• 제목/요약/키워드: law of 10 2times

검색결과 295건 처리시간 0.031초

고농도 용액에 침지시 감자 절편의 동력학적 탈수 모델링에 관한 연구 (Kinetic Modeling of Dewatering of Potato Slice When Soaked in Concentrated Solution)

  • 최동원;신해헌
    • 한국식품영양학회지
    • /
    • 제13권5호
    • /
    • pp.477-482
    • /
    • 2000
  • 고분자 물질 용액에 감자 절편을 침지시의 탈수현상을 설명하기 위해 (1) 비정상 상태(unsteadystate)에서의 확산 식을 초기시간에 대해 단순화시킨 모델, (2) 침지시간별로 수분확산계수와 평균확산계수를 비교하여 탈수현상을 설명하고자 한 모델, (3) 물질이동에 대한 Fick의 제2법칙을 무한평판의 조건에서 전체 시간에 대해 전개한 모델 등 3가지 모델을 가정하여 검토한 결과 PEG용액에 감자절편을 침지했을 때 물질이동의 동력학적인 해석은 Fick의 제2법칙에 근거한 모델이 잘 적용되었으며 수분의 확산계수를 추정한 결과 8$\times$$10^{-7}$~4$\times$$10^{-6}$$ extrm{cm}^2$/s 범위였다.

  • PDF

X-RAY PROPERTIES OF THE PULSAR PSR J0205+6449 IN 3C 58

  • Kim, Minjun;An, Hongjun
    • 천문학회보
    • /
    • 제45권1호
    • /
    • pp.53.2-53.2
    • /
    • 2020
  • We measure X-ray timing and spectral properties of the pulsar PSR J0205+6449. Pulsar's rotation frequency ν = 15.20102357(9) s-1 and its derivative ${\dot{\nu}}=-4.5(1){\times}10^{-11}s^{-2}$ are measured, and the pulsed spectrum of 2-30 keV is model of power law with photon index ��psr = 1.07(16) and F2-30 keV = 7.3(6) × 10-13 erg cm-2 s-1. We use thermal emission models and non-thermal model to fit the pulsar spectrum and measure the surface temperature and luminosity of the pulsar. The surface temperature T∞ = 0.5-0.8 MK and luminosity Lth = 1-5 × 1032 erg s-1 are measure, and this result verifies the previous results known to have low surface temperature and luminosity for the age range of

  • PDF

고속충격을 받는 CFRP 복합재료의 잔류강도 예측 (Prediction of Residual Strength of CFRP Subjected to High Velocity Impact)

  • 박근철;김문생
    • 대한기계학회논문집
    • /
    • 제18권3호
    • /
    • pp.600-611
    • /
    • 1994
  • The purpose of this research is to propose a model for the prediction of residual strength. For this purpose, two-paremeter model based on Caprino's is developed and formulated by the ratio of indentation due to impact and normalized residual strength. The damage zone is considered only as an indentation. Impact tests are carried out on laminated composites by steel balls. Test material is carbon/epoxy laminate. The specimens are composed of $[{\pm}45^{\circ}/0^{\circ}/90^{\circ}]_2$ and $[\pm}45^{\circ}]_4$ stacking sequence and have $0.75^T{\times}0.26^W{\times}100^L(mm) dimension. A proposed model shows a good correlation with the experimental results And failure mechanism due to high impact velocity is discussed on CFRP laminates to examine the initiation and development of damage by fractography and ultrasonic image ststem. The effect of the unidirectional ply position on the residual strength is considered here.

A SIMPLIFIED TREATMENT OF GRAVITATIONAL INTERACTION ON GALACTIC SCALES

  • Trippe, Sascha
    • 천문학회지
    • /
    • 제46권1호
    • /
    • pp.41-47
    • /
    • 2013
  • I present a simple scheme for the treatment of gravitational interactions on galactic scales. In anal- ogy with known mechanisms of quantum field theory, I assume ad hoc that gravitation is mediated by virtual exchange particles-gravitons-with very small but non-zero masses. The resulting den- sity and mass profiles are proportional to the mass of the gravitating body. The mass profile scales with the centripetal acceleration experienced by a test particle orbiting the central mass, but this comes at the cost of postulating a universal characteristic acceleration $a_0{\approx}4.3{\times}10^{-12}msec^{-2}$ (or $8{\pi}a_0{\approx}1.1{\times}10^{-10}msec^{-2}$). The scheme predicts the asymptotic flattening of galactic rotation curves, the Tully-Fisher/Faber-Jackson relations, the mass discrepancy-acceleration relation of galaxies, the surface brightness-acceleration relation of galaxies, the kinematics of galaxy clusters, and "Renzo's rule" correctly; additional (dark) mass components are not required. Given that it is based on various ad-hoc assumptions and given further limitations, the scheme I present is not yet a consistent theory of gravitation; rather, it is a "toy model" providing a convenient scaling law that simplifies the description of gravity on galactic scales.

