• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.412-414
• /
• 2001

In this paper, we describe an real-time facial feature tracker. We only used a general USB PC Camera without a frame grabber. The system has achieved a rate of 8+ frames/second without any low-level library support. It tracks pupils, nostrils and corners of the lip. The signal from USB Camera is YUV 4:2:0 vertical Format. we converted the signal into RGB color model to display the image and We interpolated V channel of the signal to be used for extracting a facial region. and we analysis 2D blob features in the Y channel, the luminance of the image with geometric restriction to locate each facial feature within the detected facial region. Our method is so simple and intuitive that we can make the system work in real-time.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.321-324
• /
• 2001

This paper describes a fast and low-power multiplier co-processor architecture for digital signal processing applications and real-time control systems and its use as a multiplier co-processor for a 32-bit RISC microprocessor utilizing its one of the 16 co-processor interfaces. Its architecture adopts various algorithms to reduce the dynamic power and the area as well. The designed multiplier performs 32$\times$32 bit multiplication, and was designed using verilog HDL and 0.35${\mu}{\textrm}{m}$, 3V, 4M CMOS standard cell library. Its target operating speed is 40MHz, area lower than 10000 gate counts, and 10mW/MHz of power.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.3 no.1
• /
• pp.86-94
• /
• 2011

This paper compares frequency domain and time domain predictions from the ShipMo3D ship motion library with observed motions from model tests and sea trials. ShipMo3D evaluates hull radiation and diffraction forces using the frequency domain Green function for zero forward speed, which is a suitable approach for ships travelling at moderate speed (e.g., Froude numbers up to 0.4). Numerical predictions give generally good agreement with experiments. Frequency domain and linear time domain predictions are almost identical. Evaluation of nonlinear buoyancy and incident wave forces using the instantaneous wetted hull surface gives no improvement in numerical predictions. Consistent prediction of roll motions remains a challenge for seakeeping codes due to the associated viscous effects.

• The Journal of Information Systems
• /
• v.14 no.3
• /
• pp.97-104
• /
• 2005

The paper proposes an implementation architecture of DiffServ-over-MPLS traffic engineering (TE) on Intel IXP2400 network processor using Intel IXA SDK 4.0 Framework. Program architecture and functions are described. Also fast and scalable range-match classification scheme is proposed for DiffServ-over-MPLS TE that has been integrated with functional blocks from Intel Microblocks library. Performance test shows that application can process packets at approximate data rate of 3.5 Gbps. The proposed implementation architecture of DiffServ-over-MPLS TE on Network processor can provide guaranteed QoS on high-speed next generation Internet, while being flexible and easily modifiable.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.70.2-70.2
• /
• 2011

Ultra-high energy cosmic rays(UHECRs) refer cosmic rays with energy above 1018eV. UHECR experiments have employed air shower simulations to quantify the properties of cosmic rays. Using COSMOS and CORSIKA, we have produced a library of over 15000 thinned extensive air shower(EAS) simulations with the primary energies ranging from 1018.5eV to 1020eV and the zenith angle of primary cosmic ray particles from 0 to 45 for proton and iron primaries. We have compared the results from CORSIKA and COSMOS. The comparison has shown perceptible differences in the ground distributions, longitudinal distributions, Calorimetric energy, and Xmax distributions. We have also measured the detector response evaluated using GEANT4 simulations. Here, we discuss S(800), i.e. the signal at a distance of 800 m from the shower core, as the primary energy estimator and present the lateral distribution function(LDF) with S(800).

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.1-5
• /
• 2002

본 논문에서는 UART(Universal Asynchronous Receiver-Transmitter)를 soft IP(Intellectual Property) 모듈 형태로써 VLSI 설계과정을 통하여 구현하였다. 이 모듈은 현재 각종 통신 디바이스에서 최하 말단에서 직렬 데이터를 시스템으로 받아들이거나 병렬 데이터를 직렬 라인에 실어 보내는 중요한 역할을 담당한다. 본 연구에서 설계한 UART는 간단한 모듈 형태로 제작되어 있어 Verilog-HDL을 사용하여 직렬 송ㆍ수신을 필요로 하는 시스템에 내장되어 사용될 수 있다. 본 논문에서는 설계 순서에 따라 UART를 설계하고 Simulation을 하고 Synopsys Tool을 사용하여 Compile 과 Synthesis 후 Gate Area 와 Belay를 검출해 내었다. 합성결과 0.25$\mu$m 공정의 CMOS Cell Library를 사용하였을 경우 전체 면적은 1,013 gate가 나왔다. 본 논문에서 설계한 UART의 최장경로가 최대 4.12ns로 나타났으며, 최대 동작 클럭 주파수는 200MHz 로써 150Mbps 이상의 전송 속도를 가진다.

