• 한국광학회지
• /
• 제32권4호
• /
• pp.187-194
• /
• 2021

본 논문에서는 주 증폭기가 양방향 펌핑 방식인 MOPA (master oscillator power amplifier) 협대역 고출력 광섬유 레이저를 제작하였으며, 제작된 레이저의 출력 특성을 연구하였다. 이터븀이 도핑된 코어 25 ㎛, 클래드 400 ㎛ 편광 유지 광섬유를 사용하여 주 증폭부를 제작하였으며, 신호 광원은 PRBS (pseudo-random binary sequence) 신호에 의해 위상 변조된 3 GHz, 10 GHz의 선폭을 갖는 광원을 사용하였다. 3 GHz의 선폭을 가진 신호 광원을 이용하여 순방향과 역방향 펌프 비율을 조절하며 SBS (stimulated Brillouin scattering) 특성을 분석하였다. 10 GHz의 선폭을 가진 신호 광원을 이용하여 주 증폭기의 펌핑 비율에 따른 TMI 특성을 분석하였다. 순방향 및 역방향 펌프 비율을 1.6:1로 입사시켰을 때 주 증폭기의 출력을 1 kW까지 증폭하였으며, 기울기 효율과 빔 품질(M²)은 각각 80%, 1.36으로 측정되었다.

• 한국대기환경학회지
• /
• 제11권3호
• /
• pp.291-298
• /
• 1995

An intensive field study was carried out during Aug. 1993 in Seoul to study the characteristics of summertime visibility and diurnal trend of ionic composition of ambient particles. A transmissometer, nephelometer with heated and unheated inlets, PM3 fine particle sampler, and cascade impactor were used to measure optical and particle properties of ambient air. During this study period, a weak smog episode has occurred. Light scattering by particles is the most dominant factor on total light extinction. The effect of light absorption by particles in Seoul is much higher than other major cities in U.S.A. throughout the summer and fall with relatively constant values. The effect of water on $b_{sp}$ was small during the period. The particle size distribution shows a typical bimodal one. Sulfate, ammonium, chloride, and nitrate are the major chemical species in fine fraction aerosols, about 30% of toral mass concentration. Concentraion of sulfate is higher during the daytime while those of nitrate and chloride are higher during the nighttime. Ammonium concentration is constant through the daytime.

• 한국대기환경학회지
• /
• 제25권4호
• /
• pp.325-338
• /
• 2009

National parks provide recreation, health, and science to human being. The provision of beautiful landscape view of the national park improves an economic and social phase of a nation. However, visibility impairment frequently occurred in the national park area of Gyeongju. The purpose of this study is to investigate the physical and the chemical characteristics of visibility reduction observed at the national park area of Gyeongju. Optical, chemical, meteorological characteristics and scenic monitoring were performed at the visibility monitoring station of Gyeongju University located at the Seoak section of Gyeongju national park from April 28 to May 9, 2008. Light extinction, light scattering, and light absorption coefficients were continuously measured using a transmissometer, a nephelometer, and an aethalometer, respectively. In order to investigate the impact of aerosol chemistry on visibility impairment, size-resolved aerosols were collected at intervals of 2-hour (from 8 A.M. to 6 P.M.) and 14-hour (from 6 P.M. to 8 A.M.) interval each sampling day. The average light extinction coefficient and the average visual range were measured to be $270{\pm}135\;Mm^{-1}$ and $14.5{\pm}6.3\;km$ during the intensive monitoring period, respectively. It was revealed that sulfate particle was the largest contributor to the light extinction under hazy condition. Organic mass accounted for about 26% of the average light extinction. The mass extinction efficiencies for $PM_{1.0}$, $PM_{2.5}$, and $PM_{10}$ were estimated to be 9.0, 4.7, and $2.7\;m^2\;g^{-1}$ under the consideration of water growth function of hygroscopic aerosols, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권3호
• /
• pp.378-386
• /
• 2009

The effect of fuel mixing on soot structure with methane, ethane, and propane to ethylene-base counterflow diffusion flames has been investigated by measuring the volume fraction, number density, and particle size of soot by adopting the light extinction/scattering techniques. The experimental result showed that the mixing of ethane and propane in ethylene diffusion flame increased soot volume fraction while the mixing of methane decreased. As compare to the ethylene-base flame, the diameters of soot particles for mixture flames are slightly smaller. While the soot number densities for the mixture flames are much higher. Thus, the increase in the soot volume fraction can be attributed to the appreciably increased soot number density by the fuel mixing.

• Bulletin of the Korean Chemical Society
• /
• 제35권11호
• /
• pp.3303-3306
• /
• 2014

A facile and effective approach has been developed to prepare hybrid hollow microspheres, via consecutive processes of pickering mini-emulsion polymerization for core-shell formation, and calcination of the sacrificial core. The resulting hollow composite particles have mono-layered shells. The morphology and size characteristics of synthesized composite particles were investigated, using dynamic light scattering (DLS) and scanning electron microscopy (SEM) measurements.

• 대한전자공학회논문지
• /
• 제26권12호
• /
• pp.2025-2031
• /
• 1989

In this paper, using optical effect of characteristics of GaAs compound, two potential application of optical controlled GaAs MESFET are demonstrated` detector, microwave amplifier gain control. These lead to the possibility of the interaction with optical devices. The preliminary experiments show the light induced voltage, the increase in the drain currnet and the change in the microwave scattering parameters of GaAs MESFET under optical illumination(He-Ne laser). And imcrowave amplifier gain is round to be varied with changing in intensity of optical illumination.

