• 제목/요약/키워드: limestone dust

검색결과 30건 처리시간 0.022초

석분토를 이용한 지하공동의 친환경적 충전재 개발과 충전 및 재료특성 평가 (Development of the Environmentally Friendly Filling Material for the Underground Cavities using the Rock-dust and an Assessment on Filling and Material Characteristics)

  • 마상준;김동민
    • 한국지반공학회논문집
    • /
    • 제21권9호
    • /
    • pp.35-44
    • /
    • 2005
  • 최근 지하에 존재하는 석회공동이나 폐광산 채굴적과 같은 지하공동에 의한 사회간접시설물의 피해 사례가 많이 보고되고 있다. 특히 국내 건설 현장에서는 지하공동으로 인해 기존 설계 변경 및 새로운 대책공법 마련으로 과다한 공사비가 지출되는 등 많은 어려움을 겪고 있는 상황이다. 본 연구에서는 산업패기물로 처리되어 국내 환경을 오염시키고 있는 석분토를 이용하여 새로운 지하공동 충전재를 개발하였다. 재발된 충전재의 재료시험결과 압축강도는 $34{\~}60 kgf/cm^2$, 길이변화율은 $0.268{\~}0.776\%$, 흡수율은 $34.3{\~}46.9\%$로 나타났다. 또한, 현탁물 질량시험과 PH 시험을 통하여 개발된 충전재가 수중에서 분리되지 않는 성질이 있으며 환경친화적인 재료임을 확인할 수 있었다.

시멘트 산업에서의 질소산화물 저감 기술 동향 (Trend of Nitrogen Oxide Reduction Technologies in Cement Industry)

  • 서준형;김영진;조계홍;조진상;한경호;윤도영
    • 자원리싸이클링
    • /
    • 제29권6호
    • /
    • pp.114-124
    • /
    • 2020
  • 시멘트 산업에서 질소산화물 배출은 중요한 문제로 인식되고 있으며 이를 저감하는 기술은 공정변경, 단계적 연소, 저 NOx 버너, SNCR, SCR로 나눌 수 있다. 이중 시멘트 산업에서 가장 많이 사용되고 있는 SNCR 운영만으로는 향후 강화될 배출허용기준을 만족시키기 어려울 것이 예상되며 SCR 등의 추가적인 장비 개선 및 기술 확보가 필요한 상황이다. 이에 따라 최근에는 국외를 중심으로 SNCR 및 SCR 동시 적용 기술, 분진 및 탈질 필터 기술과 NO 산화를 이용한 제거기술 등을 개발하고 있다.

구조적 제약조건을 갖는 500 MW 석탄화력발전소 탈황설비의 성능개선 (Performance Enhancement of Flue Gas Desulfurization System with Structural Constraints in 500 MW Coal Fired Power Plants)

  • 김종성;유호선
    • 플랜트 저널
    • /
    • 제15권4호
    • /
    • pp.30-35
    • /
    • 2019
  • 미세먼지 감축에 대한 사회적 요구 증가와 강화되는 대기오염물질 배출허용기준을 충족시키기 위해 구조적 제약조건을 갖는 500 MW급 석탄화력발전소 탈황설비의 성능개선 방안을 제시하였다. 탈황설비 흡수탑을 통과하는 배기가스가 선회하도록 내부 설비를 개조하여 난류를 형성시켜 물질전달효율을 증가시키고 반응 면적 및 시간을 증가시킴으로써 황산화물 저감 및 먼지 포집 능력을 향상시킬 수 있었다. 개선결과 황산화물 제거효율은 91.61%에서 98.43%로 향상되었고 먼지 제거성능은 77.4%에서 87.08%로 향상되었다. 배출농도는 황산화물 7.85 ppm, 먼지 4.67 mg/㎥이 배출되어 2023년의 대기오염물질 배출허용기준인 황산화물 25 ppm, 먼지 5 mg/㎥을 만족하는 수준이다. 본 연구의 성능 개선 방식은 유사한 제약조건을 갖는 다른 석탄화력발전소에도 효과적으로 적용될 수 있으리라 기대된다.

