• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.175-178
• /
• 1997

This study was carried out to obtain an analytical expression for the specifications of the Stewart Platform that minimize the maximum force acting on the hydraulic cylinder. The position and orientation of the platform were calculated by means of the inverse kinematic analysis. The maximum force to be exerted on a cylinder was calculated using the Newton's second law for the case when the platform is moved along a horizontal axis with 0.6 g, the maximum translational acceleration possible. This paper suggests a mathematical model to minimize the maximum actuating force using radius and angle ratios as design variables. Finally, a fuzzy set for the minimum actuating force is proposed for this dynamic optimal design problem.

• 로봇학회논문지
• /
• 제6권1호
• /
• pp.78-85
• /
• 2011

This article investigates kinematic characteristics of a Sch$\ddot{o}$nflies motion generator which represents a mechanism having translational three Degree-of-Freedom (DOF) and rotational one-DOF motion about a fixed axis. The mechanism consists of the base plate and the moving plate, and four identical limbs connecting them. Each limb employs two revolute joints (RR), one parallelogram (Pa), and two revolute joints (RR) from the base plate to the moving plate. The mechanism is driven by four actuators which are placed on the base plate to minimize dynamic loads. It is shown through simulations that the mechanism can be designed to secure large dexterous workspace and thus has very high potential for actual applications such as haptic devices and high-speed requiring tasks such as pick-and-place operations, riveting, screwing tasks, etc.

• 산업기술연구
• /
• 제19권
• /
• pp.43-50
• /
• 1999

Vehicle suspensions can be regarded as interconnection of rigid bodies with kinematic joints and compliance elements such as springs, bushings, and stabilizers. Design of a suspension system requires detailed specification of the interconnection point (or so called hard points) and characteristic values of compliance elements. During the design process, these design variables are determined to meet some prescribed performance targets expressed in terms of SDFs (Static Design Factors), such as toe, camber, compliance steer, etc. This paper elaborates on a systematic approach to achieve optimum design of suspension systems.

• International Journal of Control, Automation, and Systems
• /
• 제4권5호
• /
• pp.575-591
• /
• 2006

In a previous research, we presented the Grid Method and confirmed it as a systematic and efficient problem formulation method for the task-oriented design of robot kinematics. However, our previous research was limited in two ways. First, it gave only a local optimum due to its use of a local optimization technique. Second, it used constant weights for a cost function chosen by the manual weights tuning algorithm, thereby showing low efficiency in finding an optimal solution. To overcome these two limitations, therefore, this paper presents a global optimization technique and an adaptive weights tuning algorithm to solve a formulated problem using the Grid Method. The efficiencies of the proposed algorithms have been confirmed through the kinematic design examples of various robot manipulators.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.384-388
• /
• 2016

This paper proposed a m.Sketch to search the optimal link lengths for a legged walking robot. In order to apply the m.Sketch for the proposed, set the design parameters of the constraints and use the m.Skecth to get optimal GL(Groud Length) and GAC(Ground Angle Coefficient). The legged robot designed based on four-bar linkage theory and Theo Jansen mechanism. The stride length of the legged walking robot was defined based on the proposed kinematic analysis. Use the Edison Design m.Sketch simulate and find the optimal link length having the best of the Ground Length (GL) and Ground Angle Coefficient(GAC). And use these length implemented the Theo Jansen mechanism both in Science box parts and acrylic. In addition to the further expansion of the legs to reach the goaltranslating heavy objects or person.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.525-530
• /
• 1995

The main objective of this study is to develop a gripper mechanism that can be employed for assembly and removal tasks of a nozzle-dam of steam gererator which is one of the nuclear reactor maintenance process. Brief description of the open-close type gripper mechanism, its postion analysis, and its kinematic amalysis are given. The optimal design of the gripper mechanism with slipping on its two gripping surfaces is considered. As an optimaldesign index, the ratio of the actuator force of prismatic cylinder to gripping load is proposed. Then, based on this index the optimal design synthesis is careied out to identify values of optimal design parameters for the gripper mechanism.

