측면에서도 함수의 극한 단원에서 학생들이 더 높은 인지부하를 드러냈다. 학년별로 비교했을 때, 인지부하에서는 큰 차이가 없었으나 두 단원 모두 고등학교 1학년 학생 4명의 학업성취도가 중학교 3학년 학생 4명에 비해 높았다. 학년별 학업성취도는 특히 함수의 극한 단원에서 큰 차이가 있었지만 그 격차는 소리내어 반복읽기를 진행할수록 줄어들었다.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1656-1663
• /
• 2016

A capacitive wireless power transfer (C-WPT) system uses an electric field to transmit power through a physical isolation barrier which forms a pair of ac link capacitors between the metal plates. However, the physical dimension and low dielectric constant of the interface medium severely limit the effective link capacitance to a level comparable to the main switch output capacitance of the transmitting circuit, which thus narrows the soft-switching range in the light load condition. Moreover, by fundamental limit analysis, it can be proved that such a low link capacitance increases operating frequency and capacitor voltage stress in the full load condition. In order to handle these problems, this paper investigates optimal design of double matching transformer networks for C-WPT. Using mathematical analysis with fundamental harmonic approximation, a design guideline is presented to avoid unnecessarily high frequency operation, to suppress the voltage stress on the link capacitors, and to achieve wide ZVS range even with low link capacitance. Simulation and hardware implementation are performed on a 5-W prototype system equipped with a 256-pF link capacitance and a 200-pF switch output capacitance. Results show that the proposed scheme ensures zero-voltage-switching from full load to 10% load, and the switching frequency and the link capacitor voltage stress are kept below 250 kHz and 452 V, respectively, in the full load condition.

• 한국강구조학회 논문집
• /
• 제9권1호통권30호
• /
• pp.51-63
• /
• 1997

Highly curved steel-box bridges are usually constructed as ramp structures for the highway interchange and metropolitan elevated highway junction, but a number of these bridges are deteriorated and damaged to a significant degree due to heavy traffic. The main objective of the study is to develop a practical reliability-based assessment of safety and residual load carrying-capacity of existing curved steel-box ramp bridges. In the paper, for the realistic assessment of safety and residual load carrying-capacity of deteriorated and/or damaged curved steel-box bridges, an interactive non-linear limit state model is formulated based on the von Mises's combined stress yield criterion. It is demonstrated that the proposed model is effective for the assessment of reliability-based safety and the evaluation of residual load carrying-capacity of curved steel-box bridges. In addition, this study comparatively shows the applicability of various reliability analysis methods, and suggests a practical and effective one to be used in practice.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1287-1294
• /
• 2006

A pile is compressed with settlements when loading and bearing capacity is altered along relative displacement of pile/soil on settlement and compression. Settlements of pile displaying limit skin friction is different from displaying tip resistance. Therefore, it is an error in traditional method that bearing capacity of pile is estimated from the sum of limit skin fraction and tip resistance. Accordingly, development of design method considering behavior of load-settlement is needed. In this study, we would like to establish the base for development of design method considering bearing capacity altering along displacement on settlement and compression. For this, we established system and substance of design method. And in order to establish relationship of load-settlement of pile on the type of soil, we analyzed and arranged existing database and pile loading test. On design method, settlement is assumed gradually on each capacity level being assumed gradually. Bearing capacity developing on the pile is obtained on each settlement level. Until the obtained bearing capacity will be equal to assumed capacity, this process is continued with increasing settlement. Load-settlement curve for soil classification is sketched in the process computing settlement on assumed capacity. This design method will be materialized by computation program.

• 기술발표회
• /
• 통권2006호
• /
• pp.135-145
• /
• 2006

Soil nailing systems are generally many used in underground excavations and reinforcements of slopes since the first construction as a temporary retaining wall in 1993, Korea. In recently, they are many attempts to expand the permanent reinforcements of slopes However, experimental studies related to soil nailing systems are insufficient Specially, there are no researches related in the large scaled load tests of soil nailed walls in Korea In this study, a case study on the large scaled load tests of soil nailed walls is introduced and the behavior characteristic of them is investigated Also, they are proposed allowable deformation corresponding to the serviceability limit of soil nail walls and ultimate deformation corresponding to the collapse state of the walls. These results can be applied to the maintenance management of soil nailed walls And analysis on the required minimum factor of safety of soil nailed walls using the relation curve of load ratio and deformation ratio are carried out