농촌지역 건설폐기물 중간처리 사업장에서 발생하는 미세먼지의 발생 현황 및 인근 지역에 미치는 영향 연구 (A Study on the Status of Fine Dust Generated from Construction Waste Intermediate Treatment Plants in Rural Area and Its Impact on Neighboring Areas)

  • 장경필;박지선;김병윤
    • 한국농촌건축학회논문집
    • /
    • 제25권4호
    • /
    • pp.9-16
    • /
    • 2023
  • In this study, the status and characteristics of fine dust and its impact on neighboring areas were investigated to proactively respond to the government's environmental regulations expected in the future and to minimize the damage by the fine dust generated at construction waste intermediate treatment plants. In addition, since there are no such plants that can affect the surroundings with no houses or other waste treatment sites nearby, an independently located construction waste intermediate treatment plant was selected to compare the characteristics of fine dust with that from the construction waste intermediate treatment sites located in the downtown area. The conclusions of the study are as follows. (1) The measurement results of PM10 at 4 points in the plant showed that the location where the crushing facility was operating had an elevated level of fine dust at 80㎍/m3 on average and a maximum of 124㎍/m3, and the level rose to 110㎍/m3 at points where vehicles frequent. (2) The PM2.5 measurement results inside the plant showed that the average concentration of the reference point was 16㎍/m3 and the maximum value was 20㎍/m3, which was distributed within the management standard. (3) It was found that the average concentration of PM10 in the nearby area ranged from 28 to 38㎍/m3, which was similar to or lower than 36㎍/m3 of the reference point. Therefore, the concentration of the fine dust generated in the plant had a negligible effect on the increase in concentration of fine dust in nearby areas. (4) The heavy metal contents were measured from the filter paper collected from the plant. The PM10 was found to be about 14 to 26ng/m3, and PM 2.5 was 25 to 28ng/m3, which was the average of domestic atmospheric concentrations. (5) The SEM-EDX analysis results showed that the PM10 contained Si and O around 40% similarly for both. The SiO2, a component of silica occupied the most and C was present as CaCO3, which was assumed to be a limestone component. The remaining components included NaO, Al2O3, and CaO as trace oxides. (6) The SEM-EDX analysis results showed that the PM 2.5 contained 5 to 7% of Cl, which is a chlorine ion, and a small amount of K was detected at 2.51% in the sample from the shutdown plant.

고 농도 분진 만성노출 근로자의 세포성 면역기능과 활성산소종 (Reactive Oxygen Species and Cellular Immune Function of Workers Chronically Exposed to High-Level Dusts)

  • 김갑배;김기웅
    • 한국산업보건학회지
    • /
    • 제26권3호
    • /
    • pp.286-292
    • /
    • 2016
  • Objectives: This study aimed to evaluate the effects of chronical exposure to high-level dusts on cellular immune function. Methods: The subjects were 110 male workers, among whom 60 were chronically exposed to high-level dusts in mica, limestone and iron mines. The remaining 50 were office workers. Ambient total, respirable dust and crystalline silica in the workplace were sampled using personal air samplers and analyzed according to NIOSH method 0500. Serum levels of hydrogen peroxide, lipid peroxide and superoxide misutase activity were measured using absorption chromatography. The subpopulations of CD4+, CD8+, natural killer cells (CD16+) and CD3+ T-lymphocytes were examined by two-color staining using monoclonal antibodies. Results: The concentration of hydrogen peroxide was significantly higher in exposed workers and superoxide dismutase activity was significantly higher in control workers. No significant difference in numbers of T-lymphocyte subpopulations were observed between exposed and control workers. A significant correlation in exposed workers was observed among total dusts, respirable dusts and crystalline silica. Hydrogen peroxide was significantly correlated with total dust (r=0.720, p<0.01), respirable dust (r=0.770, p<0.01) and crystalline silica (r=0.678, p<0.01). Concentration of hydrogen peroxide showed a significantly negative correlation with numbers of CD8+ cells (r=-0.274, p<0.01), CD3+ cells (r=-0.222, p<0.01) and natural killer cells (r=-0.556, p<0.01). Conclusions: These results suggest that chronical exposure to high-level dust affects cellular immune function and effects might mediate through reactive oxygen species and inflammatory response.

