• 한국철도학회논문집
• /
• 제19권2호
• /
• pp.135-144
• /
• 2016

분기기 거더 경량화는 제작비 감소 및 제작의 용이함을 위해 필수적이다. 자기부상열차용 3방향 분기기 경량화를 위한 설계변수는 부상안정성과 관련 있기 때문에 신중히 결정되어야 한다. 도시형 자기부상열차는 대차가 레일을 감싸는 구조로 되어 있기 때문에 거더 높이 변경을 통해서 경량화가 가능하다. 실제 테스트베드에서 반복 주행시험을 통해 안정성을 확보해야 하지만 공간적, 비용적 제한에 의해 여러 거더 높이의 테스트베드 제작은 불가능하며 이를 보완하기 위한 설계 파라미터 연구는 필수적이다. 본 논문에서는 자기부상열차 주행 시 3방향 분기기 경량화에 따른 부상안정성을 고려한 설계 파라미터 연구에 그 목적이 있다. 이를 위해 분기기 거더 높이 변경을 통해 경량화하였고 모달 중첩법을 이용하여 유연체로 모델링 하였다. 유연체 분기기와 자기부상열차 동역학 모델과의 연동해석을 통해 차량의 통과속도, 횡 공극, 부상 공극을 비교하고 부상안정성에 미치는 영향을 분석하였다. 이를 통해 거더높이와 부상안정성과의 상관관계에 대해 분석하였다. 본 논문의 연구 결과는 자기부상열차용 분기기 설계에 활용 가능할 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.261-264
• /
• 1997

A contactless eddy current type braking system is developed to take advantages of the recent brake system which uses hydraulic force can show high efficiency in a certain velocity region, but not in a high velocity region, and has initial response delay time and pressure build-up time which make stopping distance longer. These are the limits of mechanical brake system of a contact type, which makes a concept brake system required. So, in this paper, the contactless brake system .of a inductive current type is chosen instead of hydraulic brake system. This brake system can be used almost forever for being no wear and contributed to lightening weight of a vehicle. Besides, the contactless brake system can be used as that of electric or solar car with anti-lock brake system. The analysis of induced electromotive force and braking torque obtained with theoretical approximate model, the design of a braking system and a nonlinear controller, and the results of simulation of the ABS, experiment are included.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.345-352
• /
• 1998

The dynamic analysis of a train system has tended to analyze one vehicle or subsystem of that rather than to analyze entire vehicles. But, the speeding and lightening of a train requires more accurate analysis. Thus, the analysis of entire vehicles is required but it spends much time. Therefore, it is needed to find out the new analytic method which is more accurate and efficient. This paper suggests a new method for analyzing a multi-vehicle system more efficiently, using‘mechanical impedance’At first, get the impedance of vehicles which influence the dynamics of the object car, through analyzing the dynamics of a vehicle. ‘Equivalent system’, a simple mechanical system, of which the impedance is similar to that ,is proposed. Then, the equivalent system was applied to a vehicle and it showed that the equivalent system works like a real vehicle system. Finally, we tried non-linear analysis of a vehicle to which the equivalent system is applied.

• 동력기계공학회지
• /
• 제19권3호
• /
• pp.36-41
• /
• 2015

The true north-finding equipment utilizing gyro sensor is used for INS(Inertial Navigation System) and has an increasing preference for gyro compass system due to compact size, lightening, low power and price. The purpose of this experiment is to research gyro compass system providing high performance in the field of manned or unmanned gyro compass system which proposes the accuracy of 1% utilizing experimented equipment at true north of the earth. Unlike the conventional system, the proposed gyro sensor system indicates to be applied in the various and specific equipment using multiple technique and method.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.25-27
• /
• 2009

In this paper, a sensor network system for providing intelligent home network services is suggested. It steadily collects biological data of resident people and automatically detects emergency situations LEID(Lighting Embedded Information Device) system are the most essential component of the sensor network. They embed sensor network technology into lightening devices which are indispensable most living spaces. To verify practicality of the proposed intelligent home network service system, a prototypical system is realized in the Smart Home Industrialization Support Center at Kookmin University, and is tested within many practical circumstances.

• 항공우주시스템공학회지
• /
• 제10권1호
• /
• pp.118-126
• /
• 2016

North Korea has continued developing ballistic missiles with various ranges. Even through the recent launch long-range missiles, it can be inferred that North Korea's Missile technology has reached a level where it can even threaten the US. moreover, through the three times nuclear tests, North Korea is known to have succeeded at gaining 10~20KT of explosive power as well as the minimization and lightening of nuclear warhead. Considering the short length of war zone in Korean peninsula and the possibility of nuclear equipment, if be the most severe threat across the whole peninsula. Since the midcourse phase flight takes the longest time, ROK should establish the ability to intercept at this middle phase. From this perspective, this paper describes mission effect of a sea-based BMD system through empirical threat and flight characteristic analysis using MIT model that was not suggested in original research.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.566-568
• /
• 1993

A measuring technique for the fast transient high voltage is under development by use of laser source in order to substitute for the conventional measuring system which could bring about several technical inconveniences. At this moment, this work is aimed to construct a compact measuring system with the use of Pockels cell and specially designed voltage divider. This system is likely to enable us to measure the lightening impulse voltages at the level of 30kV, 50kV and 70kV. Throughout this work, qualified measuring devices are required to be developed for discriminating different kinds of noise from which the system should be protected.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.821-826
• /
• 2001

In 2000, Standard Design Loads for Building was changed especially in seismic load. According to the change, seismic-resisting capacity of deteriorated apartment houses has to be reestimated. This research is to propose seismic-strengthening and improving methods of structural efficiency of RC deteriorated apartment houses. The analysis models were shear-wall system(36/58/79$m^{2}$) and beam-column system(11/19/25py) which were constructed in early 1980 and didn't consider seismic load. The definite methods are addition of shear walls and lightening of load. The story-drifts of shear wall systems exceed allowable story-drifts so that two methods was applied. The story-drifts of beam-columns system satisfy allowable story-drifts, thus the latter is applied. The seismic-resisting capacity of these systems was improved by the two methods. This research will be helpful to remodel deteriorated apartment houses.

• 동력기계공학회지
• /
• 제19권4호
• /
• pp.76-81
• /
• 2015

The production of electricity from wind energy is noticed as economic power generation system in the natural resource. Lately, since lots of wind turbine have installed globally, the accidents have increased gradually. In this paper, we classified domestic information for 10 years, information of new energy and industrial technology development organization(NEDO) for 4years and caithness windfarms information forum(CWIF) for 15 years according to part and cause of wind turbine accident. We found that the main causes of accidents are storm, lightening and carelessness. The results of classifying and analyzing the informations, should be used to take measures on the accident prevention of wind turbine.

• 한국분무공학회지
• /
• 제9권4호
• /
• pp.77-82
• /
• 2004

This paper describes the improvement of engine cooling system. To improve engine cooling performance, the authors approached in two ways. One is to increase water pump performance, changing of impeller shape and lightening of material were carried out. The second one is cooling efficiency rise, which were investigated with head gasket coolant flow passage optimization with flow visualization technique. The test results show that water pump performance was increased effectively, reduction of pump drive torque, and increase of pump flow-rate and pressure rise. Gasket hole pattern optimization test results represent an optimized head coolant flow which stands cross flow from exhaust to intake port side and small vortex were removed.