• 한국컴퓨터게임학회논문지
• /
• 제31권4호
• /
• pp.137-144
• /
• 2018

과거 모자이크 기법은 바닥에 천을 깔고 타일을 수작업으로 붙여 제작하였다. 하지만 최근 기술의 발달로 데이터 저장 방식이 아날로그에서 디지털로 발전하여 컴퓨터를 통한 이미지 표현과 변환이 가능해지며 모자이크의 표현 기법 또한 다양하게 발전하고, 디지털로의 예술표현 방식으로도 사용되어지며 공학 분야에서도 그 제작 과정에 대한 연구들이 다양하다. 본 논문에서 제안하는 기법은 나선형으로 실시간 퍼져나가는 결정화(Crystallization)모자이크로 타일요소는 3D석영(Crystal)을 사용한다. 기존 연구들은 대체로 이미지를 좀 더 세밀하게 묘사하기 위함이 연구 목적의 주를 이루고 있지만 본 기법은 시도되지 않았던 나선 드로잉과 결정화를 접목하고 3D 공간에서의 새로운 모자이크 방식을 시도 한다. 또한 제안하는 기법의 대한 검증과 이를 기반으로 게임으로의 발전방향에 대해 모색한다. 본 기법을 바탕으로 제작된 작품 'Spiral Crystallization Photo' 는 MWU Award'18에서 Top27에 선정되었으며 Unite Seoul 2018에서 전시 되었다.

• Animal Bioscience
• /
• 제34권11호
• /
• pp.1829-1838
• /
• 2021

Objective: The effects of maternal dietary energy levels on breast muscle fibre development in offspring of broiler breeders were investigated. Methods: A total of 480 20-week-old Arbor Acres (AA) healthy female broiler breeders, with an average body weight of 2.33±0.01 kg, were randomly divided into 4 treatment groups with 6 replicates and 20 broiler breeders for each replicate and fed a corn and soybean meal diet with 100%, 80%, 70%, and 50% energy levels, respectively. Approximately 300 eggs per treatment were collected for incubation for 6 days. Then, 120 0-day-old female broilers at each energy level were randomly selected and divided into 6 replicates with 20 broilers for each replicate, with this experimental phase with the offspring lasting for 49 days. Results: Compared with the 100% energy group, the breast muscle fibre diameter at embryonic day 21 in the 80% energy group was significantly reduced (p<0.05). In the 80% energy group, the muscle fibre density of the breast increased significantly (p<0.05) at embryonic days 15 and 21. The breast muscle fibre diameter of the offspring in each group was significantly decreased (p<0.05) on the 1st day. The breast muscle sarcomere length of the embryos in the 80% energy group was significantly higher (p<0.05) than those in the 70% and 50% energy groups. Compared with the 100% energy group, the expression of the myostatin gene in the offspring was significantly decreased (p<0.05). Conclusion: In conclusion, the effects of a maternal dietary energy level of 80% in this study were found to be optimal for breast muscle fibre development in offspring, which indicated that the metabolic energy level of AA broilers of 9.36 MJ/kg for the mid-term diet for laying eggs has a more practical significance.

• 디지털융복합연구
• /
• 제17권7호
• /
• pp.115-124
• /
• 2019

본 연구는 '중소기업에서 내부 환경요인을 통한 Smart Factory의 핵심요인이 경영성과에 미치는 영향'에 대한 실증연구이다. 연구 목적은 Smart Factory 구축이 경영성과에 영향을 미쳐서 회사가 지속 발전하는데 기여하는지 검증하고, 국가적으로 추진하고 있는 Smart Factory 구축 확대 정책에 대해 제언하고자 한다. 절차는 Smart Factory를 구축한 중소제조기업의 실무자를 중심으로 설문을 받아 SPSS와 SMART PLS로 통계 분석하였다. 연구결과는 첫째, 기업 내부의 환경요인은 Smart Factory 핵심요인에 긍정적인 영향을 미쳤다. 둘째, Smart Factory 핵심요인은 경영성과에 긍정적인 영향을 미쳤다. 위의 입증을 통해서 기업의 환경요인을 고려한 Smart Factory의 핵심요인은 경영성과에 영향을 주는 것으로 나타나, Smart Factory 구축 성과의 이론적인 토대를 마련했다고 할 수 있다. 향후는 Smart Factory 구축방법 연구를 하고자 한다.

