• Composites Research
• /
• 제30권6호
• /
• pp.338-342
• /
• 2017

본 논문에서는 원통형 복합재 격자구조체의 구조안전성 평가 기법에 대해 연구를 수행하였다. 구조안전성 평가는 유한요소해석을 통해 수행하였다. 구조안전성 평가를 위한 최적의 유한요소를 확인하기 위해 원통형 복합재 격자구조체 유한요소모델은 빔, 쉘 그리고 솔리드 요소를 사용해 생성하였다. 쉘과 솔리드 모델의 유한요소 해석결과는 서로 유사하게 발생되었다. 그러나 빔 모델의 경우, 쉘과 솔리드 모델의 결과와 큰 차이가 발생하였다. 이것은 빔 요소가 원통형 복합재 격자구조체 섬유 비교차부의 기계적 물성저하를 고려하지 못하기 때문이다. 원통형 복합재 격자구조체의 구조안전성 평가를 위한 유한요소해석은 쉘 또는 솔리드 요소를 사용해야 하는 것을 확인하였다.

• Composites Research
• /
• 제30권6호
• /
• pp.331-337
• /
• 2017

복합재 격자 구조물은 무게가 가볍고 비강성, 비강도가 높다는 장점이 있으며 주로 압축 하중이 작용하는 발사체구조에 적용된다. 그러나 필라멘트 와인딩 기법으로 제작되므로 섬유가 겹쳐지는 부분에서 기공과 결함이 발생하게 된다. 설계 하중 도출을 위한 해석 모델 검증을 위해 구조물의 강성, 강도 확인이 필요하지만 Full scale 시험의 경우 시간, 공간상의 제약이 따르며 구조물의 형상이 복잡하므로 시험에 어려움이 많다. 따라서 강성 확인을 위한 Subelement 단위의 시험법이 필요하다. 본 논문에서는 복합재 격자 구조물을 단위격자구조로 가공하였으며 각각 압축, 굽힘 시험을 수행하여 나선 리브, 원주 리브의 강성을 확인하였다. 휘임, 비틀림 형상을 가진 원통형 복합재 격자 구조물의 강성 평가를 위한 압축, 굽힘 시험법을 제안하였으며 유한요소해석을 수행하여 시험결과와 비교하였다.

• 소음진동
• /
• 제8권2호
• /
• pp.361-368
• /
• 1998

Complex and large lattice type structures are frequently used in design of bridge, tower, crane and aerospace structures. In general, in order to analyze these structures we have used the finite element method(FEM). This method is the most widely used and powerful tool for structural analysis. However, it is necessary to use a large amount of computer memory and computation time because the FEM resuires many degrees of freedom for solving dynamic problems exactly for these complex and large structures. For overcoming this problem, the authors developed the transfer stiffness coefficient method(TSCM). This method is based on the concept of the transfer of the nodal dynamic stiffness coefficient which is related to force and displacement vector at each node. In this paper, the authors formulate vibration analysis algorithm for a complex and large lattice type structure using the transfer of the nodal dynamic stiffness coefficient. And we confirmed the validity of TSCM through numerical computational and experimental results for a lattice type structure.

• 한국공간구조학회논문집
• /
• 제19권2호
• /
• pp.51-61
• /
• 2019

The objective of this study is to analysis the seismic response of 200m spanned honeycomb lattice domes under horizontal and up-down ground motion of El Centro earthquake. For the analysis of seismic response of the honeycomb lattice domes by rise/span ratio, the time history analysis is used for the estimation of the dynamic response. The low rise lattice dome is less deformed and less stressed than the high rise lattice dome for the earthquake ground motion. The 3-dimensional earthquake response is not significantly different the dynamic response of one directional ground motion. The earthquake response of domes with LRB isolation system is significantly reduced for the asymmetric vertical deformation and the horizontal and vertical accelerations.

• 전자공학회논문지B
• /
• 제29B권1호
• /
• pp.26-33
• /
• 1992

This paper presents lattice structure of bilinear filter and the conversion equations from lattice parameters to direct-form parameters. Billnear models are attractive for adaptive filtering applications because they can approximate a large class of nonlinear systems adequately, and usually with considerable parsimony in the number of coefficients required. The lattice filter formulation transforms the nonlinear filtering problem into an equivalent multichannel linear filtering problem and then uses multichannel lattice filtering algorithms to solve the nonlinear filtering problem. The lattice filters perform a Gram-Schmidt orthogonalization of the input data and have very good easily extended to more general nonlinear output feedback structures.

• 한국소음진동공학회논문집
• /
• 제17권7호
• /
• pp.662-667
• /
• 2007

A new neuro-control scheme for active control of structures is proposed. It utilizes lattice pattern of state vector as training data of probabilistic neural network(PNN). Therefore. it is the so-called lattice probabilistic neural network(LPNN). PNN makes control forces by using all the training patterns. Therefore, it takes much time to obtain a control force in application. This inevitably may delay the control action. However. control force of LPNN is calculated by using only the adjacent information of LPNN input. So, the response of LPNN is greatly faster than PNN. The proposed control algorithm is applied for three story building under California and El Centro earthquakes. Also, control results of the LPNN are compared with those of the conventional PNN. The structural responses have been suppressed effectively by the proposed algorithm.

• Steel and Composite Structures
• /
• 제19권5호
• /
• pp.1321-1331
• /
• 2015

A square steel sandwich plate with lattice corrugated core is explored for damping improvement. A range of damping materials are filled inside the openings provided by the corrugated core, or are applied on the surfaces of the facesheets. The dynamic properties such as natural frequency and damping factor are experimentally measured for the sandwich plate with each filling solution. The relative performance of each insertion is compared in terms of damping capacity and added mass.

• Korean Journal of Mathematics
• /
• 제26권3호
• /
• pp.503-517
• /
• 2018

Keeping in view the expediency of soft sets in algebraic structures and as a mathematical approach to vagueness, in this paper the concept of lattice ordered soft near rings is introduced. Different properties of lattice ordered soft near rings by using some operations of soft sets are investigated. The concept of idealistic soft near rings with respect to lattice ordered soft near ring homomorphisms is deliberated.

• 한국공간구조학회논문집
• /
• 제13권4호
• /
• pp.75-81
• /
• 2013

The circular hollow section is usually used for member of main frame to carry the external load in single layer lattice dome. But, the H-shaped section may be used for member of main frame since it is convenient for attaching roof panels. Single layer lattice domes have various buckling characteristics, such as the overall buckling, the member buckling, and nodal buckling. The purpose of this study is to compare buckling characteristics of single-layer lattice domes in which the H-shaped steel section as the existing domestically-produced structural steel is used as main frames to those of domes in which a circular hollow section is used as main frames.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.169-175
• /
• 1997

Recently it is increased by degrees to produce complex and large lattice structures such as bridge, tower, crane, and space structures. In general, in order to analyse these structures we have used finite element method(FEM). In this method, however, it is necessary to use a large amount of computer memory and to take long computation time. For overcoming this problem, the Authors have developed the transfer dynamic stiffness coefficient method(TDSCM) which consists on the concept of the substructure synthesis method and transfer influence coefficient method. In this paper, the new free vibration analysis method for large type lattice structure is formulated by the TDSCM. And the results obtained by TDSCM are compared with those obtained by FEM, transfer matrix method and experiment. And it is confirmed for TDSCM to be the numerical high accuracy and high speed structure analysis method.