• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.77-86
• /
• 2005

The DC protection and control device for the feeding system of a Light Rail Transit(LRT) system is developed. For the development, the short circuit characteristics in the system are analyzed. As a result a protection algorithm for the DC fault selective relay (50F) is newly proposed, and principles of the DC fault selective relay, Line Test Device (LTD), DC Over Current Relay (DC OCR) are introduced From the development, the specifications and codes used to be unclear have become clarified and summarized. Moreover, the methods to examine the protective characteristics and Electromagnetic Compatibility (EMC) are established Finally, the performance and the effectiveness of the developed protective relay have been verified with the test based on IEC. For the reliability of the system, the relay has been installed and is being operated at the test track of the LRT system at Gyeong-San.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.745-752
• /
• 2011

Light Rail Vehicle(LRT) is "New Transit System" that has transportation capacity as well as physical size of vehicle is in-between bus and subway. The demand of LRT system is increasing rapidly; both domestically and internationally. Reason being is that it is more economical and eco-friendly compare to existing heavy rail vehicle. Especially, Busan Subway Line 4 K-AGT (Rubber-tired LRT) being the first of its kind to start revenue service in Korea, it is very much likely that application of its demand will continue to increase. Considering its trend, study to reduce implementation cost of LRT is being pursued in many different aspects; reducing construction cost is one that aspect. In this study, on-site application of 'Up-Down Turnout System' implementation research has been carried out which can replace existing 'Left-Right Turnout System'. When safety of its type gets verified, application of this system to line which intends to use K-AGT, Shin-Lim Line and Dong-Book Line, expects to save its construction cost. This thesis paper reports ongoing research of AGT 'Up-Down Turnout System' development and main component design factors, fundamental principle, performance test result.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.129-136
• /
• 1998

The LIM can be used as a transport system with wheel structure. The structural tolerance cause the airgap unbalance and that effects on the LIM performance. The effect of airgap unbalance on the motor performance such as thrust force, velocity and armature current are investigated by using Finite Element Analysis (FEA). From this numerical works, it is known that the airgap unbalance almost does not effect on the motor performance and LIM for transport system is robust to the structural tolerance.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.1
• /
• pp.77-86
• /
• 2016

Purpose : When a radiation treatment, there is an attenuation by Carbon Fiber Couch. In this study, we tried to evaluate the usability of the Varian Standard Couch(VSC) by modeling with Treatment Planning System (TPS) Materials and Methods : VSC was scanned by CBCT(Cone Beam Computed Tomography) of the Linac(Clinac IX, VARIAN, USA), following the three conditions of VSC, Side Rail OutGrid(SROG), Side Rail InGrid(SRIG), Side Rail In OutSpine Down Bar(SRIOS). After scan, the data was transferred to TPS and modeled by contouring Side Rail, Side Bar Upper, Side Bar Lower, Spine Down Bar automatically. We scanned the Cheese Phantom(Middelton, USA) using Computed Tomography(Light Speed RT 16, GE, USA) and transfer the data to TPS, and apply VSC modeled previously with TPS to it. Dose was measured at the isocenter of Ion Chamber(A1SL, Standard imaging, USA) in Cheese Phantom using 4 and 10 MV radiation for every $5^{\circ}$ gantry angle in a different filed size($3{\times}3cm^2$, $10{\times}10cm^2$) without any change of MU(=100), and then we compared the calculated dose and measured dose. Also we included dose at the $127^{\circ}$ in SRIG to compare the attenuation by Side Bar Upper. Results : The density of VSC by CBCT in TPS was $0.9g/cm^3$, and in the case of Spine Down Bar, it was $0.7g/cm^3$. The radiation was attenuated by 17.49%, 16.49%, 8.54%, and 7.59% at the Side Rail, Side Bar Upper, Side Bar Lower, and Spine Down Bar. For the accuracy of modeling, calculated dose and measured dose were compared. The average error was 1.13% and the maximum error was 1.98% at the $170^{\circ}beam$ crossing the Spine Down Bar. Conclusion : To evaluate the usability for the VSC modeled by TPS, the maximum error was 1.98% as a result of compassion between calculated dose and measured dose. We found out that VSC modeling helped expect the dose, so we think that it will be helpful for the more accurate treatment.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.9
• /
• pp.620-627
• /
• 2015

