• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.13-16
• /
• 2004

Deep sea water has mid temperature, abundant nutrients and minerals, and good tooter quality. For the purpose of drawing up deep sea water without pump pit construction, tile authors are considering to use air-lift pump. This report describes fundamental experimental investigation for air-lift pump characteristic and improvement in efficiency.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.7-14
• /
• 2004

The lift-off characteristics of the triple flame have been studied experimentally with various mean velocities and concentration gradients using a multi-slot burner, which can control the concentration gradient and the mean velocity independently, Lift-off height, axial maximum velocity, flame temperature, and some other characteristics were examined for methane and propane flame, It was found that minimum values of the lift-off heights exist at a certain concentration gradient for constant mean velocity, and this result implies that the propagation velocity has a maximum value at this condition, OH radical distribution was measured with LIF method and velocity variation along streamline was measured with PlV system. In addition maximum temperature along streamline was measured with CARS system. The intensity of the diffusion flame affects on the propagation velocity of triple flame in the region of very weak concentration gradient.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.529-533
• /
• 2001

NDI technique system using AC current is newly developed for inspection of defects. This technique is non-contact measurement system and can be applied for locating and sizing of surface defects in components. In this paper, the technique was applied for evaluating the location and size for 2-dimensional surface cracks and we had investigated the influence of frequency and lift-off. The results show that defects are able to detect with the variety of voltage, and the measuring voltage for the depth of defects are under the influence of the measuring frequency and the lift-off.

• 한국건설관리학회논문집
• /
• 제5권1호
• /
• pp.133-139
• /
• 2004

최근 도심지 고층건축공사가 증가하면서 건설자원의 효율적인 관리가 중요시되고 있으나 현재 국내 건설현장에서 건설자재의 공급에 대한 많은 문제점을 가지고 있다. 공정과 연계되지 못한 자재의 조달 및 양중은 현장 내 재고 증가 및 작업지연을 유발하며, 복잡한 정보전달 체계는 관련 작업의 의사결정의 지연의 원인으로 작용하여 결과적으로 공사기간에 절대적인 영향을 미치고 있다. 따라서 공정진행을 고려한 조달 및 양중작업에서 각 공사담당자간의 효율적인 정보전달 체계의 구축은 효과적인 공사수행을 위해 필수적이다. 본 연구에서는 사례조사를 통해 건설자재의 조달 및 양중작업의 문제점을 분석하여 가치흐름분석을 통해 구체적인 낭비요소를 추출한 뒤, 공사참여자간의 의사소통 체계를 구축 및 양중계획 업무흐름 개선방안을 제시하였다. 개선방안은 web을 기반으로 한 조달 및 양중시스템의 전반적인 체계로서 활용될 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.331-336
• /
• 2008

Magnetic path direction in the back-iron of a linear induction motor(LIM) is perpendicular to that of the lift-magnet of the MAGLEV which is recently developing in KOREA. In general the back-iron is isolated magnetically in conventional rail in order to eliminate the thrust dependency of the LIM on the lift force. However the magnetic isolation causes some increase in construction and management cost. So a unit-type rail system is considered, which the magnetic circuit of the back-iron is sharing that of the lift-magnet. In this paper 3-dimensional analysis for the lift-magnet is carried out using finite element method. As a result, a new shape of the unit-type rail is presented to reduce the magnetic dependency between thrust force and lift force. Also the distribution of magnetic flux density vectors and current-lift force characteristics are presented.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권2호
• /
• pp.241-249
• /
• 2008

In this study, lateral vibration analysis has been conducted on a propulsion and lift shafting system for an air cushion vehicle using ANSYS code. The shafting system is totally flexible multi-elements system including air propeller, aluminum alloy of lift fan and thin walled shaft with flexible coupling. The analysis included the lateral natural frequencies, mode shapes and harmonic analysis of the shafting system taking into account three-dimensional models for propulsion and lifting shaft system. In case of ACV the yawing and pitching rate of craft will be quite high. During yawing and pitching of craft significant gyroscopic moment will be applied to the shafting and will generate high amplitude of lateral vibration. So, such a shafting system has very intricate lateral vibrating characteristics and natural frequencies of shafting must be avoided in the range of operating revolution. The control of lateral vibration is included in this study.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권4호
• /
• pp.335-342
• /
• 2007

