• 자원리싸이클링
• /
• 제27권3호
• /
• pp.8-15
• /
• 2018

Nd-Fe-B 폐 영구자석으로부터 회수한 염화희토류용액을 PC88A에 의한 경희토류(Pr, Nd)/중희토류(Tb, Dy) 분리정제에 대한 용매추출 연구를 진행하였다. 회분식 실험 단계에서 추출제(PC88A) 농도 0.5 M, 추출 후 평형 pH는 0.8~1.0(feed의 초기 pH 1.3), 세정액(HCl)의 농도는 0.1 M, 탈거액(HCl)의 농도는 2 M 이상일 때 분리 효율이 좋은 것을 확인하였다. 이 결과값을 혼합침강조에 적용하여 초기 조건에서 운용 조건을 변화시키면서 180시간 운용하여 3N급의 경희토류(Pr, Nd)/중희토류(Tb, Dy)금속 이온으로 분리정제 후 회수하였다.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.7-10
• /
• 2022

A functional polyethylene terephthalate substrate to increase light extraction efficiency of organic light-emitting diodes is studied. We formed nano-structured PET surfaces by controlling the power, gas, and exposure time of the linear ion-beam. The haze of the polyethylene terephthalate can be controlled from 0.2% to 76.0% by changing the peak-to-valley roughness of nano structure by adjusting the exposure cycle. The treated polyethylene terephthalate shows average haze of 76.0%, average total transmittance of 86.6%. The functional PET increases the current efficiency of organic light-emitting diodes by 47% compared to that of organic light-emitting diode on bare polyethylene terephthalate. In addition to polyethylene terephthalate with light extraction performance, by conducting additional research on the development of functional PET with anti-reflection and barrier performance, it will be possible to develop flexible substrates suitable for organic light-emitting diodes lighting and transparent flexible displays.

• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.205-210
• /
• 2022

본 연구에서는 유기 발광 다이오드(OLED)의 광추출 향상을 위한 롤투롤 마이크로컨택(mCP)방식으로 인쇄된 마이크로렌즈 어레이(MLA)를 제시하였다. 상업적으로 사용되는 마이크로렌즈 어레이를 템플레이트로 사용하여서 polydimethylpolysiloxane(PDMS)를 롤스탬프로 제작하였다. 낮은 끓는 점을 가지는 불소화 잉크로부터 PDMS 롤스탬프에 고분자 박막을 형성하고 이를 OLED의 하부면에 고압·고온 처리 없이 인쇄하였다. 최적화된 농도를 찾아서 템플레이트로 사용된 MLA와 거의 동일한 모양의 패턴을 성공적으로 인쇄하였다. 마이크로컨택 방식으로 인쇄된 MLA의 구조와 소재의 낮은 흡수도로 인해서 OLED의 외부양자효율이 18% 향상되었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권4호
• /
• pp.980-997
• /
• 2024

To improve the brightness of images and reveal hidden information in dark areas is the main objective of low-light image enhancement (LLIE). LLIE methods based on deep learning show good performance. However, there are some limitations to these methods, such as the complex network model requires highly configurable environments, and deficient enhancement of edge details leads to blurring of the target content. Single-scale feature extraction results in the insufficient recovery of the hidden content of the enhanced images. This paper proposed an edge detection-based multi-scale feature enhancement network for LLIE (EDMFEN). To reduce the loss of edge details in the enhanced images, an edge extraction module consisting of a Sobel operator is introduced to obtain edge information by computing gradients of images. In addition, a multi-scale feature enhancement module (MSFEM) consisting of multi-scale feature extraction block (MSFEB) and a spatial attention mechanism is proposed to thoroughly recover the hidden content of the enhanced images and obtain richer features. Since the fused features may contain some useless information, the MSFEB is introduced so as to obtain the image features with different perceptual fields. To use the multi-scale features more effectively, a spatial attention mechanism module is used to retain the key features and improve the model performance after fusing multi-scale features. Experimental results on two datasets and five baseline datasets show that EDMFEN has good performance when compared with the stateof-the-art LLIE methods.

• 한국광학회지
• /
• 제16권3호
• /
• pp.275-286
• /
• 2005

InGaN LED에서 칩 구조 및 칩마운트 구조에 따른 광추출효율의 변화를 Monte Calo 기법을 이용하여 해석하였다. Simulation을 통해 얻은 중요한 결론의 하나는, InGaAlP 또는 InGaN/SiC LED의 경우에서는 달리, InGaN/sapphire LED의 경우 칩의 측 벽면 기울임 기법의 광추출효율 개선효과가 상대적으로 미미하다는 점이다. InGaN/SiC LED의 경우와는 달리, 기판으로 사용되는 sapphire의 굴절률이 상대적으로 작아서 생성된 광자들이 기판으로 넘어가는데 전반사장벽을 만나게 되어, 많은 광자들이 기판으로 넘어가지 못하고 두께가 매우 얇은 반도체 결정층에 갇히는 현상 때문이다. 동일한 현상은 epi-down 구조의 칩 마운트에서 광추출효율이 크게 개선되지 못하는 원인으로도 작용하게 된다. 광추출효율 관점에서의 epi-down 구조의 InGaN/sapphire LED가 갖고 있는 잠재력을 살리기 위한 방법의 하나는 기판-에피택시 계면을 texturing 하는 것이라고 할 수 있는데, 이 경우 생성된 광자들이 다량기판으로 넘어갈 수 있게 되어 광추출효율이 현저하게 개선된다.

