• 설비공학논문집
• /
• 제20권1호
• /
• pp.26-34
• /
• 2008

Heat recovery ventilator(HRV) is recommended to improve indoor air quarlity (IAQ) and energy conservation in apartment houses. Recently, in Korea, HRV is produced from many manufacturers. However, there have been not so many experiences to apply HRV in apartment houses and verification on the performance such as heat exchange efficiency, carry-over rate, internal leakage, etc. have not been carried out sufficiently. So in this study, fan performance, heat exchange efficiency, air leakage, internal exhaust leakage, external leakage and sound level of HRV were examined for selected HRV models under domestic and international standard. Results of performance test, there were need to improve latent heat exchange efficiency and sound level of HRV.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1721-1723
• /
• 2002

This paper deals with the analysis of field condition for earth leakage current alarming system in the stage lighting, stage sound stage machinery installation. These analyses of field condition were carried out in accordance with investigating an installation of earth leakage current alarming system with respect to a main line of power source, dimmer, sound equipment, machinery mobile unit equipment and so on. As a result of analyses. The earth leakage current alarming system has been installed only a part of the main line of power source and the probability of places which were installed was less than 50(%). Therefore, it is desirable that the earth leakage current alarming system is installed at places which are suitable, for example, dimmer, each kind machinery etc. in order to prevent electrical hazard.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.282-287
• /
• 2009

In this paper, 3-stage centrifugal turbo compressor was measured and analyzed numerical simulation for find noise source and was reduced noise with changing designs. For this purpose, it was measured noise level and was analyzed noise frequency at each stage. In order to Find where is noise source, the study was investigated about structure borne noise by using modal analysis and also was checked sound radiation and leakage of noise at inlet and outlet by result of sound intensity. In order to reduce of noise, sound insulation rings were maded and were adhered at joint and noise reduction effects were verified by measurement and numerical simulation. From the analysis results of leakage of noise, this study presented new joint designs, also it was verified by result of numerical simulation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3458-3463
• /
• 2007

Leakage would happen because of the damage of high temperature and high-pressure valve in nuclear power plant. condition based prevention maintenance is essential by using the suitable method based on local condition. Energy loss prevention can prevent from an accurate test, Local actually and ability. The methods of test for high energy fluid leakage at present are analysis of ${\Delta}$T, AE(Acoustic Emission) analysis, and thermal image. The result for test of AC (Main steam) system in YNG 2 Unit reveals that the AE occurred clearly in leakage situation, but thermal image didn't occur. It is identified that leakage is occurred when the orifice located front and back of valve operates. It shows that making a impatient judgment by using the single method if it is leakage is containing uncertainty. So I think that using the Multi-Measuring method is more sound judgment than Single-Measuring method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1189-1194
• /
• 2002

Acoustic intensity is usually estimated by the cross-spectrum of acoustic pressure at two adjacent micrphones. The cross-spectrum calculated by digital Fourier transform technique will unavoidally have leakage error since the period of signal will not be usually coincident with record length. Therefore, the acoustic intensity estimated by the conventional r]n analyzer will show distorted value. In this paper the expression of the Fourier transformed data of a harmonic signal is formulated when there is leakage error. The method to elimate the effect of leakage error from the contaminated data is also proposed. Some numerical examples show the validation of the proposed method.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.387-392
• /
• 2016

Lower flux leakage designs have become important in the development of microspeakers used in thin and miniaturized mobile phones. We propose four methods to reduce the flux leakage of the magnetic circuit in a microspeaker. Optimization was performed based on the proposed approach by using the response surface method. Electromagnetic analyses were conducted using the finite element method. Experimental results are in good agreement with the simulated results obtained in one degree-of-freedom analysis from 100 to 5 kHz. Both the simulated and experimental results confirm that one of the proposed methods is much more effective in reducing flux leakage than the other methods. In the optimized method, compared with a default approach, the average radial flux density in the air gap decreased only by 5.5%, the maximum flux leakage was reduced by 28.6%, and the acoustic performance at primary resonance decreased by 0.45 dB, which gap is indiscernible to the human ear.

