• Wind and Structures
• /
• 제36권1호
• /
• pp.1-14
• /
• 2023

To evaluate the wind shielding effect of bridge towers with multiple limbs on high-speed trains, a wind tunnel test was conducted to investigate the aerodynamic characteristics of vehicles traversing multi-limb towers, which represented a combination of the steady aerodynamic coefficient of the vehicle-bridge system and wind environment around the tower. Subsequently, the analysis model of wind-vehicle-bridge (WVB) system considering the additional moments caused by lift and drag forces under nonuniform wind was proposed, and the reliability and accuracy of the proposed model of WVB system were verified using another model. Finally, the factors influencing the wind shielding effect of multi-limb towers were analyzed. The results indicate that the wind speed distributions along the span exhibit two sudden changes, and the wind speed generally decreases with increasing wind direction angle. The pitching and yawing accelerations of vehicles under nonuniform wind loads significantly increase due to the additional pitching and yawing moments. The sudden change values of the lateral and yawing accelerations caused by the wind shielding effect of multi-limb tower are 0.43 m/s² and 0.11 rad/s² within 0.4 s, respectively. The results indicate that the wind shielding effect of a multi-limb tower is the controlling factor in WVB systems.

• 한국가시화정보학회지
• /
• 제21권2호
• /
• pp.83-90
• /
• 2023

The shape of an airfoil is a critical factor in determining aerodynamic characteristics such as lift and drag. Aerodynamic properties of an airfoil have a decisive impact on the performance of various engineering applications, including airplane wings and wind turbine blades. Therefore, it is essential to analyze the aerodynamic characteristics of airfoils. Various analytical tools such as experiments, computational fluid dynamics, and Xfoil are used to perform these analyses, but each tool has its limitation. In this study, airfoil parameterization, image recognition, and artificial intelligence are combined to overcome these limitations. Image and coordinate data are collected from the UIUC airfoil database. Airfoil parameterization is performed by recognizing images from image data to build a database for deep learning. Trained model can predict the aerodynamic characteristics not only of airfoil images but also of sketches. The mean absolute error of untrained data is 0.0091.

• KSBB Journal
• /
• 제14권1호
• /
• pp.119-123
• /
• 1999

Polyester 감량폐수의 주성분 중 물리.화학적 처리가 어려운 EG를 생물학적으로 처리하기 위하여 jet-loop reactor를 사용하였다 Jet-loop reactor의 산소전달계수는 air-lift reactor와 비교하여 훨씬 컸다. 합성 polyester 감량폐수를 사용하여 부하율 2.64 $kgCOD_{Mn}/m^3$.day, 3.07$kgCOD_{Cr}/m^3$.day로 처리한 경우 유출수의 농도는 154 $mgCOD_{Mn}/L$, 156$mgCOD_{Mn}/L$이었으며, 이 때 각각 93, 93.9%의 제거율을 나타내었다. $COD_{Mn}$의 비부하 속도가 0.25에서 1.72$kgCOD_{Mn}/kgMLVSS$.day로 증가 함에 따라 비기질제거 속도는 0.25에서 1.60$kgCOD_{Mn}-removed/kgMLVSS$.day로 선형적으로 증가하였다. 그리고, 동력학적 계수 Y는 0.78,$K_d$는 0.1$day^{-1}$, $K_s$는 89mg/L는 k는 0.05$hr^{-1}$이었다. 실제 polyester 감량폐수를 사용하여 부하율 2.64$kgCOD_{Mn}/m^3$.day,5.24$kgCOD_{Cr}/m^3$.day로 처리한 경우 유출수의 농도는 150$kgCOD_{Mn}/L$, 3.6$kgCOD_{Cr}/L$이었으며, 이때 각각 93.2,93%의 제거울을 나타내었다.

