• 대한방사선기술학회지:방사선기술과학
• /
• 제31권2호
• /
• pp.161-169
• /
• 2008

초음파 검사로 신장의 크기를 측정하는 일은 신 질환의 진단, 치료, 예후 예측에서 중요한 지표가 되므로, 이에 대한 정확한 계측 및 평가는 임상적으로 매우 중요하다. 이에 신장 크기 측정 시 영향을 미치는 요인들을 나열하여, 신장크기 측정의 재현성과 객관성을 높여 보고자 하였다. $21{\sim}27$세의 대한민국 성인 44명을 대상으로 하였다. 8시간 이상 금식한 상태에서 피검자의 자세(position)와 프로브(probe)의 접근방향을 변화시키면서 양측 신장이 가장 크게 보이도록 측정하였다. 이후 물 $700{\sim}1,000\;cc$를 섭취하고 30분과 1시간 후에 같은 방법으로 각각 측정하여 신장크기를 비교하였다. 옆으로 누운 자세(lateral down decubitus)에서 측면주사(lateral approach scan) 시 좌, 우측 모두 신장의 평균길이가 가장 크게 측정되었으며, 측정 시 편차도 가장 크게 나타났다. 금식상태에서 우측 신장의 평균길이는 10.19 cm, 좌측 신장의 길이는 10.33 cm이었다. 수분 섭취 후 60분에서 우측 신장의 평균길이는 10.94 cm, 좌측 신장의 길이는 11.13 cm이었다. 금식 상태에서의 신장 평균길이와 수분섭취 후 60분에 길이를 비교하면, 우측신장의 길이는 7.3%, 좌측 7.7%로 크기가 증가하여 통계적으로 유의하게 나타났다(P < 0.003). 초음파를 이용한 신장의 크기측정은 환자의 수분 섭취상태와 프로브의 접근 방향, 그리고 환자의 자세에 따라 달리 측정될 수 있다. 임상적으로 신장크기 측정이 특히 중요할 때는 수분의 섭취량과 섭취시간을 고려해야 하며, 환자의 자세와 프로브 접근방향을 기록-보관하여, 환자 추적 검사 시 이를 적용하는 것이 신장 길이 측정의 재현성을 높이는 방법이라 사료된다.

• 한국의류산업학회지
• /
• 제17권5호
• /
• pp.815-827
• /
• 2015

This study analyzes the characteristics by age and type for middle aged and elderly women foot shapes aged 40-69 years. ANOVA, factor, and cluster analyzed middle aged and elderly women's foot shapes. The results of the study are as follows. First, higher age groups tended to have smaller foot lengths, ball/instep circumferences, circumferences, and ball heights with larger heel height values and higher degrees of gathering of toe 1 and toe 5 toward the feet reference axis. Second, foot lengths were 220 mm-240 mm and the ball circumference's size symbol in high frequency sections were distributed from E to EEEE in the 40s and 60s groups and from D to EEEE in the 50s group. Third, eight factors were extracted through the factor analyses of middle aged and elderly women's foot measurement items. Fourth, a cluster analyses classified the subjects into four types. Type 1 is a normal foot type with medium foot length and small ball circumference and type 2 is a long and flat foot type with a type with large foot length and ball circumference values as well as small ball height values. Type 3 is a thick foot type with a medium foot length, large ball circumference, large ball height and type 4 is a toe deformation foot type with medium foot length, small ball circumference, and a high degree of toe gathering toward the center.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1534-1539
• /
• 2004

This experiment has been carried out to measure the process of droplet formation between water phase fluid(PVA 3%) and organic phase fluid(oil) and vector fields measured by a Dynamic Micro-PIV method in the inside of a droplet while generated. Droplet length controlled by changing flow rate conditions in microchannel. Water-in-oil(W/O) droplets successfully generated at a Y junction and cross microchannel. But oil-in-water(O/W) droplets could not be formed at a Y junction microchannel. That is, PVA 3% flow could not be detached from the PDMS surface and ran parallel with oil flow. When PVA 3% flow rate was constant, droplet length and time period decreased as oil flow rate increased, but droplet frequency increased. When PVA 3% and oil flow rate ratio was constant, droplet length and time period decreased as flow rate increased, but droplet frequency increased. All that case, Standard deviation of droplet formation have less than 5% at averaged droplet length and regular-sized droplets were reproducibly formed.