석회암 내 방사상 발파균열을 예측하기 위한 동적파괴과정 해석법의 입력물성 결정법에 관한 연구 (Determining Parameters of Dynamic Fracture Process Analysis(DFPA) Code to Simulate Radial Tensile Cracks in Limestone Blast)

  • 김현수;강형민;정상선;김승곤;조상호
    • 화약ㆍ발파
    • /
    • 제31권2호
    • /
    • pp.6-13
    • /
    • 2013
  • 최근 채석장 및 광산의 파쇄설비로부터 발생되는 소음 및 분진에 의한 민원과 환경적인 문제가 대두되고 있으며, 이러한 파쇄설비를 지하공동으로 옮기는 사례가 증가하고 있다. 파쇄설비 및 가공시설을 갱내에 설치하기 위해서는 넓은 공간의 굴착이 이루어져야 하고, 대형공동 주변암반의 안정성이 확보되어야 한다. 지하공동 주변암반의 안정성은 굴착 시공 시 발생되는 굴착손상영역과 밀접한 관계가 있어, 최종파단면을 형성시키는 최외곽 발파공에 대한 정밀한 설계가 필요하다. 본 연구에서는 석회석 지하광산에서 대형공동 및 영구갱도 굴착시 발생 가능한 발파균열길이 및 손상영역을 예측하기 위한 수치해석기법을 제안하였다. 먼저 석회암블록에 대한 발파실험을 수행하고 발생된 인장균열수 및 길이를 분석하여, 동적파괴과정해석코드의 주요 입력변수인 평균 미시적 인장강도를 결정하였다.

환경오염 저감을 위한 석회석 광산개발방안에 대한 연구 (A Study on the Mining Method for Limestone Mines with Less Environmental Hazards)

  • 임한욱;김재동;백환조
    • 터널과지하공간
    • /
    • 제10권1호
    • /
    • pp.80-91
    • /
    • 2000
  • 석회석의 노천 채굴법은 갱내 채굴법에 비하여 채수율, 품위조절, 원가, 안전면에서 유리한 것으로 인식되고 있으나 발파로 인한 지반진동, 소음, 분진 등 환경 오염원을 유발시키며 특히 지형과 산림을 훼손한다 본고에서는 백두대간에 인접한 한라 석회석 광산을 모델로설정하고 연구하였다. 환경 오염원을 저감시키고, 원 지형 및 산림의 보존을 위하여 노천 채굴과 함께 갱내 채굴을 동시에 채택할 것을 제의한다. 갱내 채굴의 경우 중단 채굴법을 추천하며 이때 한 광획의 크기는 80(높이)$\times$70(너비)$\times$(100~120m)(연장)이며, 태수율은 약 42%로 예상된다. 환경오염 저감을 위한 대책도 제시하였다. 파쇄입도의 조정을 위하여 암반태 불연속면의 발달 상태를 고려하고, 장약공 밑부분과 중간부분의 장약밀도를 변경해야 한다. 환경오염 저감의 한 방안으로 차폐벽의 채택과 갱내 채굴시 출광 가능량 등을 검토하였다.

  • PDF

항만 인근 미세먼지 노출 영향권 및 오염도 분석 :동해항 운영현황을 중심으로 (Evaluation of Fine Dust Diffusion and Contamination Degree : Focused on the Operation Status of Donghae Port)

