• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.17-32
• /
• 1986

To obtain basic information needed for developing better pearl barley varieties, a total of 148 lines of pearl barley were collected from nationwide survey except for Kangwon and Chejoo provinces and classified by principal component analysis. The results are summarized as follows : 1. Variabilities of characters for all lines except for leaf width and 100 K. Wt.(Unpolished) were high enough to indicate variation of lines. 2. Correlation coefficients among 18 characters were high enough and they showed the shape of normal distribution, more or less, inclined toward positive values. 3. The lines could be classified into four groups by correlation coefficient for 18 characters : Group I was characterized as the lines composed of grain and plant type, Group II maturity, Group III the number of tillers, and Group IV the nature of germination, respectively. 4. About 60% of the total variation could be appreciated by the first four principal components and about 89% of the total variation by the first ten principal components. 5. Contribution of characters to principal components was variable and was high at upper principal components and low at lower principal components. 6. The value of eigen vector corresponding to those which had high significant correlation coefficient between characters was almost of the same value. 7. The lines were classified into four groups by principal component analysis. 8. The lines were also classified into four groups by taxonomic distance. Group I included 79 lines, Group II 40 lines, Group III 22 lines, and Group IV 7 lines, respectively. 9. Four groups classified by taxonomic distance could be characterized as follow : Group I : medium height plant, small kernels, medium maturity, and narrow and short leaf, Group II : short height plant, small kernels, early maturity, and narrow and short leaf. Group III : tall height plant, large kernels, late maturity, and broad and long leaf. Group IV : short height plant, large kernels, medium maturity, and narrow and short leaf.

• Korean Journal of Weed Science
• /
• v.8 no.3
• /
• pp.273-282
• /
• 1988

The seventeen barnyardgrass [Echinochloa crus-galli (L.) Beauv.] accessions, which were collected national-widely in 1986 and selected two times through 1987, were experimented at 1988. To study the degree of ecological variations of the collected accessions of native barngardgrass species as a weed, the experiment was conducted with Wagner pots in size of 1/5000a and under P.E. film house. Among 57 characters, 100 grains weight, rate of tiller increase from transplanting to 30 days, the number of the maximum tillers and rate of dry weight increase from 15 DAS to 22 DAS were become intra-specific variarions as higher coefficient of varation than 30%, the size of the first leaf, fresh weight and dry 22 seedlings, rate of productive tiller, panicle number and tillering divergence made intra-specific variations as more and less C. V. than 25%, while the required days upto heading since seeding at June 6. rate of fresh/dry weight and plant height of 22 days old seedling made intra-specific variations as the coefficient of variation of about 50%. Among the attributes the color in leaf, leaf sheath, mid-ribs, node, spike, grain, and plant type, length of leaf marginal tooth, grain shape, purple bend on leaf were seemed useful to indentify the accessible specific.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.449-455
• /
• 2010

'Moulinrouge' was selected as the best regenerating cultivar among 18 different spray-type chrysanthemum cultivars bred in the Gyeongnam Flowers Breeding Research Institute. When the leaf explants from standard- and spray-type chrysanthemum 'Jinba' and 'Moulinrouge' were incubated on MS basal medium supplemented with $0.5mg{\cdot}L^{-1}$ BA and $1.0mg{\cdot}L^{-1}$ NAA, both 'Jinba' and 'Moulinrouge' induced adventitious shoots that can be regenerated into plantlets. Based on these regeneration conditions, we developed an efficient $Agrobacterium$-mediated chrysanthemum 'Moulinrouge' transformation method by using sequential selection of shoots from low ($10mg{\cdot}L^{-1}$) to high ($30mg{\cdot}L^{-1}$) concentrations of kanamycin after co-cultivation of leaf explants with $Agrobacterium$ for 10 days and induction of shoots. All kanamycin resistant plants investigated with genomic PCR analysis carried the report gene, $AtSICKLE$, in their genome. Although expression levels of the report gene in the transgenic plants investigated with RT-PCR were relatively low because of inefficiency of CaMV 35S promoter in chrysanthemum, transgenic lines expressing $AtSICKLE$ efficiently showed leaf epinasty phenotype. We expect that our results will provide a useful method that can perform a high-throughput investigation of genes isolated and studied well in model plants for molecular breeding of chrysanthemum.

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.88-96
• /
• 2024

This study was conducted to determine the optimal light conditions for the in situ and ex situ conservation and restoration of Osmanthus insularis, a rare plant species in South Korea. Evaluations included the growth performance, leaf morphological features, photosynthetic characteristics, and photosynthetic pigment contents of seedlings grown from April to November under different light conditions (100%, 55%, 20%, and 10% relative light intensity). The shoot lengths and root collar diameters did not differ significantly with relative light intensity. The dry weights of leaves, stems, and roots and the leaf number were highest at 55% relative light intensity. The leaf shape showed morphological acclimation to light intensity, with leaf area decreasing and thickness increasing as the relative light intensity increased. Several leaf parameters, including photosynthetic rate and stomatal conductance at light saturation point, net apparent quantum yield, and dark respiration, as well as chlorophyll a, chlorophyll b, and carotenoid contents, were all highest at 55% relative light intensity. Under full light conditions, the leaves were the smallest and thickest, but the chlorophyll content was lower than at 55% relative light intensity, resulting in lower photosynthetic ability. Plants grown at 10% and 20% relative light intensity showed lower chlorophyll a, chlorophyll b, and carotenoid contents, as well as decreased photosynthetic and dark respiration rates. In conclusion, O. insularis seedlings exhibited morphological adaptations in response to light intensity; however, no physiological responses indicating enhanced photosynthetic efficiency in shade were evident. The most favorable light condition for vigorous photosynthesis and maximum biomass production in O. insularis seedlings appeared to be 55% relative light intensity. Therefore, shading to approximately 55% of full light is suggested for the growth of O. insularis seedlings.

