• 대한인간공학회지
• /
• 제36권1호
• /
• pp.23-36
• /
• 2017

Objective: This paper presents a study to evaluate the WBGT index for assessing the effects of a wide range of outdoor weather conditions on human responses. Background: The Wet Bulb Globe Temperature (WBGT) index was firstly developed for the assessment of hot outdoor conditions. It is a recognised index that is used world-wide. It may be useful over a range of outdoor conditions and not just for hot climates. Method: Four group experiments, involving people performing a light stepping activity, were conducted to determine human responses to outside conditions in the U.K. They were conducted in September 2007 (autumn), December 2007 (winter), March 2008 (spring) and June 2008 (summer). Environmental measurements included WBGT, air temperature, radiant temperature (including solar load), humidity and wind speed all measured at 1.2m above the ground, as well as weather data measured by a standard weather station at 3m to 4m above the ground. Participants' physiological and subjective responses were measured. When the overall results of the four seasons are considered, WBGT provided a strong prediction of physiological responses as well as subjective responses if aural temperature, heart rate and sweat production were measured. Results: WBGT is appropriate to predict thermal strain on a large group of ordinary people in moderate conditions. Consideration should be given to include the WBGT index in warning systems for a wide range of weather conditions. However, the WBGT overestimated physiological responses of subjects. In addition, tenfold Borg's RPE was significantly different with heart rate measured for the four conditions except autumn (p<0.05). Physiological and subjective responses over 60 minutes consistently showed a similar tendency in the relationships with the $WBGT_{head}$ and $WBGT_{abdomen}$. Conclusion: It was found that either $WBGT_{head}$ or $WBGT_{abdomen}$ could be measured if a measurement should be conducted at only one height. The relationship between the WBGT values and weather station data was also investigated. There was a significant relationship between WBGT values at the position of a person and weather station data. For UK daytime weather conditions ranging from an average air temperature of $6^{\circ}C$ to $21^{\circ}C$ with mean radiant temperatures of up to $57^{\circ}C$, the WBGT index could be used as a simple thermal index to indicate the effects of weather on people. Application: The result of evaluation of WBGT might help to develop the smart clothing for workers in industrial sites and improve the work environment in terms of considering workers' wellness.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.23-23
• /
• 2009

GaN-based nitride semiconductors have attracted considerable attention in high-brightness light-emitting-diodes (LEDs) and laser diodes (LDs) covering from green to ultraviolet spectral range. LED and LD heterostructures are usually grown on (0001)-$Al_2O_3$. The large lattice mismatch between $Al_2O_3$ substrates and the GaN layers leads to a high density of defects(dislocations and stacking faults). Moreover, Ga and N atoms are arranged along the polar [0001] crystallographic direction, which leads to spontaneous polarization. In addition, in the InGaN/GaN MQWs heterostructures, stress applied along the same axis can also give rise to piezoelectric polarization. The total polarization, which is the sum of spontaneous and piezoelectric polarizations, is aligned along the [0001] direction of the wurtzite heterostructures. The change in the total polarization across the heterolayers results in high interface charge densities and spatial separation of the electron and hole wave functions, redshifting the photoluminescence peak and decreasing the peak intensity. The effect of polarization charges in the GaN-based heterostructures can be eliminated by growing along the non-polar [$11\bar{2}0$] (a-axis) or [$1\bar{1}00$] (m-axis) orientation instead of thecommonly used polar [0001] (c-axis). For non-polar GaN growth on non-polar substrates, the GaN films have high density of planar defects (basal stacking fault BSFs, prismatic stacking fault PSFs), because the SFs are formed on the basal plane (c-plane) due to their low formation energy. A significant reduction in defect density was recently achieved by applying blocking layer such as SiN, AlN, and AlGaN in non-polar GaN. In this work, we were performed systematic studies of the defects in the nonpolar GaN by conventional and high-resolution transmission electron microscopy.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제11권1호
• /
• pp.101-116
• /
• 1989