• 한국정밀공학회지
• /
• 제28권9호
• /
• pp.1070-1077
• /
• 2011

This study intends to assess the defect in the weld zone of titanium grade 2 plate in terms of acoustical anisotropy based on the angle beam method. Depending on the rolling direction, the ratio of wave velocity was found to be 1.08 and the difference in the angle of refraction was more than seven degrees, confirming the presence of acoustical anisotropy. Thus for measuring the length of defect in the weld zone of the titanium plate (thickness of 10mm), the distance amplitude characteristics curves of titanium, TDACC-R and TDACC-T were constructed for the measurements in consideration of the acoustical anisotropy on CRT of the ultrasonic testing equipment. As a result, when the distance amplitude characteristics curve corresponds to the rolling direction, the length of defect was close to the actual measurement within 1mm and when different, the difference was found to be over 4mm. It was affirmed that the acoustical anisotropy should be taken into consideration when measuring the length of defects in the weld zone of the titanium plate with the presence of acoustical anisotropy.

• 복식문화연구
• /
• 제13권1호
• /
• pp.1-5
• /
• 2005

The objective of this paper is to provide fundamental data to establish measuring system of clothing that is more accurate. For the objective, stature and ration of height items, stature and ratio of circumference item, stature and ratio of length item on the children are investigated to obtain the interrelation of each item. Data for the research are selected from 52 people of 6 years old on boys and 49 people of 6 years old on girls who dwell in Seoul. The results of the research are as follows. Because ratio of the body on the stature of children is different from ratio of the adult, the same method for the adult cloth is not appropriate when producing the cloth of the children. observing the interrelation of each measurement item, measurement system of the children cloth that is indicated by the stature and the breast circumference, the stature and the waist circumference is not reasonable. Because the value of correlation of back length and circumference item was, it is not suitable that the back length is graded by the breast circumference when producing the cloth of the children.

• Journal of Oral Medicine and Pain
• /
• 제7권1호
• /
• pp.59-65
• /
• 1982

For the purpose of estimation of age based on changes in the human root dentin transparency, 173 extracted teeth in each part of upper & lower Lt. & Rt. central, lateral incisors to Lt. & Rt. 2nd premolars were evaluated and analized in terms of root dentin transparency. The results are as follows : 1. It was reconfirmed that there exisits coparatively close correlatonship between age and the root dentin transparency. 2. It was proved that the correlation between the changes in the length and the area of the root dentin transparecy in accordance with the ages of each tooth was highest at the upper central incisor, and next at the low central incisor and the upper second premoloar respectively. 3. In the analysis of the age of the transparency, the error was less in the measurement of the area than in the measurement of the length in regard to the estimation of age. 4. The results from the test of the upper central incisor were boiled down to the following linear equation about the correlation among the area and the length of the transparency, and the age: Y=6.94X+14.7(r=0.59) (Y:estimated age, X:length mm) Y=138.47X+12.31(r=0.72) (Y:estimeted age, $X:area\textrm{cm}^2$)

• 한국정보통신학회논문지
• /
• 제2권1호
• /
• pp.141-146
• /
• 1998

Recently, the computer vision such as part measurement, and product inspection is very popular to achieve the factory automation since the labor cost is dramatically increasing. In this paper, the diameter and the length of rope are measured by CCD camera which is orthogonally mounted on the ceiling. Two parameters which are the diameter and the length of rope are used to measure the weight of rope. If the weight of rope is reached to predetermined weight, the information is transmitted to PLC(programmable logic control) to cut the rope on the wheel. The cutting machine cuts the rope according to the information obtained from the CCD camera. To measure the diameter and length of rope on real time, the searching space for image segmentation is restricted the predetermined area according to the camera calibration position. Finally, to estimate the weight of rope, the knowledge base system which depends on the diameter, the length of rope, and weight relation between these information are constructed according to diameters of rope. This method contributes to achieve the factory automation, and reduce the production cost since the operators are unnecessary to measure the weight of rope by try-and-error method.