• 제어로봇시스템학회논문지
• /
• 제6권1호
• /
• pp.66-72
• /
• 2000

As the demand for the design of modular manipulators or special purpose manipulators has increased, task based design to design an optimal manipulator for a given task become more and more important. However, the complexity with a large number of design parameters, and highly nonlinear and implicit functions are characteristics of a general manipulator design. To achieve the goal of task based design, it is necessary to develop a methodology to solve the complexity. This paper addresses how to determine the kinematic parameters of a two-degrees of freedom manipulator with parallelogram five-bar link mechanism from a given task, namely, how to map a given task into the kinematic parameters. With simplified example of designing a manipulator with five-bar link mechanism, the methodology for task based design is presented. And it introduces formulations of a given task and manipulator specifications, and presents a new dexterity measure for manipulator design. Also the optimization problem with constraints is solved by using a genetic algorithm that provides robust search in complex spaces.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.171-177
• /
• 2010

This paper presents the development of a new 6-DOF parallel-kinematic motion simulator. The moving platform is connected to the fixed base by six P-S-U (Prismatic-Spherical-Universal) serial chains. Comparing with the well-known Gough-Stewart platform-type motion simulator, it uses commercialized linear actuators mounted at the fixed base whereas a 6-UPS manipulator uses telescopic linear ones. Therefore, the proposed motion simulator has the advantages of easier fabrication and lower inertia over a 6-UPS counterpart. Furthermore, since most forces acting along the legs are transmitted to the structure of linear actuators, smaller actuation forces are required. The inverse position and Jacobian matrix are analyzed. In order to further increase workspace, inclined arrangement of universal joints is introduced. The optimal design considering workspace and force transmission capability has been performed. The prototype motion simulator and PC-based real-time controller have been developed. Finally, position control experiment on the prototype has been performed.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.68-74
• /
• 1998

Performance and efficiency of deep seabed collector is a primary factor for feasibility of commercial deep ocean mining. The efficiency of manganese nodules collector depends on vehicle mobility relative to undulating seafloor and is attributed pickup head to keep altitude and elevation of it against seafloor. For this reason, motion control of pickup head relative to the changing deep-sea topography and other disturbances is of particular importance in design of pickup device. The concept of design axiom is applied to a pickup device of hybrid type in order to evaluate the concept design. Kinematic analysis conducted in absolute Cartesian coordinates gives position, velocity, and acceleration of the hydraulic cylinders which enable the pickup head to keep the preset optimal distance from seafloor. Inverse dynamic analysis provides the driving forces of hydraulic cylinders and the reaction forces at each joint. Design sensitivity analysis is performed in order to investigate the effects of possible design variables on the change of the maximum strokes of hydraulic cylinders. The direct differentiation method is used to obtain the design sensitivity coefficients.

• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.306-311
• /
• 2017

본 논문은 자동차 현가장치의 기구적 특성에 대한 설계 최적화에 관한 것이다. 현가장치의 기구적 특성은 토우 및 캠버와 같은 바퀴의 자세를 결정하며 이것은 주행 중 타이어의 마모에 관련될 뿐만 아니라 차량의 운동성능인 조종안정성에 큰 영향을 미친다. 따라서 설계 초기단계에서 현가장치 기구의 특성을 결정하는 것은 매우 중요한 일이다. 본 논문에서는 맥퍼슨 스트러트식 현가장치에 대한 현가장치의 기구적 특성을 파악하기 위하여 변위해석을 수행하였다. 이를 위해 현가장치 기구를 구성하는 조인트에 대한 구속방정식을 세우고 이를 풀 수 있는 프로그램을 작성하였다. 또한 원하고자 하는 현가장치의 기구적 특성을 얻기 위하여 설계 최적화 프로그램인 ADS를 이용하였다. 최적화를 위한 설계변수로서 현가장치의 차체 부착점인 하드 포인트의 좌표로 설정하였으며 목표함수로서 바퀴의 상하운동에 대한 토우-인의 합으로 정의하였다. 구속함수로서 설계 시 제한조건인 최대 캠버각과 최저 롤 중심고를 고려하였다. 본 연구의 결과로서 두 가지 구속함수를 만족하고 토우-인의 변화를 최소로 하는 하드 포인트의 최적위치를 결정할 수 있었다.