Proplast and Porous Polyethylene which have porous structures as low-modulus polymers have been recently used in maxillofacial plastic and reconstructive surgery. The purpose of this study was to compare the response of adajacent tissue, new bone formation and stability after augmentation by differen methods of subperiosteal graft using proplast and purous polythylene in rabbit mandible. The augmentation procedure was carried out by dividing into two groups, A and B. A group consisted of subperiosteal graft on the cortex, and the other B group was made up only graft following artificial decortication in the mandibular body of rabbit. The experimental animals were sacrificed on the 1st, 2nd, 4th and 8th week after grafting for macroscopic and light microscopic examination. The samples extracted at the 6th postgrafting week were also used for biometric testing and scanning electron microscopic examination. The results obtained from this study were as follows : 1. Macroscopically, infection of graft site, deformation and migration of graft material were not observed in all experimental groups. 2. B group showed more rapid and increased bone formation and the greater stability than A group, and tissue response was similar to each other. 3. In the tissue response, macrophages and cellular infiltrations were observed in Proplast group, but few in PHDPE group. 4. In bone formation of A group, Proplast group showed no bone formation until the 8th week, but PHDPE group showed small quantity of osteoid tissue from the 2nd week and appositional bone growth with new bone formation at the 8th week. 5. In bone formation of B group, both Proplast and PHDPE group showed bone formation, but PHDPE group showed more rapid and larger bone formation. 6. In pattern of bone formation, Proplast group mainly showed appositional bone growth pattern connected with graft site. On the other hand, PHDPE group showed mixed pattern of new bone formation in the pore connective tissue with appositional bone growth from graff site. 7. The maximum mean values of shear stress were serially $111.3gf/mm^{2}$ in PHDPE of B group, $84.8gf/mm^{2}$ in PHDPE of A group, $32.9gf/mm^{2}$ in Proplast B group, and $15.7gf/mm^{2}$ in Proplast of A group. From above results, It was suggested that the capacity of bone formation and stability between bone and graft material were dependent on the pore size and structure of graft material itself, the state of graft site and tissue response.

• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.266-276
• /
• 1996

Numerous factors are known to affect the accuracy of elastomeric impression materials. Factor often overlooked is the quality of the bond between putty and wash during corrective reline impression technique. The putty-wash bond strength must be strong enough to over-come the local stress at putty-wash interface. It is not always possible to avoid saliva contamination in making corrective wash impres-sion. And putty preliminary impression material con be used as a template for provisional restoration. Human saliva and the residual monomer of autopolymerizing acrylic resin are thought to affect the bond strength and the failure type. This study examined the effect of contaminants like human saliva, and residual resin monomer on the putty-wash bond strength and the effectiveness of treatment. 1. Of the tested three brands of Vinyl Polysiloxane impession meterial, Express Exhibited the greatest bond strength followed by Eamix and Perfect showed the lowest putty-wah bond strength. 2. Coating the putty substrates with human saliva did not produce decreased failure load in all the breands of Vinyl Polysiloxane impression meterail. 3. Of the three brands of VPS impression material that were exposed to methhylmethacry-late resin(Jet), only the putty-wash bond strength of the Perfect group diminished signifi-cantly. Moreover, all the specimens from group C of Perfect exhibited adhesive failure. 4. Exposing the substrates to ethylmethacrylate resin(SNAP. diminished the putty-wash bond strength significantly. With Perfect and Examix, failure occurred cohesively through the light-body, whereas with Express, failure occurred adhesive-cohesively. 5. Removing approximately 1mm thickness of the contaminated putty interface was the most effective treatment in countering the undesirable effect caused by residual resin monomer. The putty-wash bond strength of the groups that were treated with 1mm even putty reduction was not significantly different from those of control groups. With Perfect and Examix, cleaning the specimens with gauze soaked in 70% isopropyl alcohol increased the putty-wash bond strength, but was not as effective as 1mm even reduction of contaminated putty substrates. With Express, 70% isoproryl alcohol treatment exhibi0ted comparable putty-wash bond strength to that of control group.

• 한국작물학회지
• /
• 제65권4호
• /
• pp.365-376
• /
• 2020

미성숙배를 이용한 조직배양은 높은 재분화율로 인하여 밀 형질전환에 적용하기 위한 가장 좋은 방법이지만 매우 한정적인 수집시기와 생육조건으로 인해 이용하기 위한 시간의 제한과 많은 노동력이 집약되어있다. 따라서 안정적이고 지속적인 미성숙배 수집을 위해 스피드 브리딩 조건을 이용하여 출수가 촉진된 밀 이삭을 이용한 미성숙배 조직배양의 효율을 검정하였고, 연구결과는 다음과 같다. 1. 스피드 브리딩 조건의 출수기는 정상조건과 비교하여 36일에서 54일까지 단축되었으며, 개화 후 11일 된 영과에서 수집된 미성숙배 조직배양의 재분화율과 소식물체 출현 비율은 정상조건과 비교하여 유의한 차이가 없다는 것을 확인하였다. 2. 두 배양 조건에서 항산화 효소 활성 분석 결과 차이가 나타나지 않았으며, 연관 표지 유전자 발현 검정을 통하여 일장과 세포분열과의 관계를 검정하여 스피드 브리딩 조건에서 수집된 이삭의 안정성을 검정하였다. 3. 본 연구 결과는 스피드 브리딩 조건을 활용한 미성숙배 조직배양에 활용될 것이며 관련 유전자 발현 및 항산화 활성 검정 결과를 통해 검증된 안정적 미성숙배는 밀 형질전환 기술 개발에 활용될 수 있을 것으로 사료된다.