  • 황제호;김시현;강달원
    • 한국항해항만학회지
    • /
    • 제46권3호
    • /
    • pp.251-258
    • /
    • 2022
  • 동해항은 주거 생활권인 송정동, 북평동과 매우 인접한 거리에 위치하고 있으며 송정동에는 총 21,179세대, 북평동에는 5,754세대가 거주하고 있다. 동해항에서 처리되는 주요화물은 석회석, 시멘트, 무연탄, 유연탄 등으로 분진성이라는 특성을 갖는다. 따라서 동해항 운영으로 인해 산화물 분진, 미세먼지 등 대기오염물질이 발생하여 확산되는 과정에서 인근 주거지역에 심각한 대기공해를 유발하고 있다. 이는 주민들의 생활과 건강에 악영향을 미치고 있으며, 배후 주거지에 거주하는 주민들은 동해항을 혐오시설로 인식하고 있는 실정이다. 현재 동해항에서는 항만산업에 기인한 미세먼지 배출량을 저감하기 위한 목적으로 장기적인 관점에서 항만 인프라와 장비운영 환경을 개선하고자 단계적인 접근을 하고 있으나 항만 인근지역의 대기공해에 대한 개선효과가 점진적으로 나타나기까지 오랜 시간이 소요될 것으로 판단된다. 본 연구에서는 단기적인 관점에서 항만 인근지역 주민들이 상시적으로 체감할 수 있는 미세먼지 농도 관리가 실현될 수 있도록 주간, 야간 및 계절주기에 따른 동해항 주변지역의 미세먼지 농도추이, 미세먼지 확산 패턴, 고농도의 미세먼지가 발생하는 공간분포를 풍향, 풍속 변수를 고려하여 분석하였다. 현재 추진되고 있는 미세먼지 저감 장기계획과 더불어 동해항 배후 주거권역에 대한 미세먼지 확산 영향권과 오염도 분석결과를 기반으로 주간, 야간 및 계절 주기에 따른 상시적 미세먼지 농도관리가 병행된다면 더욱 효과적인 대기질 관리가 가능할 것으로 판단된다.

Cancer Mortality and Incidence in Cement Industry Workers in Korea

  • Koh, Dong-Hee;Kim, Tae-Woo;Jang, Seung-Hee;Ryu, Hyang-Woo
    • Safety and Health at Work
    • /
    • 제2권3호
    • /
    • pp.243-249
    • /
    • 2011
  • Objectives: Cement contains hexavalent chromium, which is a human carcinogen. However, its effect on cancer seems inconclusive in epidemiologic studies. The aim of this retrospective cohort study was to elucidate the association between dust exposure in the cement industry and cancer occurrence. Methods: The cohorts consisted of male workers in 6 Portland cement factories in Korea. Study subjects were classified into five groups by job: quarry, production, maintenance, laboratory, and office work. Cancer mortality and incidence in workers were observed from 1992 to 2007 and 1997-2005, respectively. Standardized mortality ratios and standardized incidence ratios were calculated according to the five job classifications. Results: There was an increased standardized incidence ratio for stomach cancer of 1.56 (27/17.36, 95% confidence interval: 1.02-2.26) in production workers. The standardized mortality ratio for lung cancer increased in production workers. However, was not statistically significant. Conclusion: Our result suggests a potential association between cement exposure and stomach cancer. Hexavalent chromium contained in cement might be a causative carcinogen.

Durability properties of fly ash-based geopolymer mortars with different quarry waste fillers

  • Tammam, Yosra;Uysal, Mucteba;Canpolat, Orhan
    • Computers and Concrete
    • /
    • 제29권 5호
    • /
    • pp.335-346
    • /
    • 2022
  • Geopolymers are an important alternative material supporting recycling, sustainability, and waste management. Durability properties are among the most critical parameters to be investigated; in this study, the durability of manufactured geopolymer samples under the attack of 10% magnesium sulfate and 10% sodium sulfate solution was investigated. 180 cycles of freezing and thawing were also tested. The experimentally obtained results investigate the durability of geopolymer mortar prepared with fly ash (class F) and alkali activator. Three different quarry dust wastes replaced the river sand aggregate: limestone, marble, and basalt powder as fine filler aggregate in three different replacement ratios of 25%, 50%, and 75% to produce ten series of geopolymer composites. The geopolymer samples' visual appearance, weight changes, UPV, and strength properties were studied for up to 12 months at different time intervals of exposure to sulfate solutions to investigate sulfate resistance. In addition, Scanning Electron Microscopy (SEM), EDS, and XRD were used to study the microstructure of the samples. It was beneficial to include quarry waste as a filler aggregate in durability and mechanical properties. The compact matrix was demonstrated by microstructural analysis of the manufactured specimens. The geopolymer mortars immersed in sodium sulfate showed less strength reduction and deterioration than magnesium sulfate, indicating that magnesium sulfate is more aggressive than sodium sulfate. Therefore, it is concluded that using waste dust interrogation with partial replacement of river sand with fly ash-based geopolymers has satisfactory results in terms of durability properties of freeze-thaw and sulfate resistance.