Long continuous bridge deck can become contracted considerably as temperature drops, which can lead to a large expansion of sleeper span at the end of it. Since this huge sleeper span then can cause problems both with safety of train operation and structural stability of tracks, it is necessary to take the issue into consideration systematically in the designing process of the bridge. In this paper, an evaluation process through the analysis of train-track interaction was presented which can basically review the effects of the expansion of sleeper span at the end of long continuous bridge deck on the safety of the train and the structural stability of the track. The analyses of the interaction between the light rail train and tracks were carried out targeting the sleeper span as a main parameter. The safety of train operation and structural stability of tracks in a light rail system due to the expansion of the sleeper span were evaluated by comparing the numerical results with the related criteria.

• Journal of the Korean Society for Railway
• /
• v.15 no.5
• /
• pp.442-446
• /
• 2012

This paper is a practical study on the development of SEMP template using SE & SW infrastructures. SEMP, which is a management system for systems engineers, has been developed for the LRT(Light Rail Transit) industry and has been tailored to suit domestic conditions. SE & SW infrastructures were developed to assist in creating an effective and efficient SEMP for the industry of this study. This paper proposes a method to reduce costs, manpower, and time for the LRT industry using SEMP based on SE & SW infrastructures.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2D
• /
• pp.183-187
• /
• 2012

This study is to prepare the emergency response procedures for an unmanned LRT (Light Rapid Transit) which is being commercially operated recently. This emergency response procedure adds several particular characteristics which happens in the hardware and software aspects at the unmanned LRT in addition to the present emergency response procedures. The emergency response procedure has to conform to the emergency response planning. For doing that this emergency response procedure includes three important sub systems. First of all, the functional emergency response system has been developed. Secondly, Standard Operation Procedure (SOP) is suggested for the better and faster emergency response between emergency response personnel and institutes. Thirdly, emergency response training and drilling system is also provided for emergency response personnel. Finally, a software program for emergency response training and drilling will be developed and suggested to be used for the emergency response personnel.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.107-111
• /
• 2008

This paper presented a literature review and investigation analysis results of total 19 present guide book and provisions of maintenance and management system in existing railway bridges to development of urban maglev track structures inspection manual. This research carried out a cooperated research subject 3-1, development a design code and maintenance and management inspection manual for urban maglev track structures, of the Center for Urban Maglev Program. Three types of track structures were includes as a major analytical parameter together with railroad, high speed railroad, subway and light rail transit. Bridges were analyzed a general rules, investigation, evaluation, repair and strengthen method as a key aspect. And rail were analyzed examination and maintenance also. This analysis results show that the track structures evaluation are based on the test and examination results, and repaired or strengthened consideration of deterioration, track irregularity and materials according to provision requirements.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1803-1806
• /
• 2008

Various efforts of reducing the green house gas in the whole industrial fields including railway industry have been implemented. Tilting train is the key example because it can run more faster on the existing rail than others due to its composite body. The system has an advantage of light weight but also a task to solve, recycling of composite material. To recycle the CFRP(Carbon Fiber Reinforced Plastic), there are two typical methods; chemical and thermal method. In this study, more environmentally friendly recycling method was recommended through the environmental function through comparing both recycling methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.10
• /
• pp.77-83
• /
• 2008

In terms of saving costs, energy and materials, the weight of cars has been gradually reduced by optimizing design of structure, which also gives us good performance. In compliance with this, it should satisfy the lifetime of cars for 25 years under the operation. The purpose of this study is to evaluate the strength of fatigue using date from strain gauges attached carbody and bogie frame. This dynamic stress can be evaluated using S-N curve based on stress amplitude. Modified S-N curve by CORTON-DOLAN is used for more conservative and substantial evaluation. In addition, !he loadings itself of carbody and bogie frame are considered by calculating the rate of the differences which are occurred between empty car and fuiiy occupied car with passengers. Rainflow cycle counting method is applied to arrange the stress data for the modified S-N curve to predict lifetime of the materials. Conclusively the cumulative damages are not only calculated by Miner's Rule, but the safety factors are also determined by Goodman diagram.