• 한국지진공학회논문집
• /
• 제14권1호
• /
• pp.25-34
• /
• 2010

비선형 이력거동을 가지는 교량 구조계에 지진하중이 작용하였을 때 파괴확률을 추정할 수 있는 기법을 제시하였다. 교량 구조계는 지진하중이 작용할 때 이중선형 이력거동을 보이는 단자유도 진동계로서 모델링하였다. 교량의 파괴는 상단의 변위 응답이 지진 지속시간 동안 정해진 한계 상태 값을 최초로 넘어설 때 발생하는 것으로 정의하였다. 지진하중에 대한 비선형 구조계의 최초통과확률을 추정하기 위하여, 단위시간 동안 한계상태를 넘어서는 빈도수를 계산하는 crossing theory를 적용하였다. 단위시간 동안의 한계상태 초과 빈도수 추정을 위하여 필요한, 비선형 구조계의 응답과 응답의 미분값 간의 결합확률밀도함수를 추정하기 위한 기법으로서, Non-Gaussian closure 기법을 제시하였다. 다양한 지반운동 특성을 가지는 다수의 인공지진 가속도 시간이력을 생성하여 교량의 동적 특성에 따른 파괴확률을 추정하였다. 제시된 기법을 사용한 결과 얻어진 파괴확률 값을 crude Monte-Carlo 시뮬레이션을 통하여 얻어진 정해 및 기존의 방법을 적용하여 얻어진 파괴확률 값과 비교함으로써 제시된 파괴확률 추정 기법의 정확성과 효율성을 검증하였다.

• 음성과학
• /
• 제3권
• /
• pp.156-166
• /
• 1998

In this paper, I would like to propose a dividing method by estimating the inflection points and the average magnitude energy in speech signals. The method proposed in this paper gave not only a satisfactory solution for the problems on dividing method by zero-crossing rate, but could estimate the feature of the transient period after dividing the starting point and transient period in speech signals before steady state. In the results of the experiment carried out with monosyllabic speech, it was found that even through speech samples indicated in D.C. level, the staring and ending point of the speech signals were exactly divided by the method. In addition to the results, I could compare with the features, such as the length of transient period, the short term energy, the frequency characteristics, in each speech signal.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권2호
• /
• pp.166-171
• /
• 2002

The main objective of the present study is to estimate the crossbreeding parameters in respect to serum lysozyme level in broilers. The experiment involved a complete $4{\times}4$ diallel design using four synthetic broiler lines namely Coloured Synthetic Male Line (CSML), White Synthetic Male Line (WSML), Coloured Synthetic Female Line (CSFL) and Naked Neck Line (NNL). The lyophilised Micrococcus lysodeikticus suspension was used to detect the lysozyme level in the serum of birds. The data were analysed by least-squares method to find the effects of genetic and non-genetic factors using appropriate model. The crossbreeding parameters for this trait were estimated by complete diallel model assuming the effect of each synthetic line as fixed. The results indicated that additive and non-additive genetic variation attributed to minor genes at many loci is important for the genetic control of serum lysozyme level in chickens. Total non-additive components of variance also showed significant amount of heterosis in crossbred progenies, and therefore exploitation of non-additive component of variance is possible for improvement in serum lysozyme level in broilers. The overall results suggested that for commercial broiler production system, the selection for specialised line on the basis of serum lysozyme level and subsequent crossing of parent lines could enhance the immunocompetence status in relation to serum lysozyme level in crossbred chickens.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 춘계 학술대회 및 국제 감성공학 심포지움 논문집 Proceeding of the 2000 Spring Conference of KOSES and International Sensibility Ergonomics Symposium
• /
• pp.99-103
• /
• 2000

There are two approaches in the study of emotion in the physiological psychology. The first is to clarify the brain mechanism of emotion, and the second is to evaluate objectively emotions using physiological responses along with our feeling experience. The method presented here belongs to the second one. Our method is based on the "level-crossing point detection" method. which involves the analysis of frequency fluctuations of EEG and is characterized by estimation of emotionality using coefficients of slopes in the log-power spectra of frequency fluctuation in alpha waves on both the left and right frontal lobe. In this paper we introduce a new theory of estimation on an individual's emotional state by using our non-invasive and easy measurement apparatus.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권7호
• /
• pp.364-369
• /
• 2004