• 생태와환경
• /
• 제40권2호
• /
• pp.244-253
• /
• 2007

본 연구에서는 잉어의 생태 반응에 미치는 초음파(강도 31 dB re 1 ${\mu}Pa$, 주파수 $14{\sim}15$ kHz)의 영향을 구명하기 위하여 치사율, 체중변화, 건강성 평가 및 행동패턴을 관찰하였다. 실험기간 동안 초음파에 노출된 잉어 Cyprinus carpio의 치사율은 대조군을 포함하여 처리군 모두 5% 이하로 실험구 사이의 치사율은 뚜렷하게 구별되지 않았다(P>0.05). 각각의 실험구에서 측정한 실험어류의 평균 체중은 실험종료 시 대조군에 비해 처리군에서 약간 증가하는 경향을 보였으나 실험구간의 뚜렷한 차이는 보이지 않았다. 대조군과 고처리군의 일부 개체들은 가벼운 표피손상과 꼬리지느러미의 출혈 흔적이 관찰되었으나 눈, 지느러미, 기생충 감염, 흉선의 출혈 및 아가미에서는 이상증상이 전혀 관찰되지 않았다(P>0.05). 근거리에서 일시적으로 초음파를 발생시켰을 때 어류는 음원으로부터 회피하는 방향성 움직임을 보였으나 원거리에서 초음파에 노출된 잉어는 뚜렷한 행동변화를 보이지 않았다. 결론적으로 낮은 강도의 초음파에 노출된 어류는 초음파 발생에 따른 심각한 스트레스는 받지 않을 것으로 판단된다.

• 생명과학회지
• /
• 제9권2호
• /
• pp.222-230
• /
• 1999

비만증이란 체내에 지방이 과도하게 축적된 상태이고, 당뇨병이란 혈당을 조절하는 insulin의 부족 혹은 작용 결함으로 인한 질환이다. 비만과 당뇨병의 일반적인 원인으로는 유전, 과식, 운동부족, 스트레스 등이 있다. 비만 및 당뇨병 환자는 섭취 열량을 줄이고 신체에 영양공급이 균형있게 이루어 지도록 균형잡힌 식생활을 해야 하며 고열량식품의 섭취를 줄여야 한다. 일반적인 운동 지침은 운동전 의학적 진단과 병력 검사가 우선되어야 하며, 점진적으로 운동강도를 높여야 한다. 비만과 당뇨병의 예방 및 치료를 위해서는 일반적으로 유산소 운동(조깅, 수영, 테니스, 에어로빅 댄스 등)을 60~80$\%$ HRmax(50~70$\%$ $Vo_2$ max)강도로, 15~60분, 주 3~6회 하는 것이 적당하다. 특히 당뇨병 환자는 유형에 따른 처방을 다소 달리해야 하며, 운동중 탄수화물이 든 간식을 하고 인슐린 활동이 최고에 달했을 때 운동을 중지하며 운동 후 저혈당 발생의 가능성에 대비하여 혈당을 높이기 위한 탄수화물 15~20g 분에 해당하는 식품을 섭취한다. 비만과 당뇨병 환자의 치료에 있어서 운동요법은 식이요법과 병행해서 이루어지는 것이 더욱 효과적이다

• 패션비즈니스
• /
• 제2권1호
• /
• pp.71-75
• /
• 1998

The Miaos who is the minority people mainly living in the southwestern part of China, expressed their indicator and solidarity through the costume in order to maintain their racial character while experiencing numerous adversities over thousands of years, where the costume has served as a source of cohesion as well as a primitive religious thought, and also showed their faith, desire, longing and aspiration. This study examined the Miao's traditional costume by classifying it into the following; hair style, headdress, upper and lower garments, and other costume. And the silver ornaments used for attire and their symbolic meaning were examined. The result of the study is summarized as follows. 1. The reason that types of the costume has been diversified is because there was promise of ancestors who intended to differently express the type of a kind as symbol of the racial branch that is the Miao's special type of society. Thus, the costume type could tell where a tribe live. Another reason is because only marriage between families with different surname but the same type of costume was accepted. 2. As women made and wore the costume themselves, it also served as a means of being proud of their skill or wealth, they tried to make it more beautiful and it was also used as a token of marriage or love between relatively enlightened men and women. 3. The design used on the costume was expressed as a symbolic meaning of indicator to strengthen the racial solidarity because it connoted worship to ancestors who had experienced lots of adversities. 4. The hair style was expressed in various styles by using Kache such as Chukye, Byunbal and Kokye. It is likely that ornaments used on the head of women in the form of cow's horn or silver crown were used as one of the methods to stress the valuableness of the cattle that were essential to agricultural life. In addition, various styles of turbans were used to indicate the respective regions. 5. Cock's feather ornaments or silver ornaments in the form of pheasant's feather on the edge of women's skirts, peasant's feathers that men wore on their head, or Baekjoui and men wore resulted from the Miaos' thought of adoration for birds, which implied a primitive religious meaning. 6. As the region where the Miaos live yields much silver, the silver ornaments were mostly used to be proud of wealth, which symbolized light and pureness.