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.488-490
• /
• 2003

This paprer presents the evlauation method for transmission marginal loss factors(MLFs) considering the electrical distance. Generally, MLFs are represented as the sensitivity of transmission losses, which is computed from the change of generation by the change of the load. MLFs are classified as load-focused MLFs and generator-focused MLFs. The existing evaluation method for generator focused MLFs has the limit not reflecting the characteristic of power systems since the method has been introduced the assumption which the output of a generator is supplied to all of the load buses on the power system. Therefore, to overcome the limit of evaluation method for generator-focused MLFs, we have applied the process, which it approximately can find the load buses that supplied a generator to the method. We have applied the proposed method to the simple 5-bus system because the proposed method is not analytic but the hybrid method incorporated the Kirschen and Bialek's algorithm to the existing analytic method to find the load buses supplied by a generator.

• 소성∙가공
• /
• 제12권3호
• /
• pp.228-235
• /
• 2003

In this paper, the workability of flange in the radial extrusion is analyzed in terms of the deformation pattern, the punch load and the forming limit by using simulation and experiment. A single action pressing is applied to both simulation and experiment. The analysis in this study is focused on the transient extrusion into the gap in radial direction with various gap heights and die corner radius. Based on the surface strains where surface cracking occurs, the forming patterns and strain-fracture relationships in producing radially extruded flange are obtained.

• 대한교통학회지
• /
• 제20권2호
• /
• pp.17-26
• /
• 2002

본 연구에서는 직선도로와 일반도로 구간을 운전하는 운전자의 각성변화비교와 적정한 도로의 직선길이를 알아보기 위하여 10명의 피실험자를 대상으로 실제 운전 중에 운전자의 좌우측 전두엽과 후두염의 뇌파를 측정하였다. 수집된 Data를 FFT(Fast Fourier Transform)분석에 대해 상대 파워스펙트럼 값을 구하였으며 $\beta$파의 값을 중심으로 분석하였다. 본 연구에서 얻은 결과를 요약하면 다음과 같다. 첫째 운전자의 각성수준 치를 측정하여 새로운 최대 허용 직선길이 기준정립에 활용가능한 방법론을 제시하였다. 둘째 직선구간을 주행하는 경우 일반구간 주행보다 각성정도가 낮은 것으로 나타났다 특히, 운전 중 운전자의 각성을 가장 잘 설명하는 것으로 알려진 후두염에서는 현저한 각성의 감소가 일어났다. 일반구간은 0.821, 직선구간은 2.219로 직선구간에서 약 3배정도의 각성치가 낮아져서 운전자의 운전능력이 현저하게 떨어지는 것으로 평가되었다. 셋째, 운전자 각성수준은 직선도로 진입 후 4.2km지점에 0.428로 나타나 통계적으로 유의한 수준으로 각성이 크게 감소되었으나 3.6km가지는 운전자의 각성수준이 유의한 수준으로 감소하지 않고 있다. 넷째 따라서 20~30대 남성을 대상으로 한 실험조건에서 직선구간의 최장 허용 길이를 기존의 설계속도의 20배로 규정한 2.0km 값보다는 설계속도의 30배인 3.0km로 완화하여도 운전자의 운전능력에 부정적인 영향이 없을 것으로 판단되었다.

• Tribology and Lubricants
• /
• 제10권2호
• /
• pp.43-50
• /
• 1994

The hydrodynamic bearing is accepted in many rotating systems because it has a large load carrying capacity. But the anisotropic pressure distribution of the bearing can arise the unstable vibration phenomenon over a certain speed. The magnetic bearing is an active element so that the unstable phenomenon of the hydrodynamic bearing, which is induced by the anisotropic support pressure of the oil film, can be controlled if the control algorithm and the controller gains are chosen appropriately. In this study, we investigate the stabilization method of the hydrodynamic bearing system composing the hybrid bearing which is the single unit of hydrodynamic bearing and magnetic bearing. The load carrying conditions of the hybrid bearing is modelled by the sum of the stiffness and damping coefficients of the hydrodynamic and the magnetic bearings in each direction. The dynamics of the rotor is analyzed by the Finite Element Method and the stability limit is determined by the eigenvalues of the hybrid bearings and shaft system. The eigenvalue study of the system shows that the stability limit of the hybrid bearing is increased compared to that of the hydrodynamic bearing. A Small increment of the stiffness and damping coefficient of the hybrid bearings by the magnetic actuators can increase the stability limit of the system. In this paper we tried to show the design references of the hybrid bearings by using the nondimensional bearing parameters. The analysis results show the possibilities of the stability limit increment of the hydrodynamic bearing system by combining the magnetic bearing.