• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.3980-3990
• /
• 1996

When a moist air is rapidly expanded in a supersonic nozzle, nonequilibrium condensation occurs at a supersaturation state. Condensation shock wave appears in the nozzle flow if the releasing latent heat due to condensation goes beyond a critical value. It has been known that self-excited oscillations of the condensation shock wave generate in an air or a steam nozzle flow with a large humidity. In the present study, the passive control technique using porous wall with a cavity underneath was applied to the condensation shock wave. The effects of the passive control on the steady and self-excited condensation shock waves were experimentally investigated by Schlieren visualization and static pressure measurements. The result shows that the present passive control is a useful technique to suppress the self-excited oscillations of condensation shock wave.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.360-360
• /
• 2011

우리나라의 극치강수량 발생 특성은 6~8월 사이에 몬순시스템에 의해 영향을 많이 받는다. 이러한 동아시아 몬순시스템은 대규모 기상학적 거동으로서 우리나라의 국지적 강수발생 특성과 매우 큰 연관성을 가지고 있다. 우리나라의 극치강수량 발생 시에 나타나는 기상학적 특징을 진단하는 과정은 수문 기상학적으로 극치강수량을 예측할 수 있는 기본 토대를 제공할 수 있다. 이러한 점에서 본 연구에서는 우리나라에 발생한 극치강수량을 순위별로 추출하고 각 순위별로 극치강수량 발생시점을 중심으로 5일 이전의 기상변량을 NOAA 재해석(reanalysis) 자료로부터 추출하고 이를 합성시켜 기상특성을 평가하였다. 극치강수량의 기상학적 거동을 평가하기 위한 방법은 다음과 같다. 첫째, 기상변량으로는 Sea Level Pressure, Wind Vector, Geopotential Height 등을 추출한다. 둘째, 이들 기상자료로부터 대규모 강우장만을 추출하기 위해서 기준값(threshold)을 가지고 특정량 이상의 Storm Track만을 추출한다. 셋째, 이들 Storm Track들을 분류하여 범주화 시킨다. 넷째, 범주화된 Storm Track 별로 강수량 분포, 강수지속시간 등에 대한 확률 분포를 유도한다. 또한 이들 Storm Track에 패턴인식 기법을 적용하여 Storm Track의 이동경로를 추정할 수 있는 알고리즘을 개발하고자 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.495-496
• /
• 2014

The suction method is the substructure installation using the water pressure difference generated by discharging water inside the pile by the pumping operation, after the intrusion by the self-weights of a large hollow steel pipe or a concrete structure. It is known as the low-noise and low-vibration method against the general pile driven method and eco-friendly, also. Most current design and safety assessment of the support structure and considering only the static load, however, the importance of dynamic behavior becomes magnified as the size of wind power generator increases. This study measures the natural frequency of the suction pile prototype about the penetration depth as a part of basic research and analyzed the interaction between the soil and the structure.

• 설비공학논문집
• /
• 제23권12호
• /
• pp.828-835
• /
• 2011

The purpose of this study is to analyze and evaluate the 3 types of indoor ventilation methods such as natural, mechanical, and hybrid ventilation in high-rise building which is affected by stack effect and outdoor air pressure. For the evaluation of the ventilation capacity, CFD simulation was performed in a typical high-rise residential building. The results of the simulations are as follows: 1) Natural ventilation method is not enough to the regulation. 2) In case of mechanical ventilation, congested area is occurred but meets the regulation. 3) In case of hybrid ventilation with stack effect, all the areas of indoor meet the regulation and congested area is reduced. 4) In case of high-rise building, the differences of ventilation rate among houses in the building are not large because the mechanical ventilation is main factor.

• 한국항공우주학회지
• /
• 제49권1호
• /
• pp.41-52
• /
• 2021

발사체가 대기 중에서 상승 비행 시 공기역학적 현상에 기인한 음향하중을 받는데 천음속 영역에서 그 영향이 커진다. 본 연구에서는 천음속 조건에서 해머헤드 발사체 외부에 작용하는 음향하중을 ��-ω SST 난류모델 기반 IDDES 법으로 해석하여 시간 평균 압력계수, 표면 압력섭동, 압력섭동 파워 스펙트럼을 분석하고 가용한 풍동실험 데이터와 비교하였다. IDDES 결과의 격자 의존성을 검토하였으며, 난류 스케일 분해가 가능한 적절한 계산격자를 사용한 경우 천음속 헤머헤드 발사체의 특징적인 유동 현상인 페어링 어깨에서의 유동 박리와 박리 유동의 후방 동체 재 부착, 보트 테일 후방에서의 높은 압력섭동을 공학적으로 유의미한 정확도로 예측 가능함을 확인하였다.

• Wind and Structures
• /
• 제26권5호
• /
• pp.293-304
• /
• 2018

A numerical study is conducted on the flow characteristics of a rectangular cylinder (chord-to-width ratio C/W = 2 - 10) mounted close to a rigid wall at gap-to-width ratios G/W = 0.25 - 6.25. The effects of G/W and C/W on the Strouhal number, vortex structure, and time-mean drag and lift forces are examined. The results reveal that both G/W and C/W have strong influences on vortex structure, which significantly affects the forces on the cylinder. An increase in G/W leads to four different flow regimes, namely no vortex street flow (G/W < 0.75), single-row vortex street flow ($0.75{\leq}G/W{\leq}1.25$), inverted two-row vortex street flow ($1.25<G/W{\leq}2.5$), and two-row vortex street flow (G/W > 2.5). Both Strouhal number and time-mean drag are more sensitive to C/W than to G/W. For a given G/W, Strouhal number grows with C/W while time-mean drag decays with C/W, the growth and decay being large between C/W = 2 and 4. The time-mean drag is largest in the single-row vortex street regime, contributed by a large pressure on the front surface, regardless of C/W. A higher C/W, in general, leads to a higher time-mean lift. The maximum time-mean lift occurs for C/W = 10 at G/W = 0.75, while the minimum time-mean lift appears for C/W = 2 at the same G/W. The impact of C/W on the time-mean lift is more substantial in single-row vortex regime. The effect of G/W on the time-mean lift is larger at a larger C/W.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.1658-1663
• /
• 2015