2-Oximino-1-indanone을 이용한 Pt(IV) ion의 정량에 관한 연구 (Spectrophotometric Determination of Platinum (IV) with 2-Oximino-1-indanone)

  • 김정균;유미경;원미숙;심윤보;고영심
    • 약학회지
    • /
    • 제28권2호
    • /
    • pp.61-67
    • /
    • 1984
  • A method is described for the spectrophotometric determination of platinum (IV) with 2-oximino-1-indanone based on solvent extraction of Pt:2-oximino-1-indanone complex. The 2-oximino-1-indanone reacted with Pt(IV) to form a dark-orange complex which shows a characterisic maximum absorption at 342nm. The optimum PH for the platinum extraction lies between 5.4~8.0. Beer's law obeys up to 0.98-16.3ppm of platinum (IV) and the molar absorption coefficient is $1.06{\times}10^{-4}L.mol^{-1}.cm^{-1}$. The relative standard deviation of the method was $\times2.1%$. The composition of the complex is estimated to be Pt : In= 1 : 1, by the mole ratio method and ion exchange resin experiment. The optimum condition for the determination of platinum has been studied in detail. The 2-oximin-1-indanone is found to be a selectivereagent for the determination of platinum, since the synthesixed 2-oximino-1-indanone did not react with other metals such as cobalt, cadmium, copper, manganese nickel, iron, lead and zinc, to form the complex. In this studies, we have also clarified Sindhwani and Singh's spectrophotometric determination data of various metals with acenaphthenequinone monooxime (Talanta 20,248, 1973), whose results were not correct.

  • PDF

지중저장 이산화탄소의 누출이 천부환경에서 방연석의 용해 과정에 미치는 영향 (The Effects of CO2 Released from Deep Geological Formations on the Dissolution Process of Galena in Shallow Subsurface Environments)

  • 남지은;왕수균
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제20권1호
    • /
    • pp.19-27
    • /
    • 2015
  • If $CO_2$ stored for geological sequestration escapes from deep formations and is introduced to shallow aquifers, it dissolves into groundwater, creates acidic environments, and enhance mineral dissolution from rocks and soils. Among these minerals, dissolution and spread of hazardous trace metals can cause environmental problems with detrimental impacts on groundwater quality. This study aims to investigate geochemical effects of $CO_2$ in groundwater on dissolution of galena, the main mineral controlling the mobility of lead. A series of batch experiments are performed with granulated galena in $CO_2$ solutions under various experimental conditions for $CO_2$ concentration and reaction temperature. Results show that dissolution of galena is significantly enhanced under acidic environments so that both of equilibrium concentrations and dissolution rates of lead increase. For thermodynamic analysis on galena dissolution, the apparent rate constants and the activation energy for galena dissolution are calculated by applying rate law to experimental results. The apparent rate constants are $6.71{\times}10^{-8}mol/l{\cdot}sec$ at $15^{\circ}C$, $1.77{\times}10^{-7}mol/l{\cdot}sec$ at $25^{\circ}C$, $3.97{\times}10^{-7}mol/l{\cdot}sec$ at $35^{\circ}C$ and the activation energy is 63.68 kJ/mol. The galena dissolution is suggested to be a chemically controlled surface reaction, and the rate determining step is the dissociation of Pb-S bond of surface complex.

철탄화물의 분해속도에 미치는 Si, Mn 및 Cr 의 영향 (Effects of Si, Mn, and Cr on the dissociation rate of $Fe_3C$.)

  • 김동의
    • 한국주조공학회지
    • /
    • 제5권3호
    • /
    • pp.13-18
    • /
    • 1985
  • Decarburization phenomena were investigated at $800^{\circ}C$ by the $PH_2O/PH_2$ + Ar gas mixture in the case iron range which contains Si, Mn and Cr as an alloying elements. Dissociation of cementite in a matrix which contains graphitizer as Si begins at the carbon rich cementite dendrite arms. Several primary austenite $({\gamma})$ skeletons are surrounded by those nucleated graphite nodules, and that forms a limited area of nucleation region. Decarburization reactions at $800^{\circ}C$ in Fe-C, Fe-Mn-C and Fe-Cr-C alloy are followed by parabolic rate law under the gas mixture of $PH_2O/PH_2=0.01$ and the modified rate const. ${\kappa}$ were in the range of $1{\sim}6{\times}10^{-10}cm^2/s$.