• 보존과학회지
• /
• 제26권3호
• /
• pp.277-294
• /
• 2010

서산마애삼존불상(국보 제84호)을 이루는 암석은 담회색을 띠는 중립질 흑운모 화강암이며 부분적으로 페그마타이트 및 석영 세맥이 관찰된다. 삼존불이 조각된 암반은 전면에 걸쳐 불규칙적인 불연속면의 발달로 크기와 모양이 다양한 암괴를 형성하고 있으며, 암반 사면의 안정성이 취약한 것으로 나타났다. 훼손도 진단 결과, 수직 및 수평 절리가 밀집된 부분을 중심으로 물리적 풍화와 표면변색에 의해 훼손이 가중된 상태를 보인다. 이를 삼존불의 전체 면적대비 훼손율 42.7%에 비교했을 때, 물리적 풍화는 9.6%, 변색은 33.1%로 변색에서 높은 점유율을 보였다. 초음파 측정 결과, 삼존불은 전반적으로 심한 풍화단계(HW)에 있으며 삼존불에 발달하고 있는 불규칙한 절리계를 따라 약 1,000m/s의 저속도대가 분포하여 구성 암석이 약화된 것을 알 수 있다. 삼존불 보호각 내외부의 상대습도는 사계절 모두 평균 70% 이상을 기록하며, 95% 이상의 고습도 영역에서 높은 빈도수를 나타냈다. 이 고습도 환경은 강수와 함께 암석 표면에 결로를 발생시켜 수분을 공급하며 수분의 침투와 함수율이 높은 균열 및 절리대를 따라 물리적, 화학적, 생물학적 풍화를 진전시키는 것으로 사료된다. 따라서 삼존불의 과학적 보존을 위해 수분문제를 비롯하여 지속적인 보존환경 모니터링을 통한 환경제어 방안이 필요할 것으로 판단된다.

• Restorative Dentistry and Endodontics
• /
• 제35권1호
• /
• pp.51-58
• /
• 2010

복합레진이 개발된 이후 많은 물성의 향상이 이루어졌으나 복합레진의 중합수축은 아직 해결되지 않은 주요 단점으로 남아있다. 중합수축이 적은 복합레진을 만들기 위한 많은 노력이 이루어졌고, 최근에 기존의 methacrylate 기질이 아닌 silorane 기질의 복합레진이 개발되었다. 본 연구에서는 silorane 기질의 복합레진과 methacrylate 기질의 복합레진의 중합수축거동을 측정하고 비교하고자 하였다. 온도변화에 민감하지 않으며 실시간으로 복합레진의 체적 중합수축을 측정할 수 있는 계측장치를 제작하여 사용하였다. 5종의 methacrylate 기질의 수복용 복합레진(Beautifil, Z100, Z250, Z350, Gradia X)과 silorane 기질 복합레진 (P90)의 중합수축을 10분 동안 측정하여, 중합수축량, 최대 중합수축률 그리고 최대수축시간을 비교하였다. 복합레진의 중합수축은 제품별로 많은 차이를 보였다. Silorane 기질의 P90복합레진의 중합수축이 1.48%로 가장 낮았고 Beautifil 복합레진의 중합수축이 2.80%로 가장 높았다. Methacrylate 계열의 복합레진 사이에도 중합수축량에 제품별로 유의한 차이를 보였다(p<0.05). 최대 중합수축률은 P90이 0.13%/s로 가장 낮았고 Z100이 0.34%/s로 가장 높았다. 최대 수축시간은 methacrylate기질의 복합레진(2.4-3.1초)에 비해, silorane 기질의 P90 복합레진이 6.7초로 두 배 이상 길었다. 최대중합수축률은 중합수축과 최대수축시간의 역수를 곱한 값과 강한 양의 상관관계를 보였다(R = 0.95).