• Journal of Korea Multimedia Society
• /
• v.11 no.6
• /
• pp.816-827
• /
• 2008

In this paper, two-stage pipelined floating-point arithmetic unit (FP-AU) is designed. The FP-AU processor supports seventeen operations to apply 3D graphics processor and has area-efficient and low-latency architecture that makes use of modified dual-path computation scheme, new normalization circuit, and modified compound adder based on flagged prefix adder. The FP-AU has about 4-ns delay time at logic synthesis condition using $0.18{\mu}m$ CMOS standard cell library and consists of about 5,930 gates. Because it has 250 MFLOPS execution rate and supports saturated arithmetic including a number of graphics-oriented operations, it is applicable to mobile 3D graphics accelerator efficiently.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.3 s.345
• /
• pp.40-47
• /
• 2006

The finite-field multiplication can be applied to the elliptic curve cryptosystems. However, an efficient algorithm and the hardware design are required since the finite-field multiplication takes much time to compute. In this paper, we propose a radix-4 systolic multiplier on $GF(2^m)$ with comparative area and performance. The algorithm of the proposed standard-basis multiplier is mathematically developed to map on low-cost systolic cells, so that the proposed systolic architecture is suitable for VLSI design. Compared to the bit-parallel, bit-serial and systolic multipliers, the proposed multiplier has relatively effective high performance and low cost. We design and synthesis $GF(2^{193})$ finite-field multiplier using Hynix $0.35{\mu}m$ standard cell library and the maximum clock frequency is 400MHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.75-82
• /
• 2008

In this paper, we propose an efficient symbol detection algorithm for multiple-input multiple-output spatial multiplexing (MIMO-SM) systems and present its design and implementation results. By enhancing the performance of the first detected symbol which causes error propagation, the proposed algorithm achieves a considerable performance gain as compared to the conventional sorted QR decomposition (SQRD) based detection and the ordered successive detection (OSD) algorithms. The bit error rate (BER) performance of the proposed detection algorithm is evaluated by the simulation. In case of 16QAM MIMO-SM system with 4 transmit and 4 receive ($4{\times}4$) antennas, at $BER=10^{-3}$ the proposed algorithm obtains the gai improvement of about 2.5-13.5 dB over the conventional algorithms. The proposed detection algorithm was designed in a hardware description language (HDL) and synthesized to gate-level circuits using 0.18um 1.8V CMOS standard cell library. The results show that the proposed algorithm can be implemented without increasing the hardware costs significantly.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.8
• /
• pp.3419-3424
• /
• 2014

Background: Our aim was to conduct a meta-analysis to compare the efficacy and safety of pemetrexed and docetaxel for non-small cell lung cancer (NSCLC). Materials and Methods: We systematically searched the Cochrane Library, PubMed, Embase, China Biology Medicine Database for randomized controlled trials (RCTs) comparing the efficacy and toxicities of pemetrexed versus docetaxel as a treatment for advanced NSCLC. We limited the languages to English and Chinese. Two reviewers independently screened articles to identify eligible trials according to the inclusion and exclusion criteria and assessed the methodological quality of included trials, and then extracted data. The meta-analysis was performed using STATA12.0. Results: Six RCTs involving 1,414 patients were identified. We found that there was no statistically significant differences in overall response rate, survival time, progression-free survival, disease control rate, and 1-2yr survival rate (p>0.050) but it is worthy of mention that patients in the pemetrexed arms had significantly higher 3-yr survival rate (P=0.002). With regard to the grade 3 or 4 hematological toxicity, compared with docetaxel, pemetrexed led to lower rate of grade 3-4 febrile neutropenia, neutropenia, and leukocyts toxicity (p<0.001). There was no significant difference in anemia between the two arms (p=0.08). In addition, pemetrexed led to higher rate of grade 3-4 thrombocytopenia toxicity (p=0.03). As for the non-hematological toxicities, compared with docetaxel, pemetrexed group had lower rate of grade 3-4 diarrhea and alopecia. Conclusions: Pemetrexed was almost as effective as docetaxel in patients with advanced NSCLC. At the same time, pemetrexed might increase the 3-yr survival rate. As for safety, pemetrexed led to lower rate of grade 3-4 febrile neutropenia, neutropenia, leukocytes, diarrhea and alopecia toxicity. However, it was associated with a higher rate of grade 3-4 thrombocytopenia.