Development on Tool Holder of Vibration Cutting System for Ultraprecision Machining

초정밀 가공을 위한 진동절삭 시스템의 Tool holder 개발 및 평가

  • 이세윤 (부산대학교 기계공학부 대학원) ;
  • 한준안 (부산대학교 기계공학부) ;
  • 김지운 (부산대학교 기계공학부) ;
  • 곽용길 (부산대학교 기계공학부) ;
  • 강동배 (부산대학교 기계공학부) ;
  • 안중환 (부산대학교 기계공학부)
  • Received : 2010.12.06
  • Accepted : 2011.01.27
  • Published : 2011.06.15

Abstract

In light guide panels, the PMMA sheet that is used in liquid crystal displays plays an important role in scattering the incident light and requires very fine machining as the sheet is directly related to the optical characteristics of the panels. High speed end milling(HSE) and high speed shaping(HSS) processes that are widely adopted and applied to the precise machining of light incident plane through vibration-assisted HSS for increasing the optical quality by minimizing the above-mentioned problems. The cutting tool and the tool post presented in this paper are designed by the authors to increase the magnitude of the cutting stroke by adopting the resonant frequency without weakening the stiffness and to reduce vibrations during even high speed feeding. The dynamic haracteristics of thecutting tool and the tool post are evaluated through simulation and experiment as well. The results reveal very appropriate dynamic characteristics for vibration-assisted HSS.

Keywords

References

  1. Shamoto, E., and Moriwaki, T., 1999, "Ultraprecision Diamond Cutting of Hardned Steel by Applying Elliptical Vibration Cutting," Annals of the CIRP, Vol. 48, pp. 441-444. https://doi.org/10.1016/S0007-8506(07)63222-3
  2. Nath, C., and Rahman, M., 2008, "Effect of machining parameters in Ultrasonic Vibration Cutting," International Journal of Machine Tools and Manufacture, Vol. 48, pp. 965-974. https://doi.org/10.1016/j.ijmachtools.2008.01.013
  3. Mostofa, M. G., Noh, J. H., Kim, H. Y., Ahn, J. H., and Kang, D. B., 2010, "Tooling Device Design for Vibration-assisted High Speed Shaping of PMMA," Journal of Mechanical Science and Technology, Vol. 24, pp. 1623-1629. https://doi.org/10.1007/s12206-010-0527-9
  4. Noh, J. H., 2009, Increasing the precision of optical part's surface quality using vibration cutting, Thesis for the degree of Master of Science, Pusan National University, Republic of Korea.