• 한국군사과학기술학회지
• /
• 제14권4호
• /
• pp.694-699
• /
• 2011

A closed-form technique is presented for estimating a single source location from a set of noisy time delay measurements between distributed sensors. The localization formula is derived from nonlinear least squares minimization over the unknowns of target range and bearing in polar coordinates. Computer simulation results are provided for the purpose of performance analysis. Constrained least squares minimization method with prior source location information is also discussed.

• Journal of Electrical Engineering and Technology
• /
• 제5권4호
• /
• pp.538-544
• /
• 2010

This paper proposes an estimation algorithm for the separate primary and secondary leakage inductances of a three phase $Y-\Delta$ transformer using least squares method. The voltage equations from the primary and secondary windings are combined into a differential equation to estimate the separate primary and secondary leakage inductances in order to use the line current of the delta winding. Separate primary and secondary leakage inductances are obtained by applying least squares method to the differential equation. The performance of the proposed algorithm is validated under transient states, such as magnetic inrush and overexcitation, as well as in the steady state with various cut-off frequencies of low-pass filter. The proposed technique can accurately generate separate leakage inductances both in the steady and transient states.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1694-1700
• /
• 2004

In this paper, we propose the AWLS/MFT (Adaptive Weighed Least Squares/ Modulation Function Technique) devised by A. E. Pearson et al. for the transfer function estimation of a modal system and investigate the performance of several algorithms, the Gram matrix method, a Luenberger Observer (LO), Least Squares (LS), and Recursive Least Squares (RLS), for the estimation of initial conditions. With the benefit of the Modulation Function Technique (MFT), we can separate the estimation problem into two phases: the transfer function parameters are estimated in the first phase, and the initial conditions are estimated in the second phase. The LO method produces excellent IC estimates in the noise free case, but the other three methods show better performance in the noisy case. Finally, we compared our result with the Prony based method. In the noisy case, the AWLS and one of the three methods - Gram matrix, LS, and RLS- show better performance in the output Signal to Error Ratio (SER) aspect than the Prony based method under the same simulation conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.134-136
• /
• 1986

In this paper, a new power spectral estimation technique is presented. At first, by transforming the original data with the Karhunen-Loeve Transform(KLT), we can reduce the amount of the redundant information. Next, by modeling the transformed data by means of the autoregressive(AR) model and then applying the least-squares parameter estimation algorithm to this model, even more accurate spectrum estimates can be obtained. The KLT is the optimum transform for signal representation with respect to the mean-square error criterion. And the least-squares method is used to overcome the inherent shortcomings of popular burg algorithm.

• Journal of the Korean Data and Information Science Society
• /
• 제25권2호
• /
• pp.423-429
• /
• 2014

본 논문은 이원고정효과모형의 분산분석에서 오차의 독립성과 등분산성이 만족되지 않는 경우를 가정하고 있다. 자료분석을 위한 모수추정방법으로 가중최소제곱법을 가정하고 있으며 모수를 추정하기 위한 방법으로 모형의 순차적 적합방식을 이용하고 있다. 또한, 모형의 행렬표현식으로부터 벡터공간에서의 사영을 이용하여 자료를 분석하는 방법을 제시하고 있다. 모형의 순차적 적합에 해당하는 제1종 제곱합을 구하기 위하여 모형행렬에 의한 부분공간으로의 사영을 다루고 있다. 이 경우에 사영에 의한 제곱합을 사영제곱합으로 취급한다.

• 응용통계연구
• /
• 제21권2호
• /
• pp.275-290
• /
• 2008

마이크로어레이 유전자 발현 자료는 대용량이며 또한 관측 과정이 복잡하여 결측치가 빈번하게 발생된다. 본 논문에서는 관측 시점 간에 상관성을 갖는 시간경로 유전자 발현 자료에 대한 결측치 추정을 위하여 순차적 부분최소제곱(sequential partial least squares: SPLS) 회귀적합 방법을 제안한다. 이는 순차적 기법과 부분최소제곱(partial least squares: PLS) 회귀적합 방법을 결합시킨 것이다. 세 가지의 이스트(yeast) 시간경로 자료들에 대한 몇 가지 모의실험을 통하여 제안된 결측치 추정방법의 유용성을 평가한다.