실내의 습도제어를 위하여 공조기 내에는 가습소자가 설치된다. 지금까지 대부분의 가습소자는 유리섬유로 만들어진 외제품이 널리 사용되어 왔다. 본 연구에서는 이 외제품을 대체할 셀룰로오스와 PET 복합체로 만들어진 가습소자를 개발하고 유리섬유로 만들어진 Glasdek 소자의 성능과 비교하였다. 시험은 소자를 항온항습실 내에 설치된 흡입식 풍동입구에 설치하고 물질전달량과 압력손실을 측정하였다. 실험결과를 $j_m$과 f인자로 나타내었을 때, 개발품의 $j_m$값이 33%~39%크고, f인자는 개발품이 0%~51% 작게 나타났다. Glasdek에 비하여 개발품의 $j_m$값이 큰 이유는 흡수도가 월등히(50% 가량) 크기 때문이고 f인자가 작은 이유는 소자 표면이 확연히 매끄럽기 때문이다. 한편, 동일 소비동력 대비 물질전달을 나타내는 $j_m/f^{1/3}$ 의 경우, 개발품이 약 36~63% 크게 나타났다.

• Structural Engineering and Mechanics
• /
• 제49권6호
• /
• pp.705-726
• /
• 2014

In general, cylindrically curved plates are used in ships and offshore structures such as wind towers, spa structures, fore and aft side shell plating, and bilge circle parts in merchant vessels. In a number of studies, it has been shown that curvature increases the buckling strength of a plate under compressive loading, and the ultimate load-carrying capacity is also expected to increase. In the present paper, a series of elastic and elastoplastic large deflection analyses were performed using the commercial finite element analysis program (MSC.NASTRAN/PATRAN) in order to clarify and examine the fundamental buckling and collapse behaviors of curved plates subjected to combined axial compression and lateral pressure. On the basis of the numerical results, the effects of curvature, the magnitude of the initial deflection, the slenderness ratio, and the aspect ratio on the characteristics of the buckling and collapse behavior of the curved plates are discussed. On the basis of the calculated results, the design formula was developed to predict the buckling and ultimate strengths of curved plates subjected to combined loads in an analytical manner. The buckling strength behaviors were simulated by performing elastic large deflection analyses. The newly developed formulations were applied in order to perform verification analyses for the curved plates by comparing the numerical results, and then, the usefulness of the proposed method was demonstrated.

• 한국방재안전학회논문집
• /
• 제16권4호
• /
• pp.19-31
• /
• 2023

미래 기후 시나리오에 따르면 우리나라 자연재해의 주요 요인인 태풍의 강도는 강해질 것으로 전망된다. 태풍 강도 증가는 내습 파고 상승으로 이어져 주거, 산업, 관광 등의 용도로 인구 및 건물 밀집도가 높은 연안 지역의 대규모 피해발생 가능성이 높은 상황이다. 따라서 본 연구에서는 동해 해양기상부이 관측자료를 분석하여 최대 유의파고가 나타난 태풍 마이삭(202009) 내습 기간에 대해 파랑추산 수치모형실험을 수행하였다. 파랑추산실험 경계조건은 JMA-MSM의 바람장과 SSP5-8.5 미래 기후 시나리오의 태풍 중심기압 감소율을 적용한 바람장을 사용하였다. 파랑추산실험 결과 SSP5-8.5 시나리오에서 속초항 방파제 전면에서의 파고는 4.06 m에서 4.68 m로 15.27% 증가하였다. 또한, 심해설계파 147-2 격자점 위치에서의 재현빈도는 최소 2배 이상 증가하는 것으로 산출되어, 현재 해안구조물 설계 시 관행적으로 적용하는 50년 재현빈도 심해설계파에 대한 제고가 필요하다.

• 대기
• /
• 제30권4호
• /
• pp.377-390
• /
• 2020

Not only emissions, but also atmospheric circulation is a key factor that affects local particulate matters (PM) concentrations in Korea through ventilation effects and transboundary transports. As part of the atmospheric circulation, air stagnation especially adversely affects local air quality due to weak ventilation. This study investigates the large-scale circulation related to air stagnation over Korea during winter and projects the climate change impacts on atmospheric patterns, using observed PM data, reanalysis and regional climate projections from HadGEM3-RA with Modified Korea Particulate matter Index. Results show that the stagnation affects the PM concentration, accompanied by pressure ridge at upper troposphere and weaken zonal pressure gradient at lower troposphere. Downscaling using HadGEM3-RA is found to yield Added-Value in the simulated low tropospheric winds. For projection of future stagnation, SSP5-8.5 and SSP1-2.6 (high and low emission) scenarios are used here. It has been found that the stagnation condition occurs more frequently by 11% under SSP5-8.5 and by 5% under SSP1-2.6 than in present-day climate and is most affected by changes in surface wind speed. The increase in the stagnation conditions is related to anticyclonic circulation anomaly at upper troposphere and weaken meridional pressure gradient at lower troposphere. Considering that the present East Asian winter monsoon is mainly affected by change in zonal pressure gradient, it is worth paying attention to this change in the meridional gradient. Our results suggest that future warming condition increase the frequency of air stagnation over Korea during winter with response of atmospheric circulation and its nonlinearity.