• International journal of advanced smart convergence
• /
• 제10권2호
• /
• pp.45-52
• /
• 2021

The surveillance camera market has developed and plays an important role in the field of video surveillance. However, in recent years, the identification of areas requiring surveillance has been limited by reflective light in the surveillance camera market. Cameras using polarization filters are being developed to reduce reflective light and facilitate identification. Programs are required to automatically adjust polarization filters. In this paper, we proposed an optimal angle extraction method from surveillance cameras using polarization filters through histogram analysis. First of all, transformed to grayscale to analyze the specifications of frames in multiple polarized angle images, reducing computational throughput. Then we generated and analyzed a histogram of the corresponding frame to extract the angle when the highlights are the fewest. Experiments with 0˚ and 90˚ showed high performance in extracting optimal angles. At this point, it is hoped this technology would be used for surveillance cameras in place like beach with a lot of reflective light.

• 한국재료학회지
• /
• 제29권1호
• /
• pp.59-64
• /
• 2019

This study investigates the optical characteristics of InGaN multiple quantum wells(MQWs) light emitting diodes(LEDs) on planar sapphire substrates(PSSs), nano-sized PSS(NPSS) and micro-sized PSS(MPSS). We obtain the results as the patterning size of the sapphire substrates approach the nanometer scale: The light from the back side of the device increases and the total light extraction becomes larger than the MPSS- and planar-LEDs. The experiment is conducted by Monte Carlo ray-tracing, which is regarded as one of the most suitable ways to simulate light propagation in LEDs. The results show fine consistency between simulation and measurement of the samples with different sized patterned substrates. Notably, light from the back side becomes larger in the NPSS LEDs. We strongly propose that the increase in the light intensity of NPSS LEDs is due to an abnormal optical distribution, which indicates an increase of extraction probability through NPSS.

• 한국염색가공학회지
• /
• 제9권3호
• /
• pp.10-17
• /
• 1997

The study was performed to obtain the optimum extraction conditions for crocin from gardenia fructus. Generally crocin is unstable on heat, light, acid and base solution. The extraction efficiency of crocin from gardenia depended upon the extraction time, extraction temperature, pH in the extraction bath and the optimum conditions of crocin extraction were determined as 60 minutes of extraction time, 4$0^{\circ}C$ of extraction temperature, pH 7 of extraction bath. The molar extinction coefficient of crocin was 12,515 and the color yield of purified crocin was about six times higher than that of non-purified crocin. The heat-stability at extraction temperature and lightstability in irradiation with xenon lamp for one hour of the purified crocin were higher than those of non-purified crocin. Intensity of &{\lambda}_{max}&of crocin was decreased by irradiation for one hour but UV-Vis. spectra of crocin was not changed. The colors of purified and non-purified crocin dissolved wit methanol was evaluated by means of CIE L* a* b* system.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.21-21
• /
• 2003

To increase the light-emission efficiency of LED, we increased the internal and external quantum efficiency by suppressing the defect formation in the quantum well and by increasing the light extraction efficiency in LED, respectively. First, the internal quantum efficiency was improved by investigating the effect of a low temperature (LT) grown p-GaN layer on the In$\sub$0.25/GaN/GaN MQW in green LED. The properties of p-GaN was optimized at a low growth temperature of 900oC. A green LED using the optimized LT p-type GaN clearly showed the elimination of blue-shift which is originated by the MQW damage due to the high temperature growth process. This result was attributed to the suppression of indium inter-diffusion in MQW layer as evidenced by XRD and HR-TEM analysis. Secondly, we improved the light-extraction efficiency of LED. In spite of high internal quantum efficiency of GaN-based LED, the external quantum efficiency is still low due to the total internal reflection of the light at the semiconductor-air interface. To improve the probability of escaping the photons outside from the LED structure, we fabricated nano-sized cavities on a p-GaN surface utilizing Pt self-assembled metal clusters as an etch mask. Electroluminescence measurement showed that the relative optical output power was increased up to 80% compared to that of LED without nano-sized cavities. I-V measurement also showed that the electrical performance was improved. The enhanced LED performance was attributed to the enhancement of light escaping probability and the decrease of resistance due to the increase in contact area.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.582-588
• /
• 2014

We study polarization-dependent spontaneous emission (SE) rate and light extraction efficiency (LEE) in localized-surface-plasmon (LSP)-coupled light emitting diodes (LEDs). The closely packed seven $Ag/SiO_2$ core-shell (CS) nanoparticles (NPs) lie on top of the GaN surface for LSP coupling with a radiated dipole. According to the dipole direction, both the SE rate and the LEE are significantly modified by the LSP effect at the $Ag/SiO_2$ CS NPs when the size of Ag, the thickness of $SiO_2$, and the position of the dipole source are varied. The enhancement of the SE rate is related to an induced dipole effect at the Ag, and the high LEE is caused by light scattering with an LSP mode at $Ag/SiO_2$ CS NPs. We suggest the optimum position of the quantum well (QW) in blue InGaN/GaN LEDs with $Ag/SiO_2$ CS NPs for practical application.