• 한국양봉학회지
• /
• 제33권4호
• /
• pp.261-268
• /
• 2018

Queen honey bees (Apis cerana) can be reared artificially on demand by the use of grafting technique. The technique consists of grafting young worker larvae into queen cell cups and raising in a queenless strong colony. As the age of grafted larvae for queen rearing exhibited several aspects related to quality and reproductive potential of queen, this study were conducted to investigate the influence of age of grafted larva on morphological characteristics and lifespan of queen, and the growth of colony she headed. Our results demonstrated that queens reared from young worker larvae (i.e., less than 1-day old larvae) were significantly larger in size (i.e., body weight and thorax width) than that of queens reared from 2-day old worker larvae. Moreover, queens reared from younger worker larvae initiated egg-laying earlier, stored more spermatozoa in spermatheca and had a longer lifespan compared to queens raised from older worker larvae. We also found a significant positive effect of queen grafting age on the production of worker and drone brood, adult worker population in colonies headed by queens reared from younger larvae. These findings suggested that rearing queens from brood grafted at the earliest possible age could increase the reproductive potential of queen as well as fitness of colony she head.

• 한국도서관정보학회지
• /
• 제50권1호
• /
• pp.177-198
• /
• 2019

본 연구는 학교도서관을 통하여 자기 선택적 독서 프로그램을 설계 운영한 후, 학생들의 독서 동기 유형을 파악하는데 있다. 본 연구의 자기 선택적 독서 프로그램은 도서 선정의 자율성 보장을 위해 다수 영역, 다수 도서의 권장도서목록으로 제공하였고, 읽기와 쓰기를 통합해 개발하였다. 프로그램 종료 후 이수 학생들을 대상으로 6개 영역의 독서 동기를 측정한 결과 자율 동기 영역이 타율 동기보다 월등하게 높은 것으로 나타났다. 자기 선택적 독서 프로그램은 권장도서목록을 활용해 도서 선정의 자율성을 보장하고, 자율동기에 따른 안정적이고 지속적인 독서 습관을 기를 수 있을 것으로 기대된다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.60-64
• /
• 2018

As the offshore wind farms increase, interest in the efficient power system configuration of submarine cables is increasing. Currently, transmission system of the offshore wind farm uses almost AC system. High temperature superconducting (HTS) power cable of the high capacity has long been considered as an enabling technology for power transmission. The HTS cable is a feasible way to increase the transmission capacity of electric power and to provide a substantial reduction in transmission losses and a resultant effect of low CO2 emission. The HTS cable reduces its size and laying sectional area in comparison with a conventional XLPE or OF cable. This is an advantage to reduce its construction cost. In this paper, we discuss the economic feasibility of the 22.9 kV HTS power cable and the conventional AC power cables for an offshore wind farm connections. The 22.9 kV HTS power cable cost for the offshore wind farm connections was calculated based on the capital expenditure and operating expense. The economic feasibility of the HTS power cable and the AC power cables were compared for the offshore wind farm connections. In the case of the offshore wind farm with a capacity of 100 MW and a distance of 3 km to the coast, cost of the 22.9 kV HTS power cable for the offshore wind farm connections was higher than 22.9 kV AC power cable and lower than 70 kV AC power transmission cable.

• 과학기술학연구
• /
• 제19권2호
• /
• pp.207-249
• /
• 2019

이 논문은 올림픽 전산시스템 개발과정을 추적하면서 공식 역사서술 이면의 다이나믹스를 보이는 것을 기본 목적으로 한다. 서울올림픽 개최가 결정된 직후 정부는 앞선 올림픽에서 사용된 전산시스템을 도입하겠다고 구상했다. 이에 KAIST 전산개발센터 과학기술자들은 독자적 개발의 당위성을 설득하는 데 큰 노력을 기울였으며, 전국체전에서 무사히 작동되는 전산시스템을 개발함으로써 충분한 개발 능력을 갖추었음을 증명해야 했다. 올림픽 전산시스템 개발을 구체화하면서 주관부처, 참여 기관, 연구자 사이에 다양한 논쟁이 발생했고, 결과적으로 최종 산물은 단일한 하나의 시스템이 아니라 여러 기관이 개발한 각기 다른 네 개의 시스템이 결합한 모듈형으로 귀착되었다. 이 때문에 "장외금메달"이라는 호평을 받았지만, 어느 기관도 올림픽 전산시스템의 기술성과를 직접적으로 계승하거나 소유권을 주장하거나 못했다. 그럼에도 불구하고 개발 과정에서 축적된 기술, 하드웨어, 인력은 이후 여러 영역으로 확산하여 한국 정보통신기술 발전의 밑거름이 되었다.