• 한국대기환경학회지
• /
• 제22권6호
• /
• pp.863-875
• /
• 2006

Intensive visibility monitoring was conducted to investigate physical and chemical characteristics of visibility impairment by airborne pollen. Light attenuation coefficients were optically measured by a transmissometer, a nephelometer, and an aethalometer. Elemental, ionic, and carbonaceous species were chemically analyzed on the filters collected by $PM_{2.5}$ and $PM_{10}$ samplers. Aerosol size distribution was analyzed using a cascade impactor during airborne pollen period. Airborne pollen count was calculated using a scanning electron microscope. Airborne pollen was emitted into the atmosphere in springtime and funker degraded visibility through its scattering and absorbing the light. Average light extinction coefficient was measured to be $211{\pm}36Mm^{-1}$ when airborne pollen was not observed. But it increased to $459{\pm}267Mm^{-1}$ during the airborne pollen period due to increase of average $PM_{2.5}$ and $PM_{10}$ mass concentration and relative humidity and airborne pollen count concentration for $PM_{10}$, which were measured to be $46.5{\pm}29.1{\mu}g\;m^{-3},\;97.0{\pm}41.7{\mu}g\;m^{-3},\;54.1{\pm}11.6%$, and $68.2{\pm}89.7m^{-3}$, respectively. Average light extinction efficiencies for $PM_{2.5}$ and $PM_{10}$ were calculated to be $5.9{\pm}0.9$ and $4.5{\pm}0.8m^2 g^{-1}$ during the airborne pollen period. Light extinction efficiency for $PM_{10}$ increased further than that for $PM_{2.5}$. The average light extinction budget by airborne pollen was estimated to be about 24% out of the average measured light extinction coefficient during the airborne pollen period.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.268-273
• /
• 2011

In light guide panels, the PMMA sheet that is used in liquid crystal displays plays an important role in scattering the incident light and requires very fine machining as the sheet is directly related to the optical characteristics of the panels. High speed end milling(HSE) and high speed shaping(HSS) processes that are widely adopted and applied to the precise machining of light incident plane through vibration-assisted HSS for increasing the optical quality by minimizing the above-mentioned problems. The cutting tool and the tool post presented in this paper are designed by the authors to increase the magnitude of the cutting stroke by adopting the resonant frequency without weakening the stiffness and to reduce vibrations during even high speed feeding. The dynamic haracteristics of thecutting tool and the tool post are evaluated through simulation and experiment as well. The results reveal very appropriate dynamic characteristics for vibration-assisted HSS.

• 한국대기환경학회지
• /
• 제29권3호
• /
• pp.264-274
• /
• 2013

This study investigates long-term trends and characteristics of aerosol light scattering coefficient at Seoul and Baengnyeongdo in order to understand aerosol optical and radiative properties around Korea. The analysis period is limited to one year of 2011. First, the aerosol scattering coefficients (${\sigma}_{sp}$) of both sites show strong linear dependence on the $PM_{2.5}$ mass concentrations with significant correlations between both. Further, correlations and sensitivity between ${\sigma}_{sp}$ and $PM_{2.5}$ increase with relative humidity, implying both relationships are strongly dependent upon moisture amounts in the atmosphere. This study applied 3-step careful quality control procedures to the analysis of ${\sigma}_{sp}$ for the insurance of data confidence. For the relationship analysis of extinction coefficients (${\sigma}_{ext}$) to visibility and aerosol optical depth, ${\sigma}_{sp}$ observed at 3 p.m. have been used with help of aerosol absorption coefficients (${\sigma}_{ap}$) in order to remove its dependence upon relative humidity, and also those of rainy period have been excluded. As expected, ${\sigma}_{ext}$ estimated are inversely proportional to visibility observation by eye. Finally, aerosol extinction coefficients have been vertically integrated with an assumption of nearly well-mixed within an e-folding height to determine aerosol optical depth, and compared with those retrieved from sunphotometer. The results show a reasonable agreement in spite of an inherent difference of each definition. We expect these findings would help to eventually understand aerosol radiative forcing and its effect on the regional climate change around Korea.

• 폴리머
• /
• 제25권6호
• /
• pp.833-839
• /
• 2001

광산란 장치를 이용하여 메탈로센 촉매 하에 제조된 메탈로센 선형 저밀도 폴리에틸렌의 결정화거동을 Ziegler-Natta 촉매에 의하여 제조된 선형 저밀도 폴리에틸렌과 비교하여 보았다. 특히 branching수와 길이 그리고 공단량체의 함량이 결정화 거동에 미치는 영향을 중점적으로 살펴보았다. 같은 수의 branching 수를 가지고 있는 메탈로센 선형 저밀도 폴리에틸렌은 기존의 선형 저밀도 폴리에틸렌에 비하여 결정화를 시작하기 위한 induction time이 길어짐을 알 수 있으나 구정의 성장속도는 두 경우가 유사함을 확인하였다. 메탈로센 선형 저밀도 폴리에틸렌의 branching 수를 감소시킬 경우 induction time과 구정성장속도가 모두 빨라짐을 알 수 있었다. 또한 일반적으로 최대 구정의 크기는 branching 수에 관계없이 메탈로센 선형 저밀도 폴리에틸렌이 기존의 선형 저밀도 폴리에틸렌에 비하여 커짐을 알 수 있었다.