In this Paper, a flashover prediction method using the leakage current in the contaminated EPDM distribution polymer insulator is proposed. The leakage currents on the insulator were measured simultaneously with the different salt fog application such as 25g, 50g, and 75g per liter of deionized water. Then, the measured leakage currents were enveloped and transformed as the CDFS using the Hilbert transform and the level crossing rate, respectively. The obtained CDFS having different gradients(angles) were used as a important factor for the flashover prediction of the contaminated polymer insulator. Thus, the average angle change with an identical salt fog concentration was within a range of 20 degrees, and the average angle change among the different salt fog concentrations was 5 degrees. However, it is hard to be distinguished each other because the gradient differences among the CDFS were very small. So, the new weighting value was defined and used to solve this problem. Through simulation, it Is verified that the proposed method has the capability of the flashover prediction.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.473-478
• /
• 1987

The purpose of this study is to design a phoneme-class recognition system for Korean language using filter-bank analysis and zero crossing rate method. First, the speech signals are separated in 16 bandpass filters to obtain short-time spectrum of speech signals, and digitized by 16-ch A/D converter. And then, with the set of features which extracted from patterns of ratios of each channel energy level to overall energy level, the decision rules are made for recognize unknown speech signal. In this experiment, the recognition rate was about 93.1 percent for 7 vowels under multitalker environment and 74.4 percent for 10 initial sounds at single speaker.

• 대한교통학회지
• /
• 제14권2호
• /
• pp.119-136
• /
• 1996

The evaluation of risk level or possibility of traffic accidents is a fundamental task in reducing the dangers associated with current transportation system. However, due to the lack of data and basic researches for identifying such factors, evaluations so far have been undertaken by only the experts who can use their judgements well in this regard. Here comes the motivation this thesis to evaluate such risk level more or less in an automatic manner. The purpose of this thesis is to test the fuzzy-logic theory in evaluating the risk level of traffic accidents. In modeling the process of expert's logical inference of risk level determination, only the geometric features have been considered for the simplicity of the modeling. They are the visibility of road surface, horizontal alignment, vertical grade, diverging point, and the location of pedestrain crossing. At the same time, among some inference methods, fuzzy composition inference method has been employed as a back-bone inference mechanism. In calibration, the proposed model used four sites' data. After that, using calibrated model, six sites' risk levels have been identified. The results of the six sites' outcomes were quite similar to those of real world other than some errors caused by the enforcement of the model's output. But it seems that this kind of errors can be overcome in the future if some other factors such as driver characteristics, traffic environment, and traffic control conditions have been considered. Futhermore, the application of site's specific time series data would produce better results.

• 한국해안·해양공학회논문집
• /
• 제29권5호
• /
• pp.239-246
• /
• 2017

현장에서 파고와 주기만을 관측한 경우 주로 개별파 분석법을 사용하여 다양한 파랑 특성을 산정한다. 본 논문에서는 MATLAB 언어를 이용하여 개별파 분석 프로그램을 개발하였다. 영점 상향 교차법과 영점 하향 교차법을 이용하여 1) 평균해면 보정, 2) 영점 교차 시간 산정, 3) 개별파고 산정, 4) 자료 관측기간 변화 등의 기능을 수행할 수 있다. 해모수 1호에 설치된 레이더(WaveGuide Radar)를 사용하여 관측된 시간간격 0.2초 자료를 대상으로 개발된 프로그램의 적용성을 검토하였다. 조석성분 제거 및 영점 교차 시간 산정은 선형 혹은 2차원으로 내삽하였다. 개별 파고 산정은 Goda 방법이 적정한 것으로 판단되었으며, 본 연구에서 제안한 방법은 차후 후속 연구를 통하여 개선할 여지가 있는 것으로 판단된다. 대표파의 특징은 샘플의 유한성 등으로 인하여 영점상향교차법과 영점하향교차법으로 산정한 결과가 상이하다는 것을 알 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.318-321
• /
• 2005

Crashworthy design of a train is a systematic approach to ensure the safety of passengers and crews in railway transportation for the prescribed accident scenarios. This approach needs new structural arrangements and designs to absorb higher levels of impact energy in a controlled manner and interior designs to minimize passenger injuries. In this paper, an evaluation method for crashworthiness of Korean tilting train express is introduced. Crush characteristics for each part of tilting train express are evaluated numerically through 3-dimensional shell element analysis with LS-DYNA. Based on a head-on collision and a level crossing collision scenarios, the crash behaviors of tilting train express are evaluated numerically using full-rake collision simulations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.804-807
• /
• 1997

Recently equal-channel angular pressing (ECAP) has been employed to produce ultra-fine grain size materials. In this paper pure-Zirconium is considered due to its applicability to nuclear reactors. Among many process parameters of ECAP frictional effect on the plastic deformation of die has been investigated. The back pressure effect due to friction increases the stress level of die especially at the crossing area of channels, which may result in plastic deformation of die. The finite element method has been employed to investigate this issue.