• 헤리티지:역사와 과학
• /
• 제36권
• /
• pp.69-86
• /
• 2003

This article introduce the manufacturing technique of Silla potteries based on the result excavated from Songogdong and Mulchunri site in Gyungju. As a result, we selected the kiln-site to produce Silla potteries and knew the feature which following to make them. 1. The Environmental elements to take a kiln-site were abundant fuel, plenty water and suitable soil. In particular, efficient usage of refracted winds and reserved space of forepart in the kiln-site were importantly applied to select place of kiln-site. 2. The structure of the kiln-body have been changing according to the time. It could be massproduced by produce-group from the middle and end of sixth centry which the fireplace-kiln was generalized. 3. The work center of equipments were related kiln-site. It consisted of mixed wheel, keepingpit and ditch. We knew that a look-out shed had been appeared according to utility purpose variously. 4. It sees as trimming trace of inner and outter aspects in excavated potteries and we knew that wheel had been turn to the contrast watch direction. For producing pottery of the good guality, various kiln-tools had been used already at Silla period and they used for the different purpose. 5. We intended to know method for laying the potteries in the kiln through the example of the adherent pottery to be melted. Finally, manufature and tomb-site are separated by the time through current situation of Songokdong and Mulchonri site. At the same time, we could know that group of Chounbuk kiln-site moved from the south to the north step by step.

• 한국지형학회지
• /
• 제24권3호
• /
• pp.27-45
• /
• 2017

At the upper part of terrace deposits at Jeongdongjin area, there is a structure in which reddish brown and grayish white layers laying horizontally. Previous studies have reported the existence of these structures within the deposits and suggested the theoretical background related to the formation process. However, the analysis of physical properties and chemical composition such as particle size, classification, etc. of the materials constituting the reddish brown and grayish white layers is scarcely done. In this study, the physico - chemical properties of gray - white and reddish brown beds are investigated. The mean grain size of the particles was less than $4{\varphi}$ in both layers and the reddish brown layer was more coarse. The results shows that the sorting of the grayish white layer is better. The chemical composition of both layers shows that the average concentration of $SiO_2$, $Al_2O_3$ and $K_2O$ of the grayish white layer was higher than those of the reddish brown layer. The concentration of $Fe_2O_3$ of reddish brown lyaer was 3 times higher than those of the grayish white layer. The degree of chemical weathering (CIA) is 90 or so in both the reddish brown and grayish white layers, indicating a significant level of chemical weathering. In conclusion, reddish brown layers had been formed by the processes related to the migration of iron and the migration of water that induced aggregation after the formation of sediments (psudo-gleization). In this study area, a vertical layer of grayish white which cuts off horizontal reddish brown and grayish white color was found. The vertical layer or wedge similar to a ice-wedge or columnar structure that in a cold environment, and there is a difference in shape and size. The vertical layer appears to have occurred three or more cycles. The vertical layers begin to form at a certain height within the outcrop and descend downwards, which of course is difficult to see as directing certain times.

• 한국지반환경공학회 논문집
• /
• 제12권4호
• /
• pp.43-51
• /
• 2011

연약지반에 시공하는 많은 콘크리트전주가 외부하중으로 전도파괴가 발생하는데 본 연구에서는 실물인장실험을 실시하고 근가위치, 근가깊이, 근가개수, 전주근입깊이를 달리하면서 전주에 작용하는 수평토압을 분석하였다. 실물실험은 10가지 종류로 나누어 실험한 결과 수평토압은 전주 근입깊이가 클수록 커지고 하부수동영역이 길어지는 것으로 나타났다. 근가 설치위치가 깊을수록 하부수동영역 토압이 감소된다. 변위는 근가의 위치 및 수량, 전주기초의 근입깊이에 따라 뚜렷한 차이를 나타냈다. 초기하중 재하 시 상부에서 굴절된 양상을 보이다 점증하중에 따라 전주의 중앙부로 굴절의 양상이 전이되었다. 근가위치는 G.L(-) 0.5m인 상태에서 전주기초 깊이 1.3m를 추가로 근입 시 최대 수평변위는 약 1.6배의 감소를 보여 전주의 안정성이 증가하였다.