  • PDF

전기화학증착법에 의한 $CeO_2$계 고체전해질 박막의 제조 (Preparation of $CeO_2$ Based Solid Electrolyte Thin Films by Electrochemical Vapor Deposition)

  • 박동원;김대룡
    • 한국세라믹학회지
    • /
    • 제34권10호
    • /
    • pp.1067-1073
    • /
    • 1997
  • The yttria doped ceria (YDC) thin films were fabricated by electrochemical vapor deposition on the porous $\alpha$-Al2O3 substrate. The growth rates of the films obeyed a parabolic rate law, which constant was 259.0 $m^2$/hr at 120$0^{\circ}C$. As deposition temperature (above 110$0^{\circ}C$) increased, dense thin films were enhanced. Mole fraction of XYC13 had an effect upon surface morphologies. Electrical conductivity was increased with deposition temperature. The conductivity of YDC film prepared at XYC13=7.9$\times$10-2 was about 0.097 S/cm at 104$0^{\circ}C$ and the activation energy of conduction was calculated to be 26.6 kcal/mol.

  • PDF

『황제내경(黃帝內經)』의 철학적 배경에 대한 연구 - 전국(戰國) ~ 한(漢) 시대정신(時代精神)을 중심으로 - (A Study on the Philosophical Background of HuangdiNeijing - Focused on the Spirit of the Times from Warring Country to Han -)

  • 류정아
    • 대한한의학원전학회지
    • /
    • 제30권1호
    • /
    • pp.145-166
    • /
    • 2017
  • Objectives : The paper aims to study the philosophical background of Huangdineijing by taking into account the fact that its ideas are identical to that of the period between the Warring States and Han. Methods : Through considering the period and the historical backdrop in which Huangdineijing was published, and through considering the book with other texts such as Huangdisijing, the paper draws the common spirit of the time and analyzed the cause and flow of philosophies and ideas that influenced Huangdineijing. Conclusions : 1. Books that upheld Huangdi contained within Hanshu・Yiwenzhi have a common point with the mythical symbol of Huangdi in that they are related to the rule of a nation and the creation of a civilization. Huangdi, who in Huangdineijing bears a need to be understand at this common point of view. 2. The spirit of the period between Warring States and Han can be deduced as "a movement towards unification" and "the development of a civilization infused with spirit of unification." Such spirit of time are reflected in Huangdineijing as Nine Acupuncture(Official Acupuncture) and the establishment of the measuring standards for meridian, bone, and internal organ, and the establishment of the concept of 'Pyungin.' Especially the construction of waterways that connected Huanghe and Yangzijiang river with their tributaries that formed a direct composition of unification was applied to human body in Huangdineijing, thereby establishing the concept of 'Mai'. 3. Unlike Lao Zhuang School of Taoism was not interested in the act of ruling at all, Huangdineijing and its contemporary publication Huangdisijing, present their readers with Number, Law, Rule, Regulation and Governance. Here, the philosophy and the idea which seek "Law" as the methods of ruling the nation by actively participating in the governance of the nation based on the model of natural law and rule appear. Such philosophy and idea is an evidence of the influence of Fajia in accordance with the social and realistic changes witnessed during the time.

3D 프린터를 이용한 회전 버킷이 부착된 저류조의 모형 실험 (Scaled Down Experiment of Retention Basin with a Rotatable Bucket Using 3D Printer)

  • 박성직;이창구;이제명;최원
    • 한국농공학회논문집
    • /
    • 제59권2호
    • /
    • pp.49-55
    • /
    • 2017
  • Recently climate change and urbananization have been increased surface runoff, resulting in flooding. Retention basins have been constructed to control urban flooding by reducing peak flow rate. Recently, the retention basin plays a role in controlling combined sewer overflows (CSOs) as well as urban flooding. In this study, the retention basin with a rotatable bucket was suggested and scale down experiments was performed for the optimum design of the retention basin. Scaled down model was produced using a 3D printer after it was designed as law of similarity. Two times for operating a rotary bucket is required to sweep out the sediments deposited on the bottom of the basin. Optimized dimensions for the retention basin were width of 5 m, height of 5 m, bucket radius of 0.5 m, and bottom slope of 5.0 %. It can be concluded that the results obtained from this study can be used to design the retention basin with a rotatable bucket which does not require energy to operate.