• 한국항해항만학회지
• /
• 제37권3호
• /
• pp.257-262
• /
• 2013

거친 바다를 운항하는 선박의 경우 횡 동요로 인해 선박 내의 장비운영 문제 및 탑승객들에게 큰 불편함을 초래한다. 따라서 횡동요 감쇠를 위한 목적으로 빌지 킬, 핀 안정기, 자이로스코프, ART(Anti-Rolling Tank), 타, 플랩 등 다양한 횡 동요 감쇠장치들이 사용되고 있다. 콴다효과는 콴다제트가 곡면의 표면을 따라 흐르며 주위 유동의 순환을 증가시켜 양력을 효과적으로 발생시키는 방법으로 핀의 양력성능을 향상시킬 수 있다. 본 연구에서는 모형시험 및 수치계산을 통해 콴다효과를 적용한 고정식 핀 안정기의 사용가능성을 검토하였다. 그 결과 받음각이 $0^{\circ}$에서, 제트모멘텀을 $C_j$ = 0.25 만큼 공급할 때, 기준 핀의 최대 작동각($26^{\circ}$)에서 발생되는 양력과 동일하게 발생되는 것으로 나타났다. 즉 받음각을 변화시키는 기존의 핀 안정기와 달리 받음각을 고정하고, 콴다효과를 통한 제트유동제어만으로 선박의 횡 동요를 능동적으로 제어 할 수 있을 것으로 보인다.

• 수산해양기술연구
• /
• 제43권1호
• /
• pp.49-61
• /
• 2007

Otter boards in the trawl are the one of essential equipments for the net mouth to be spread to the horizontal direction. Its performance should be considered in the light of the spreading force to the drag and the stability of towing in the water. Up to the present, studies of the otter boards have focused mainly on the drag and lift force, but not on the stability of otter boards movement in 3 dimensional space. In this study, the otter board is regarded as a rigid body, which has six degrees of freedom motion in three dimensional coordinate system. The forces acting on the otter boards are the underwater weight, the resistance of drag and spread forces and the tension on the warps and otter pendants. The equations of forces were derived and substituted into the governing equations of 6 degrees of freedom motion, then the second order of differential equations to the otter boards were established. For the stable numerical integration of this system, Backward Euler one of implicit methods was used. From the results of the numerical calculation, graphic simulation was carried out. The simulations were conducted for 3 types of otter boards having same area with different aspect ratio(${\lambda}=0.5,\;1.0,\;1.5$). The tested gear was mid-water trawl and the towing speed was 4k't. The length of warp was 350m and all conditions were same to each otter board. The results of this study are like this; First, the otter boards of ${\lambda}=1.0$ showed the longest spread distance, and the ${\lambda}=0.5$ showed the shorted spread distance. Second, the otter boards of ${\lambda}=1.0$ and 1.5 showed the upright at the towing speed of 4k't, but the one of ${\lambda}=0.5$ heeled outside. Third, the yawing angles of three otter boards were similar after 100 seconds with the small oscillation. Fourth, it was revealed that the net height and width are affected by the characteristics of otter boards such as the lift coefficient.

• 항공우주시스템공학회지
• /
• 제17권6호
• /
• pp.54-62
• /
• 2023

자유로운 이착륙과 뛰어난 비행능력을 가진 플랩핑 날갯짓 비행체에 관한 집중적 연구개발이 진행되고 있다. 대부분의 플랩핑 날갯짓에 관한 연구는 동기화된 운동의 다양한 운동변수에 대한 연구들로 비동기 운동을 수행하는 에어포일의 비정상 공력 특성에 미치는 영향에 대한 관심은 크지 않았다. 본 연구에서는 히브와 피치 진동운동 주파수가 서로 다른 에어포일의 비정상 공력특성을 수치적으로 연구했다. 먼저 비동기 운동에 따른 운동특성과 받음각 변화를 파악하였다. 해석 결과 진동수 비가 1.0인 경우 양력은 발생하지 않았고 추력이 크게 발생했다. r=0.5인 경우 양력이 크게 발생하였다. 에어포일 주변의와 분포와 표면에서의 압력계수를 분석하여 비동기 진동운동을 하는 에아포일의 공력특성을 분석했다. r=0.5인 경우 r=1.0인 경우 보다 더 큰 앞전 및 뒷전 와들이 관찰되었으며, 이 와들이 비동기 진동운동을 하는 에어포일의 공력특성에 큰 영향을 미친 것을 발견하였다. 향후 피치진동의 진폭이 비동기 진동운동을 하는 에어포일의 비정상 공력특성에 미치는 영향을 연구할 계획이다.