• Journal of Ginseng Research
• /
• v.22 no.4
• /
• pp.244-251
• /
• 1998

KG101 was developed by the Korea Ginseng & Tobacco Research Institute. We reported about yield trials and local adaptability test. Growth characteristics and red ginseng quality of KG101 in local performance test can be summarized as follows. Aerial parts growth, stem and leaf, was similar about KG101 and Jakyungjong, 4-year old and 6-year old ginseng. Emergence rate of KG101 was higher than Jakyungjong in the 3 location of local performance test. Taproot diameter of KG101 was smaller than Jakyungjong and taproot shape of KG101 had fitted characteristics, radish type and human body type, to manufactured red ginseng. Raw ginseng grade, 1st and 2nd of KG101 was higher than Jakyungjong's. Chun, Jeesam ratio to manufacture of 2nd grade of raw ginseng of KG101 was 25%, Jakyungjong was 6-13% in 3 location of local performance test. Distribution of red ginseng weight of Jakyungiong was heavier than KG101 in 2 location, Kongju and Jungup, but KG101 was heavier than Jakyungjong in Ichon. Red ginseng quality of KG101 was better than Jakyungiong. Main degrade factor of red ginseng quality was inside cavity and inside white, was not different lines and location.

• Journal of Environmental Science International
• /
• v.21 no.8
• /
• pp.1009-1013
• /
• 2012

Leptoglossus occidentalis Heidemann, 1910 was newly recorded in Korea as a invasive species at Gyeongsangnam-do, Korea in 2010 and 2011. Leptoglossus Guerin-Meneville, 1831 is also newly recorded Coreid genus in Korea. The diagnostic shape is expanded leaf-like hind tibiae. The origin of this species is North America and it has been rapidly propagated around the world as a pest. This bug recognized as a pest on almost of Pinaceae plants and they suck on developing cones, so the monitoring on the present invasion of this species in Korea is urgent. It was presumed that the invasion of Leptoglossus occidentalis into Korea was before 2010 with present study.

• Korean Journal of Plant Taxonomy
• /
• v.50 no.2
• /
• pp.232-238
• /
• 2020

The identity of Dioscorea coreana (Prain & Burkill) R. Kunth is recognized during the re-identification process of Korean Dioscorea specimens. Given the relatively few pieces of information, including few descriptions and research papers, this species has been misidentified as D. tokoro, which has a similar leaf shape, but D. coreana is distinguished from D. tokoro by the absence of a pedicel in the male flower, the green color of the tepal, and the shapes of the fruit and seed. Thus, detailed descriptions, illustrations, and photographs of D. coreana and a key to the Korean Dioscorea, including this species, are presented.

• Mycobiology
• /
• v.46 no.2
• /
• pp.172-176
• /
• 2018

A new species belonging to the genus Alternaria was isolated from the necrotic leaf spots of Brassica rapa subsp. pekinensis in Yuseong district, Daejeon, Korea. It is an occasional isolate, not an etiological agent, which is morphologically similar to A. broccoli-italicae, but differs in conidial size and conidiophore shape. Phylogenetic analysis using the sequence datasets of the internal transcribed spacer (ITS) region of the rDNA, glyceraldehyde-3-phosphate dehydrogenase (gpd), and plasma membrane ATPase genes showed that it is distantly related to A. broccoli-italicae and closely related to Alternaria species in the section Pseudoalternaria, which belonged to a clade basal to the section Infectoriae. Morphologically, the species is unique because it produces solitary conidia or conidial chains (two units), unlike the four members in the section Pseudoalternaria that produce conidia as short branched chains. It exhibits weak pathogenicity in the host plant. This report includes the description and illustration of A. brassicifolii as a new species.

• Nuclear Engineering and Technology
• /
• v.38 no.5
• /
• pp.411-416
• /
• 2006

The Advanced Test Reactor (ATR), at the Idaho National Laboratory (INL), is one of the world's premier test reactors for providing the capability for studying the effects of intense neutron and gamma radiation on reactor materials and fuels. The physical configuration of the ATR, a 4-leaf clover shape, allows the reactor to be operated at different power levels in the comer 'lobes' to allow for different testing conditions for multiple simultaneous experiments. The combination of high flux (maximum thermal neutron fluxes of 1E15 neutrons per square centimeter per second and maximum fast [E>1.0 MeV] neutron fluxes of 5E14 neutrons per square centimeter per second) and large test volumes (up to 122 cm long and 12.7 cm diameter) provide unique testing opportunities. The current experiments in the ATR are for a variety of test sponsors - US government, foreign governments, private researchers, and commercial companies needing neutron irradiation services. There are three basic types of test configurations in the ATR. The simplest configuration is the sealed static capsule, which places the capsule in direct contact with the primary coolant. The next level of experiment complexity is an instrumented lead experiment, which allows for active control of experiment conditions during the irradiation. The most complex experiment is the pressurized water loop, in which the test sample can be subjected to the exact environment of a pressurized water reactor. For future research, some ATR modifications and enhancements are currently planned. This paper provides more details on some of the ATR capabilities, key design features, experiments, and future plans.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.29-32
• /
• 2004

In this study, we had modelled Siemens type MLC using BEAM Monte Carlo code and tested the feasibility of the modelling. To model the Primus linac MLC, we had measured the actual dimensions of MLC and each leaves, then approximated the leaf shape. VARMLC component module was used for the modelling and leakage, tongue-and-groove effect were also considered. Simulation result showed the good agreement with the film measurement.