• 한국의류학회지
• /
• 제29권2호
• /
• pp.367-378
• /
• 2005

The purpose of this study was to analyse craniofacial shape by 3D scanner for female adults with age groups. In this study, heads of 452 female adults were measured by 3D scanner. The obtained 25 measurements were analyzed by statistical methods. The results can be summarized as follows; 1. From the basic statistical data analysis, vertex-tragion and the length between the pupils were the longest in their twenties, and grew shorter in elderly groups. The length of nasion-subnasale and the width of mouth increased with an increased in age. 2. According to the analysis of the craniofacial proportions, the head type of female aduls was short-headed. The size of lower face increased with an increase in age. 3. The statistically noticeable differences were found in the measurement of the left and the right sides of face in the age groups of 20, 30, and 40. 4. High correlations were found in two perpendicular lengths, two horizontal lengths and two widths. 5. The order of factor analysis was as follows; the horizontal length, the perpendicular length and the width from highest.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.216-219
• /
• 2005

In precision length measurements using optical interferometry based on homodyne or heterodyne principles, it is crucial to have frequency-stabilized monochromatic light sources. To the end, we investigate the possibility of utilizing the optical comb constituted by ultrashort femtosecond pulse lasers generated from a gain medium of titanium-doped aluminium oxide $(Ti:Al_2O_3)$. The optical comb is stabilized by locking to the caesium atomic clock, which allows all the modes of the comb to maintain an extremely high level of frequency stabilization to precision of one part in $10^{16}$. Then, high precision length measurements are realized by extracting a single or group of particularly wanted optical frequency components or by adopting a third-party light source locked to the comb. Required measurement system setup will be presented in detail along with experimental results.

• 지구물리와물리탐사
• /
• 제14권4호
• /
• pp.305-315
• /
• 2011

암석시료에 대한 음파 속도측정의 정확성을 검증하고 정밀한 측정을 위한 기초적인 실험의 일환으로 아크릴과 스테인리스강 재질의 시료에 대하여 길이와 축하중을 달리하여 각각에 대해 3회씩 측정한 총 864 경우에 대하여, 시험편을 통과한 초동 주시를 측정하고 분석하였다. 축하중이 가해진 상태에서의 S-파 측정은 P-파에 비해 측정에 어려움이 있었으며 이에 따라 반복측정, 길이, 축하중에 의한 편차도 S-파가 훨씬 크게 나타났다. 또한, 재질에 따라서는 스테인레스강 시편보다는 아크릴 시편의 초동주시 편차가 약 2배 정도 양호하게 나타났으며 이는 아크릴 시험편의 경우가 트랜스 듀서와 시험편 간의 접촉 coupling이 안정적이며 또한 동일한 시간 분해능이나 유사한 전기적 잡음에 비하여 초동 주시가 길기 때문으로 판단된다. 실험결과, 아크릴 시험편과 스테인리스강 시험편의 탄성파 속도를 측정할 때는 60 ~ 90 mm 정도의 길이를 갖는 시험편을 20 kg (27.7 $N/cm^2$) ~ 30 kg (41.6 $N/cm^2$) 내외의 축하중 하에서 측정하는 것이 가장 좋으며, 스테인리스강 시험편의 S-파 속도는 길이 50 mm 이하의 시험편을 사용하여 측정해야 한다. 이러한 실험 결과는 암석 코어의 속도 측정시 시스템 지연의 측정 및 보정에 활용될 수 있을 것이다.