• 한국해양공학회지
• /
• 제27권3호
• /
• pp.73-78
• /
• 2013

CFD (computational fluid dynamics) analyses that considered the dynamic interaction effects between the flow and a turbine were performed to evaluate the power output characteristics of two representative vertical-axis tidal-current turbines: an H-type Darrieus turbine and Gorlov helical turbine (GHT). For this purpose, a commercial CFD code, Star-CCM+, was utilized, and the power output characteristic were investigated in relation to the scale ratio using the relation between the Reynolds number and the lift-to-drag ratio. It was found that the power coefficients were significantly reduced when the scaled model turbine was used, especially when the Reynolds number was lower than $10^5$. The power output characteristics of GHT in relation to the twisting angle were also investigated using a three-dimensional CFD analysis, and it was found that the power coefficient was maximized for the case of a Darrieus turbine, i.e., a twisting angle of $0^{\circ}$, and the torque pulsation ratio was minimized when the blade covered $360^{\circ}$ for the case of a turbine with a twisting angle of $120^{\circ}$.

• 대한기계학회논문집B
• /
• 제28권6호
• /
• pp.713-725
• /
• 2004

The two-dimensional motion of a freely falling circular cylinder in an infinite fluid is investigated numerically using combined formulation. The effect of vortex shedding on the motion of a freely falling cylinder is clearly seen: as the streamwise velocity of the cylinder increases due to gravity, the periodic vortex shedding induces a periodic motion of the cylinder. This motion in turn affects the flow field, which is manifested by the generation of the angular velocity vector of the cylinder parallel to the cross product of the gravitational acceleration vector and the transverse velocity vector of the cylinder. A correlation of St-Re relationship for a freely falling circular cylinder is drawn from the present results. The Strouhal number for a freely falling circular cylinder is found to be smaller than that for a fixed circular cylinder when the two Reynolds numbers based on the streamwise terminal velocity of a freely failing circular cylinder and the free stream velocity of a fixed one are the same. From "thought experiments", it is shown that the transverse motion of the cylinder plays a crucial role in reducing the Strouhal number and has an effect of reducing the Reynolds number from the viewpoint of the pressure coefficient. The mechanism of this reduction in the Strouhal number is revealed by the fact that the freely falling cylinder experiences a smaller lift force than the fixed one due to the transverse motion resulting in the retardation of the vortex shedding.

• 한국항공우주학회지
• /
• 제46권6호
• /
• pp.445-451
• /
• 2018

본 논문에서는 현재 한국항공우주학회 공기역학부문위원회에서 주관하고 있는 EFD-CFD 비교 워크숍의 여러 과제 중 CASE 4 삼각날개(Delta Wing)의 천음속영역의 유동해석 결과를 작성하였다. 풍동실험은 추후에 진행될 예정이며, -5~20도 받음각 영역에서의 CFD 해석을 수행하였다. 해석을 수행한 마하수는 0.7, 0.85, 1.2이다. 삼각날개의 적합한 해석조건을 찾기 위해서 기준격자 크기를 조절하여 격자의존성 해석을 수행하였고, 선택한 격자로 받음각 변화에 따라 양력계수와 항력계수의 경향을 파악하였다.

• Wind and Structures
• /
• 제30권5호
• /
• pp.533-546
• /
• 2020

Large Eddy Simulation (LES) is used to study the effects of steady slot suction on the aerodynamic forces of and flow around a wall-mounted finite-length square cylinder. The aspect ratio H/d of the tested cylinder is 5, where H and d are the cylinder height and width, respectively. The Reynolds number based on free-stream oncoming flow velocity U_∞ and d is 2.78×10⁴. The suction slot locates near the leading edge of the free end, with a width of 0.025d and a length of 0.9d. The suction coefficient Q (= U_s/U_∞) is varied as Q = 0, 1 and 3, where U_s is the velocity at the entrance of the suction slot. It is found that the free-end steady slot suction can effectively suppress the aerodynamic forces of the model. The maximum reduction of aerodynamic forces occurs at Q = 1, with the time-mean drag, fluctuating drag, and fluctuating lift reduced by 3.75%, 19.08%, 40.91%, respectively. For Q = 3, all aerodynamic forces are still smaller than those for Q = 0 (uncontrolled case), but obviously higher than those for Q = 1. The involved control mechanism is successfully revealed, based on the comparison of the flow around cylinder free end and the near wake for the three tested Q values.