• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.3135-3147
• /
• 1993

A numerical method is presented which can solve the steady flow and heat transfer from a rotating and heated circular cylinder in a uniform flow for a range of Reynolds number form 5 to 100. The steady response of the flow and heat transfer is simulated for various spin parameter. The effects on the flow field and heat transfer characteristics known as lift, drag and heat transfer coefficient are analyzed and the streamlines, velocity vectors, vorticity, temperature distributions around it were scrutinized numerically. As spin parameter increases the region of separation vortex becomes smaller than upper one and the lower region will vanish. The lift force, a large part is due to the pressure force, increases as the Reynolds number and it increases linearly as spin parameter increases. The pressure coefficient changes rapidly with spin parameter on the lower surface of the cylinder and the vorticity is sensitive to the spin parameter near separation region. As spin parameter increases the maximum heat coefficient and the thin thermal layer on front region are moved to direction of rotation. However, with balance between the local increase and decrease, the overal heat transfer coefficient is almost unaffected by rotation.

• 대한조선학회논문집
• /
• 제42권1호
• /
• pp.24-33
• /
• 2005

It is important to understand the flow characteristics around two sails of a sloop yacht. In this paper a computational aerodynamic investigation is performed over sail-like airfoils similar to the main and iIb sails of a 30 feet sailing yacht. Lift and drag are calculated for various conditions of slit distance between the two sails and overlapped length of the jib sail. The thrust and CE(center of effort) of the sail system are obtained. It is found that the combination of two sails produces the thrust force larger than the sum of the thrust force of each sail standing separately and the slit distance of the two sails are important factor to increase lift force.

• 한국자기학회지
• /
• 제8권5호
• /
• pp.308-316
• /
• 1998

본 연구에서는 부상에 필요한 소비전력을 최소화 할 수 있고, 부상력과 추진력을 동시에 얻을 수 있는 제어-영구자석형 선형동기전동기에 대하여 횡변위가 기기의 추진력, 부상력, 안내력에 미치는 영향을 3차원 유한요소해석을 통하여 검토하였다. 횡변위에 대한 공극자속밀도의 분포특성과 힘 특성의 변화에 대하여 검토하고 횡변위 및 공극 길이의 변화가 기기의 특성에 미치는 영향에 대하여 해석과 실험을 통하여 분석하였다. 본 연구결과 횡변위 및 공극의 변화가 제어-영구자석형 선형동기 전동기의 특성에 미치는 영향을 정량적으로 알 수 있었다.

• 대한기계학회논문집B
• /
• 제24권3호
• /
• pp.477-484
• /
• 2000

Microcontamination caused by particle deposition on the head disk interface threatens the reliability of hard disk drive. Design of slider rail to control contamination becomes an important issue in magnetic recording. In this paper, how particles adhere to the slider and the disk is examined. To investigate accumulation mechanism of the particles, trajectory of the particles in a slider/disk interface is simulated with considering various forces including drag force, gravitational force, Saffman lift force, and electrostatic force. It is found that the charged particles can easily adhere to the slider or disk surface, if an electric field exists between the slider and the disk. It is supposed that the vertical motion of the particles should be related with not only Saffman force but also electrostatic force.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권1호
• /
• pp.125-133
• /
• 2006

It is important to understand flow characteristics and performances of sails for both sailors and designers who want to have efficient thrust of yacht In this Paper the viscous flows around sail-like rigid wings, which are similar to main and jib sails of a 30 feet sloop, are calculated using a CFD tool. Lift, drag and thrust forces are estimated for various conditions of gap distance between the two sails and the center of effort of the sail system is obtained. Wind tunnel experiments are also carried out to measure aerodynamic forces acting on the sails system and to validate the computation. It is found that the combination of two sails produces the lift force larger than the sum of that produced separately by each sail and the gap distance between the two sails is an important factor to determine total lift and thrust.

• 대한기계학회논문집B
• /
• 제28권4호
• /
• pp.486-492
• /
• 2004

Flow patterns around a rotating circular cylinder having square dimpled surface were visualized by the hydrogen bubble technique at velocity ratios from a=0 to 4.8 and Reynolds number of Re=1.0${\times}$10$^4$. The wake region of the cylinder was reduced as the velocity ratios increase and was smaller than that of the smooth cylinder without dimples at the same velocity ratio. The hydrodynamic characteristics on the cylinder was investigated by measuring of lift and drag at velocity ratios from a=0 to 4.1 and Reynolds number from Re=1.2${\times}$10$^4$ to Re=2.0${\times}$10$^4$. As the velocity ratios increase, the average lift and drag coefficients were increased and at the same velocity ratio, the average lift was larger but the average drag was smaller than that of the smooth cylinder.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1925-1928
• /
• 1996

In this work, the behavior of conducting wire type particles existing inside the cylinder type coaxial electrode has been systematically investigated by charge simulation method and electrostatic force analysis from the view point of the acquired charging before being lifted off into the gap under the high ac voltage. Spheroidal charge are adopted as a image charge for the CSM analysis in order to calculate the acquired charges of the particles which are erected on the surface of the outer electrode. For this purpose, different material of the particle and their lengths and diameters have been considered in view to calculate their lift-off field, acquired charge and to understand their effect on the lift-off voltage. The results imply that the particle lengths and diameter have an different influence on the particle behavior in GIS system.

• 대한기계학회논문집B
• /
• 제33권11호
• /
• pp.886-893
• /
• 2009

To develop glass panel vacuum lift system for the post process in module line of FPD(Flat panel display) such as LCD and PDP, new vacuum adsorption parts of this system are proposed. These parts are composed of variable geometry configurations utilizing ceramic porous medium for variable size of glass panels. In order to design this device, detail understanding of flow phenomena in the flow path of vacuum adsorption system is essential. Thus, CFD analysis and designs are performed for several configurations in terms of pressure drop and balancing force at the adsorption side. From the result, new configuration is recommended for optimum design and manufacturing purpose.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.832-839
• /
• 2005

It is important to understandflow characteristics and performances of sailsfor both sailors and designers who want to have efficient thrust of yacht. In this paper the viscous flows around sail-like rigid wings, which are similar to main and jib sails of a 30 feet sloop, are calculated using a CFD tool. Lift, drag and thrust forces are estimatedfor various conditions of gap distance between the two sails and the center of effort of the sail system is obtained. Wind tunnel experiments are also carried out to measure aerodynamic forces acting on the sail system and to validate the computation. It is found that the combination of two sails produces the lift force larger than the sum of that produced separately by each sail and the gap distance between the two sails is an important factor to determine total lift and thrust.

• Transactions on Electrical and Electronic Materials
• /
• 제11권4호
• /
• pp.190-193
• /
• 2010

This report covers an effective fabrication method of graphene nanoribbon for top-gated field effect transistors (FETs) utilizing electron beam lithography with a bi-layer resists (XR-1541/poly methtyl methacrylate) process. To improve the variation of the gating properties of FETs, the residues of an e beam resist on the graphene channel are successfully taken off through the combination of reactive ion etching and a lift-off process for the XR-1541 bi-layer. In order to identify the presence of graphene structures, atomic force microscopy measurement and Raman spectrum analysis are performed. We believe that the lift-off process with bi-layer resists could be a good solution to increase gate dielectric properties toward the high quality of graphene FETs.