• 대한기계학회논문집B
• /
• 제36권6호
• /
• pp.655-662
• /
• 2012

심각한 사고를 초래하는 석유화학 플랜트의 가스 누출 여부와 위치를 실시간으로 탐지하기 위하여 주변의 여러 기계소음 등으로부터 비정상적 누출 음향을 분리할 수 있는 기법을 제시하였다. LMS 알고리즘을 이용하여 FIR구조의 적응필터와 누출 탐지용 상호상관함수를 이용하여, LABVIEW를 통하여 누출예측프로그램을 개발하였고 직접 제작한 장비를 이용하여 잔향실에서 실험을 수행하였다. 홀 사이즈, 압력, 거리, 주파수를 인자로 하여 비정상적 누출소음에 대한 실험에서 얻어진 데이터를 분석한 결과, 암소음은 1kHz 대역 이하에서 주로 발생하고 누출에 의한 소음신호는 고주파 대역, 특히 16kHz의 대역에서 가장 잘 발생한다는 것을 알게 되었다. 이런 음향기법의 가능성을 확인하기 위해서 실제로 정유공장에서 소음을 측정한 결과, 펌프와 압축기에서의 소음신호가 각각 2kHz, 4.5kHz로 측정됨으로써 주변 환경 소음과 누출음이 구별 가능하고 누출 위치(거리)의 탐지가 가능함을 밝혔다.

• 한국음향학회지
• /
• 제22권5호
• /
• pp.345-350
• /
• 2003

음향 인텐시티는 근접한 두 개의 마이크로폰으로부터 얻어지는 음압의 크로스스펙트럼으로부터 얻어진다. 크로스스펙트럼은 이산 푸리에 변환에 의해 얻어지는데 이는 기록시간과 신호의 주기가 일반적으로 일치하지 않기 때문에 누설오차의 발생을 피할 수 없다. 그러므로 기존의 FFT 해석기로부터 얻어지는 음향 인텐시티는 왜곡된 값을 보여준다. 본 논문에서는 단일주파수를 가지는 조화 신호에 누설오차가 발생한 경우 푸리에 변환된 데이터를 규정한다. 또한 왜곡된 데이터로부터 누설오차의 영향을 제거하는 방법을 제안한다. 제안한 방법의 타당성을 보이기 위해 몇 가지 수치해석 예를 보인다.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.85-90
• /
• 2000

For more esthetic treatments the use of composite in molar areas are increasing. But polymerzation shrinkage that cause marginal leakage and cuspal deflection has been the problems of composites. The purpose of this study is to compare the effect of low intensity curing and polishing period on marginal leakage. Cavities were prepared on the buccal or lingual surface of forty five sound extracted human teeth and etching, application of bonding agent and filling of composite was done. Group 1 was light cured at intensity of 600$mW/cm^2$ for 41 seconds and polished. Group 2 was light cured at intensity of 300$mW/cm^2$ for 2 seconds and polished and after polishing it was light cured for 40 seconds at 600$mW/cm^2$. Group 3 was light cured at intensity of 300$mW/cm^2$ for 2 seconds and waited for 5 minutes and after curing at 600$mW/cm^2$ for 40 seconds polishing was done. The specimens were thermocycled at $5^{\circ}C$ and $55^{\circ}C$ for 1000 cycles and immersed in 2% methylene blue solution for 24 hours. Composite-tooth interface was examined under stereobinocular microscope for dye penetration. The results were as follows : 1. Group which were cured at low intensity and polished after curing at high intensity showed less marginal leakage than group which were cured at high intensity for 41 seconds(p<0.05). 2. Marginal leakage between group which were cured at low intensity and polished immediately and group which were cured at high intensity for 41 second were not significantly different. Light curing at low intensity can reduce marginal leakage but polishing immediately after curing at low intensity for short time can affect marginal leakage.

• 한국정보통신학회논문지
• /
• 제24권9호
• /
• pp.1231-1240
• /
• 2020

상수도 배관은 땅속에 매설되어 있어서 배관의 노후화에 따른 누수를 맨눈으로 탐지하기가 불가능하며, 누수음을 감지함으로써 배관의 누수를 탐지하는 기술이 주로 사용된다. 본 논문에서는 상수도 배관의 양단에 두 개의 가속도계를 부착·취득한 데이터 간의 도달 시간 차이를 계산하여 누수 지점을 탐지하는 알고리즘을 개발하였다. 배관의 누수 시험은 17.2m의 배관에 4.3m, 8.6m, 12.9m 지점에 밸브를 설치하고, 밸브의 개도율을 30%, 70%로 변경해 가면서 누수 지점을 분석하였으며, 밸브가 30%, 70%씩 개방된 정도의 배관 내 압력 강하에 대해서는 누수를 탐지할 수 있는 것으로 확인되었다. 초기 단계의 누수를 탐지하는 것이 매우 중요하며, 본 연구에서 적용한 알고리즘으로부터 초기의 누수 지점의 탐지가 가능할 것으로 판단된다.