A propulsion and lift shafting system in an air cushion vehicle is flexible multi-elements system which consists of two aeroderivative gas turbines with own bevel gears, four stage lift fan reduction gear, two stage propulsion reduction gear air propellers and high capacity of lifting fans. In addition, the system includes the multi-branched shafting with multi-gas turbine engines and thin walled shaft with flexible coupling. Such a branched shafting system has very intricate vibrating characteristics and especially, the thin walled shaft with flexible couplings can lower the torsional natural frequencies of shafting system to the extent that causes a resonance in the range of operating revolution. In this study, to evaluate vibrational characteristics some analytical methods for the propulsion and lift shafting system are studied. The analysis, including natural frequencies and mode shapes, for five operation cases of the system is conducted using ANSYS code with a equivalent mass-elastic model.

• 한국전자파학회논문지
• /
• 제22권11호
• /
• pp.1125-1132
• /
• 2011

본 연구의 목적은 전자파 적합성을 고려하여 승강기 시스템 내에 중계기 안테나를 설치하는 방안을 제안하는 것이다. 승강로에 중계기 안테나를 설치하는 경우(Solution 1)와 승강기 내부에 중계기 안테나를 설치하는 경우 (Solution 2)의 2가지 solutions을 검토하였으며, Solution 2가 Solution 1보다 효과적임을 확인하였다. 또한, 승강기에 대한 전자파 내성 기술 기준과 20 dB의 안전 마진을 고려하여 중계기 안테나의 출력(EIRP)을 -5 dBm으로 제한할 것을 제안하였으며, 이러한 출력은 이동 통신 시스템의 정밀 전력 제어 메커니즘에 따라 최적의 안정된 전자파 환경을 제공함을 확인하였다. 이러한 접근은 무선을 활용하여 오히려 전자파 환경을 개선할 수 있음을 보여준 본 연구가 Green ICT의 중요한 사례가 될 수 있다.

• KSBB Journal
• /
• 제21권2호
• /
• pp.103-109
• /
• 2006

H. erinaceum의 기능성 소재화 연구의 일환으로, 지금까지 체계적으로 연구된 바 없는 H. erinaceum의 액체배양을 시도하고. 이 버섯의 서로 다른 생물반응기하의 액체배양 특성을 규명하고 대량생산을 검토하였다. 5 L 용량의 jar fermenter와 air-lift fermenter에서의 액체배양의 비교실험을 통해 air-lift fermenter의 사용이 종균 배양에 적합한 것으로 나타났으며, 형태 분석을 통해 적정 크기($2{\sim}4mm$)의 pellet 형태의 유지가 대량 생산의 중요인자인 것을 규명하였다. Air-lift fermenter 하의 배양을 종균으로 하고, 적정 크기의 pellet을 유지하는 500 L까지의 jar fermenter를 사용한 회분 배양의 scale-up 실험결과, 30 및 500 L에서의 교반 및 통기속도는 각각 200 rpm, 1 vvm 및 150 rpm, 1 vvm이었다. 이 조건하에서 배양의 전 기간 중 적정 pellet을 유지하였으며, 최대 균사체량은 약 $13{\sim}14g/L$이었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.441-446
• /
• 2011

To investigate aerodynamic performance of high-lift devices, 2D design is the base of the success of high-lift system design for transport aircraft, which can shorten the periods of three-dimensional design and analysis. For the simulation coupled viscous and inviscous euler method (MSES) is used. In this parametric study, Gap and Overlap which can define position of flap is used as design variables and we investigale relation between angle of attack and flap position for lift enhancement.