• 한국산업융합학회 논문집
• /
• 제9권1호
• /
• pp.73-78
• /
• 2006

Constructing a long, linear structure such as a high-way may cause the break-up of the natural ecology by cutting off the trails of animals. We could observe 12 kinds of mammals, 49 kinds of birds and 10 kinds of amphibia and reptilia at the research area. With this research, we were so sure of the necessity of building ecological corridors to prevent the ecological break-up of wild animals that we studied the building and maintaining of 3 types of ecological corridors; tunnel types, over-bridge type and line type.

• 패션비즈니스
• /
• 제7권1호
• /
• pp.160-178
• /
• 2003

Recently, the field of university PR(public relations) and UI(university identity) come to be emphasized as a remarkable one because the applicants to the universities are consistently reduced in Korea. The purpose of this thesis is to present a souvenir for university PR which is designed in a clothing commodity, easily accessible to visitors, helping students and university officials to keep a pride to our university. We have designed four kinds of clothing, ie T-shirts, polo-shirts, trousers, and hats, after scrutinizing those of other universities. By making change the length of sleeves and slacks, the four kinds were transformed into eight kinds of clothing commodities. The basic trend of this design is on the trompe l'oeil, with the colors being white, grey and black ones, which are of 100% cotton.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.108-117
• /
• 2003

Development of advanced restraint system challenges both restraint and automobile manufacturers to come up with proper airbag design to reduce occupant out-of-position related injury. The important component of the advanced restraint system is the multi stage inflator. The multi stage inflator can independently control two or more airbag inflation stages to maximize occupant protection. The objective of this research is to develop relationship between airbag inflation characteristics, the occupant positions and the airbag design variables. The tests are conducted using five kinds of inflators, two kinds of airbag cushion folding methods and two kinds of tear lines. In the case of inflator, the out-of-position tests are performed with a traditional inflator, a depowered inflator and a dual stage inflator. And the efficiency and injury mechanism are evaluated by analyzing the injury pulses and values. Using this relationship, airbag design guideline is established for airbag aggressivity thresholds and the risk of injury is identified according to occupant positions.

• 생약학회지
• /
• 제2권3호
• /
• pp.125-156
• /
• 1971

The nation-wide medicinal plants list is prepared on the basis of the collected plant samples from 22 places of 9 regions where the authors possiblely surveyed and the references on field survey reported by others. No one has reported this kind of list before and the Engler's classification system is applied in this list instead of the previously applied Nakai's classification system. And also Korean name, occurrence, distribution, medicinal part, and name of crude drugs are described in the list. According to the results of this study, the number of the natural and cultivated medicinal plants in Korea are 950 kinds presently; i.e., 719 species, 1 subspecies, 209 varieties, 1 subvariety and 20 formas which belong to 142 families and 437 genera. Out of the 950 medicinal plants, cryptogamae are 22, herbs 550 and woodies are 278. The usual common drugs are 284 kinds and the allied plants are estimated 160 kinds. And there are some folk medicines and un-utillized medicinal plants.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.757-760
• /
• 2002

In this study, 3 kinds of holes (square, circular and elliptic holes) are attempted on a cantilever to reduce the weight by 30%. Maximum Von-Mises stresses of cantilever plate with 3 kinds of holes are investigated. For the elliptic holes, a shape optimization is attempted to fad the optimum angle of axis by rotating the axis by $10^{\circ}\; from\; 50^{\circ}\; to\; 120^{\circ}\;$ From the results, it is known that the maximum stress is decreased to 0.868 MPa by rotation of the axis of elliptic hole and 0.26 MPa is decreased compared with the maximum stress occurred on the circular hole.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.836-839
• /
• 2006

This paper presented comparison of vibration characteristics of a 5-ton truck at the two kinds of rear axle suspension, a conventional leaf spring suspension and an air spring suspension. Vibration at the selected location in the freight compartment and the rear axle were measured while the vehicle was running on various kinds of road at the specified speed. At all kinds of the driving conditions used in the test the air spring suspension showed good performance of vibration attenuation, especailly at the frequency range of under 5 Hz.

• 한국가금학회지
• /
• 제8권1호
• /
• pp.25-30
• /
• 1981

This study was conducted to find the method that the least-cost formula can be determined thus allowing a better keeping of raw material supplies under the constraints having to be used some raw materials that are either in limited supply or for other reason in restricted use. In this study, it was considered that three kinds of feed were produced under limited supply of six kinds of raw materials, and data for the analysis were collected from a feed mill in southern part of Korea. According to the result of this study, it was proved better to determine the least-cost formula as the multi-mix problem than as the simple least-cost problem when more than two kinds of feed were produced wilt limited supply of raw materials.

• 생명과학회지
• /
• 제9권4호
• /
• pp.481-488
• /
• 1999

This study was conducted to survey some characteristics in growth of perilla by fertilization level organic matter. Corn stalk, acorn and chestnut were used as organic fertilizer in this study. In the height of perilla, chestnut fertilizer with 880kg/10a that R2 is 0.9996 showed the height level, and followed by acorn and corn stalk in order. Number of the harvested leaves was the highest in acorn among the three organic fertilizer by chestnut and corn stalk in order. However, number of the harvested leaves continuously was the highest in chestnut. Weight of a leaf was more effective at three kinds of organic fertilizer than control. There were no difference in the rate of dried leaf weight according to kinds of organic fertilizer. On the other hand, the rate of dried leaf weight by growth period was different. It was found that the rate of dried leaf in 30days or 110days. Diameter of perilla stem at 30cm above the ground according to kinds and fertilizer level of organic fertilizer was surveyed. However, the difference was not detected in this study.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.529-532
• /
• 2001

In this paper, rust-protection performance of concrete using ground granulated blast-furnace slag are discussed. 4 kinds of W/B in combination with 3 kinds of replacement ratio of ground granulated blast-furnace slag and 2 kinds of chloride ion contents of are selected as experimental parameters. According to the experimental results, as the replacement ratio of ground granulated blast-furnace slag is increased, the corrosion area of steel bar tends to be decreased. However, as the autoclave cycle and chloride ion contents are increased, the corrosion area of steel bar is increased. In conclusion, when the replacement ratio of ground granulated blast-furnace slag is 50%, the strength and rust-protection performance appear to be most excellent.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.660-663
• /
• 2004

This paper investigate the qualities variety of concrete using recycling water under various kinds and contents of saccaric based stabilizing agent(SSA). Fluidity had little changes with the kinds and contents of SSA. Air contents of concrete with recycled water only shows the tendency. With an increase in SSA contents, air content recovered. For bleeding properties, bleeding shows to be decreased with an increase in SSA contents. The use of recycled water accelerated the setting time. However, with an increase in SSA, setting time showed the similar level of plain concrete. SSA (Btype) had better performance in enhancing compressive strength owing to loss of air content. Although the use of recycled water increased the drying shrinkage compared with that of plain concrete, it tended to decrease with an increase in SSA.