• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3703-3716
• /
• 2022

Target alignment technology is one of the most critical technologies in laser fusion experiments and is an important technology related to the success of laser fusion experiments. In this study, by combining the open-loop and closed-loop errors of the target alignment, the Kalman state observer is used to estimate the position of the target, which improves the observation precision of the target alignment. Then the optimized result is used to guide the alignment of the target. This method can greatly optimize the target alignment error and reduce uncertainty. With the improvement of the target alignment precision, it will greatly improve the reliability and repeatability of the experiments' results, thereby improving the success rate of the experiments.

• Journal of Information Display
• /
• v.8 no.1
• /
• pp.6-9
• /
• 2007

Orientational alignment patterns have been proven to be that they are very useful for realizing diverse properties of liquid crystals. Here we produced the patterns combining interfered laser beams. A photo-isomerizable polymer including azo unit, which induces nematic liquid crystal alignment to the polarized laser light, was used as the alignment to layer. Double irradiations into two orthogonal directions brought the orientation patterns similar to the checkerboard. It indicates the possibility of bistability on those patterns.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.537-543
• /
• 2014

RLG(Ring Laser Gyroscope) is a main device of LINS(Laser Inertial Navigation System). RLG has the lock-in region in which there is no output signal. To alleviate the lock-in problem, a mechanical oscillation, the dither motion, is applied on RLG. A LPF(Low Pass Filter) is usually used on the output of RLG and accelerometer to remove the noise that is made by the dither motion. When the LINS is induced the disturbance during the initial alignment, it takes more time on alignment due to the use of the LPF and a fixed gain controller. In this paper, an initial alignment using UKF(Unscented Kalman Filter) is designed and analysed. Analysis include comparison between conventional initial alignment loop using fixed gain type controller and proposed initial alignment using UKF. Moreover, Disturbance inducing test results are demonstrated.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.622-635
• /
• 2009

Laser Inertial Navigation System(LINS) consists of Ring Laser Gyroscopes(RLG) and accelerometers. RLG has a lock-in region in which there is zero output for input angular rates less than about 0.1deg/sec. The lock-in region is generated by the imperfect mirrors in RLG. To avoid the lock-in region, a sinusoidal motion called dither motion is applied on RLG. Therefore this dither motion is measured by RLG/accelerometer even if at a stop state. In this situation, the performance on the initial alignment of LINS can be degraded. In this paper, we analyze the performance on the initial alignment of LINS theoretically and experimentally. Analysis results include how dither motion, the pre-filter and the corner frequency in alignment loop affects the performance on the initial alignment of LINS.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.838-841
• /
• 2006

Orientational alignment patterns proved that they are very useful for realizing diverse properties of liquid crystals. Here we tried to produce the patterns combining interfered laser light and double irradiations. A photo-isomerizable polymer doped with azo dye, which induce uniform liquid crystal alignment to the uniform laser irradiation, was used as the alignment layer. Double irradiations into two orthogonal directions brought the orientation patterns similar to the checkerboard. It indicates the possibility of bistability on those patterns.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.6
• /
• pp.577-590
• /
• 2021

In this paper, we theoretically analyzed the self-alignment/navigation performance in the accelerometer resonance state generated by dither motion of ring laser gyroscope in LINS and verified it through simulation. As a result of analysis, it is confirmed that the amplitude of the accelerometer measurement amplified in the accelerometer resonance state is decreased in the process of sampling per the navigation calculation period and that frequency is changed by the aliasing effect too. It was also analysed that the attitude error in self-alignment is determined by the amplitude/frequency of the accelerometer measurement, the gain of the self-alignment loop, and the velocity and position error in the navigation is determined by the amplitude/frequency/phase error of the accelerometer measurement. This analysis and simulation results show that the self-alignment and navigation performance is not be degraded only when the amplification factor of the accelerometer measurement in the accelerometer resonance state is 3 or less

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.1056-1060
• /
• 1997

An optical technique to align the laser beam with the rotation axis of a cylindrical microstructure is developed for laser microfabrication. The sample surface is first set normal to the rotation axis by applying a simple reflection law of geometrical optics and then the laser beam is aligned with the rotation axis using translation stages with quadrant photodiodes. Principle and the configuration of the alignment technique are described. An application of the present technique to laser microstereolithography showed that it could be effectively used for fabrication of micro cylindrical structures.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.369-372
• /
• 2004

Photo-induced surface alignment is charming as a non-contact photo-patternable alignment technology which can be used in the next generation of displays, such as large area, multi-domain. For decades, many polymer film have been investigated and developed to be used in the photo alignment. Among these photoreactive materials, recently developed polyimide, Chloromethylated Polyimide(CMPI) now became the focus of interests in this area because of its high photosensitivity and superior thermal stability. In this report, we present micro patterning method to form the nanoscale structure by Mask-Less laser patterning using this CMPI film and NSOM probe.

• ETRI Journal
• /
• v.27 no.4
• /
• pp.446-448
• /
• 2005

Using tightly focused femtosecond laser pulses, we produce an optical waveguide and devices in transparent materials. This technique has the potential to generate not only channel waveguides, but also three-dimensional optical devices. In this paper, an optical splitter and U-grooves, which are used for fiber alignment, are simultaneously fabricated in a fused silica glass using near-IR femtosecond laser pulses. The fiber- aligned optical splitter has a low insertion loss, less than 4 dB, including an intrinsic splitting loss of 3 dB and excess loss due to the passive alignment of a single-mode fiber. Finally, we present an output field pattern, demonstrating that the splitting ratio of the optical splitter becomes approximately 1:1.

• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.245-251
• /
• 2022

We have developed a multi-channel fiber laser for tiled laser beam combining and a laser output array system for multi-beam alignment. The fiber laser is a master oscillator power amplifier configuration that has a common seed, a preamplifier, and a 7-channel amplifier. The output power of each channel is more than 10 W. The laser output array system is a packed cylindrical configuration for a high fill-factor, and it has capabilities for collimation and tilt control with built-in PZT. Multi-beam alignment to a target is successfully implemented using PZT controlled with a stochastic parallel gradient descent (SPGD) algorithm.