• Journal of Korean Institute of Industrial Engineers
• /
• v.36 no.2
• /
• pp.108-116
• /
• 2010

The maintenance of a deteriorating system is often imperfect. Previous studies have shown that the imperfect preventive maintenance (PM) can reduce the wear out and aging effects of deteriorating systems to a certain level between the conditions of as good as new and as bad as old. In this paper, we employ the concept of the improvement factor in investigating two optimal PM policies; failure limit policy and periodic PM policy. We redefine the improvement factor model as a function of the cost of PM, using this concept, we derive the conditions of optimal PM policies and formulate expressions to compute the expected cost rate. Based on this information, the determination of the maintenance policies which minimize the cost rate is examined. Numerical examples for the Weibull distribution case are also given.

• Journal of the Korean Mathematical Society
• /
• v.51 no.3
• /
• pp.609-633
• /
• 2014

From the ordinary notion of uniformly strong mixing for a sequence of random variables, a new concept called conditionally uniformly strong mixing is proposed and the relation between uniformly strong mixing and conditionally uniformly strong mixing is answered by examples, that is, uniformly strong mixing neither implies nor is implied by conditionally uniformly strong mixing. A couple of equivalent definitions and some of basic properties of conditionally uniformly strong mixing random variables are derived, and several conditional covariance inequalities are obtained. By means of these properties and conditional covariance inequalities, a conditional central limit theorem stated in terms of conditional characteristic functions is established, which is a conditional version of the earlier result under the non-conditional case.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.353-356
• /
• 2007

This paper presents the thermal and electrical characteristics of ZnO arrester blocks under the AC voltages. The leakage currents of ZnO arrester blocks were measured as a function of time. The temperature distributions of ZnO arrester blocks were observed by the forward looking infrared camera The degradation and thermal runaway of ZnO arrester blocks were closely related with the temperature limit of ZnO arrester blocks which decided heat generation and dissipation As a result, the degradation and thermal runaway of ZnO arrester blocks depend on the temperature and leakage current of ZnO arrester blocks.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.4
• /
• pp.385-389
• /
• 2009

This paper deals with the enhancement of the complex potential navigation for wheeled mobile robots. The circle theorem from complex function theory is used to avoid an obstacle, and the enhancement to avoid multiple obstacles is proposed. The limit cycle navigation can be combined for robot to kick the ball to the intentioned direction. Avoiding step and superposing twin vortices can be applied to adjust the direction of robot's trajectory. The proposed method is verified through a set of simulation works, and the feasibilities for the enhancement of complex potential theory are successful.

• Steel and Composite Structures
• /
• v.4 no.1
• /
• pp.9-21
• /
• 2004

The present study aims at the reliability analysis of steel towers against the limit state of deflection. For this purpose tip deflection of the tower has been obtained after carrying out the dynamic analysis of the tower using modal method. This tip deflection is employed for subsequent reliability analysis. A limit state function based on serviceability criterion of deflection is derived in terms of random variables. A complete procedure of reliability computation is then presented. To study the influence of various random variables on tower reliability, sensitivity analysis has been carried out. Design points, important for probabilistic design of towers, are also located on the failure surface. Some parametric studies have also been included to obtain the results of academic and field interest.

• Journal of The Korean Astronomical Society
• /
• v.29 no.1
• /
• pp.53-62
• /
• 1996

31 white dwarfs in 10 open clusters are examined, and their maximum mass and the upper mass limit of their progenitors are obtained as $1.22\pm0.02M_{\bigodot}\;and\;7.2\pm0.4M_{\bigodot}$ respectively, suggesting that the upper mass limit of white dwarfs is less than 8M_{\bigodot}$ The final mass of white dwarfs shows no clear correlation with the initial mass of their progenitors, and it is found that a deficient gap of initial mass exists between $\~4\;and\;~5.2M_{\bigodot}$. This gap seems to correspond to the mass range for carbon detonation or deflagration. The total expected numbers of white dwarfs are $11\~22$ in Hyades with 7 known white dwarfs and 17 in Praesepe with 8 known white dwarfs. These known white dwrfs are all younger than the others in both clusters. But one known white dwarf in Pleiades is older one among $2\~3$ expected white dwarfs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.3 no.1
• /
• pp.35-39
• /
• 1978

Present system of maritime mobile communication is depend upon HF Band mostly. Due to the range of technical development activities for HF Band has reached to uppermost limit, it is going to be hard to meet the requirements of communication which would be increased in the future, by utilization of HF Band. Studying difficulties of realizing communication function and the uppermost limit of HF Band system, in order to seek more smooth communications under present system, I have been studying remedy of problems in using of HF Band system with examples of relay of free-charge telegrams for the group of an ocean-going vessels of our country, and analized and studied of future prospects of maritime mobile communication.

• Journal of The Korean Astronomical Society
• /
• v.49 no.1
• /
• pp.1-8
• /
• 2016

The aim of this study is to describe the physical processes taking place in the solar photosphere. Based on 3D hydrodynamic simulations including a detailed radiation transfer scheme, we investigate thermodynamic structures and radiation fields in solar surface convection. As a starting model, the initial stratification in the outer envelope calculated using the solar calibrations in the context of the standard stellar theory. When the numerical fluid becomes thermally relaxed, the thermodynamic structure of the steady-state turbulent flow was explicitly collected. Particularly, a non-grey radiative transfer incorporating the opacity distribution function was considered in our calculations. In addition, we evaluate the classical approximations that are usually adopted in the onedimensional stellar structure models. We numerically reconfirm that radiation fields are well represented by the asymptotic characteristics of the Eddington approximation (the diffusion limit and the streaming limit). However, this classical approximation underestimates radiation energy in the shallow layers near the surface, which implies that a reliable treatment of the non-grey line opacities is crucial for the accurate description of the photospheric convection phenomenon.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1619-1625
• /
• 1997

This paper concerns a 2-axis PR type pneumatic manipulator system translating in vertical and rotating in horizontal directions. A simplified linear model is mathematically formulated similar to the pneumatic acturators in dynamic responses in order to devise an appropriate position control scheme. A PD controller preceding the on/off solenoid valve turns out not only economical but also effective in reducing rise time and amplitude of limit cycles, if its control gains are determined on the basis of frequency response. And, additional implementation of symmetric or asymmetric deadband at the PD controller output greatly helps minimize valve opening numbers, positional error, and undesirable direction-dependent property due to the gravitational load. Such a control concept is synthesized through numerical simulations and next applied to the experimental set-up, featuring enhanced positional servo characteristics.

• Geomechanics and Engineering
• /
• v.15 no.4
• /
• pp.937-945
• /
• 2018

A probabilistic study of a reinforced earth wall in a frictional soil using the surface response methodology (RSM) is presented. A deterministic model based on numerical simulations is used (Abdelouhab et al. 2011, 2012b) and the serviceability limit state (SLS) is considered in the analysis. The model computes the maximum horizontal displacement of the wall. The response surface methodology is utilized for the assessment of the Hasofer-Lind reliability index and is optimized by the use of a genetic algorithm. The soil friction angle and the unit weight are considered as random variables while studying the SLS. The assumption of non-normal distribution for the random variables has an important effect on the reliability index for the practical range of values of the wall horizontal displacement.