• 전자공학회논문지
• /
• 제50권6호
• /
• pp.246-253
• /
• 2013

위상 펼침 (phase unwrapping)과 최소자승(least-squares) 기법들을 이용한 기존 디지털 주파수 변별기 (Digital Frequency Discriminator: DFD) 설계를 바탕으로, 본 논문에서는 주파수 판별 대역이 4배 확장한 새로운 DFD 설계를 제안한다. 구체적으로, 주파수 판별 대역을 기존 2-6GHz에서 2-18GHz로 4배 확장함에 따라 주파수 판별 정확도를 높이기 위해 DFD 내의 지연선 수가 증가되고, 이에 따른 주파수 추정 연산량이 증가되는데, 본 논문에서는 이러한 2-18GHz 대역 주파수 판별을 위해 보다 효율적인 주파수 추정 알고리즘을 제안한다. 특히, 제안하는 주파수 추정 방법에서는 기존 방법인 위상 펼침 기법을 기반으로 펼친 위상의 후보군을 만들되, 각 지연선에서 발생할 수 있는 위상 잡음을 미리 추정하여, 적절한 펼친 위상 후보군을 선택하는 새로운 주파수 후보군 선택 방법을 제안한다. 이렇게 선택된 위상 후보군만을 최소자승 기법에 적용하여 주파수를 추정함으로써, 결과적으로 기존 DFD의 주파수 추정에 비해 연산량을 줄일 수 있다. 끝으로, 제안한 DFD에 대한 주파수 변별 방법을 비교 분석하고, 시뮬레이션을 통해 제안된 방법의 주파수 판별 성능을 검증한다.

• Smart Structures and Systems
• /
• 제3권2호
• /
• pp.201-217
• /
• 2007

An active damage detection technique is introduced to locate damage in an isotropic plate using Lamb waves. This technique uses a time-domain energy model of Lamb waves in plates that the wave amplitude inversely decays with the propagation distance along a ray direction. Accordingly the damage localization is formulated as a least-squares problem to minimize an error function between the model and the measured data. An active sensing system with integrated actuators/sensors is controlled to excite/receive $A_0$ mode of Lamb waves in the plate. Scattered wave signals from the damage can be obtained by subtracting the baseline signal of the undamaged plate from the recorded signal of the damaged plate. In the experimental study, after collecting the scattered wave signals, a discrete wavelet transform (DWT) is employed to extract the first scattered wave pack from the damage, then an iterative method is derived to solve the least-squares problem for locating the damage. Since this method does not rely on time-of-flight but wave energy measurement, it is more robust, reliable, and noise-tolerant. Both numerical and experimental examples are performed to verify the efficiency and accuracy of the method, and the results demonstrate that the estimated damage position stably converges to the targeted damage.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1639-1645
• /
• 2011

A technique to allocate responsibilities among the interested parties in electric power system with harmonic voltage distortion at the point of common coupling (PCC) has been presented. The recursive least-squares technique has been used to estimate the parameters of the Thevenin equivalent load model. The validity of the technique has been verified using a simulation which considered the voltage waveform distortion at the PCC between the utility and two industrial consumers. With the estimated data from the measured voltage and current waveform at the PCC, the individual contributions to the distortion of voltage waveform at an interested harmonic frequency have been calculated and could provide a flexible solution to identify the source of harmonic pollution in distribution systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.625-628
• /
• 1997

In this paper the new neural network and sliding mode suspension controller is proposed. That neural network is error self-recurrent neural network. For fast on-line learning, this paper use recursive least squares method. A new neural networks converges considerably faster than the backpropagation algorithm and has advantages of being less affected by the poor initial weights and learning rate. The controller for suspension systems is designed according to sliding mode technique based on new proposed neural network.