• Journal of the Korean Wood Science and Technology
• /
• v.49 no.1
• /
• pp.82-92
• /
• 2021

Nakdong technique is an unfamiliar scorching treatment using an iron heated in a kiln over 1000℃. It is a typical convention in Asian countries to treat Nakdong on the surface of paulownia species. The scorching treatment changes the surface characteristics as well as the color of the wood. This study focused on the effects of functional features such as water resistance, anti-mold, anti-termite, and sound improvement because this treatment is usually used on paulownia wood-bodied musical instruments surface. It took 28'57" for Nakdong-iron treated surface to absorb a droplet of water. The absorbance time of iron treated surface was longer than that of torch treated one. There was no noticeable effect on the anti-mold test. On the anti-termite test, there was nearly 3% more mean mass loss on the torch samples than controlled and iron treated ones. In examining the sound radiation coefficient before and after Nakdong treatment, the Nakdong-iron treated surface showed an increase in the average value of 1.2 m4/kg s, which means that it has sound quality improvement. Through this research, the Nakdong technique results are expected to be used as basic-data for further research and give a practical idea for using the traditional treatment method on the wood surface.

• Journal of Korean Biological Nursing Science
• /
• v.24 no.4
• /
• pp.227-234
• /
• 2022

Purpose: Smoking is a way of coping with anxiety and stress. This study aimed to identify the effects of forest-thermal combined therapy on anxiety and depression in smokers who desire to quit smoking. Methods: Thirty participants were included in the study, 15 in the experimental group and 15 in the control group. Those in the experimental group participated in a three-day forest-thermal combined therapy program. The program includes forest walks, meditation and thermal therapy in the charcoal kiln. Results: Before and after the program, physiological indicators such as cortisol, heart rate variability, and serotonin anxiety level using the state-trait anxiety inventory (STAI), and stress level using the psychosocial well-being index (PWI) were measured in both groups. The differences in STAI (p=.012) and PWI (p=.006) scores between the experimental and control groups were statistically significant. However, cortisol, heart rate variability, and serotonin were not significantly different between the two groups after the program. Conclusion: These results show that forest-thermal combination therapy effectively reduces anxiety and stress in smokers. It suggests that forest-thermal therapy can potentially increase smoking cessation rates.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.5-7
• /
• 1974

1. This study indicates that above the fiber saturation point the drying rate can be increased with increasing the velocity of the air circutation, i.e., the drying rate of sample boards is proportional to the air velocity, but below the fiber saturation point, the effect of the velocity of air circulation is very low as shown in Figs. 1 and 2. 2. Under the controlled temperature and humidity in the kiln, the more the sample boards have moisture, the higher drying rate of it can be obtained. In other words, this means that even though in the case of drying various moisture content of wood, at the final drying stage, approximately the same percentage of moisture content of wood can be secured by employing the higher velocity of air circulation. 3. This study shows that the rate of drying in kiln changes distinctly at the fiber saturation point, i, e., above the fiber saturation point, the drying curve shows concave aginst the X axsis, but below the fiber saturation point, in the range from 30 percent of moisture content to 20 percent of moisture content, the curve shows convex as shown in Fig. 3. As the drying progresses, however, the drying curve shows concave again below 20 percent of moisture content. This means that inflection point of drying curve may be located clearly at the fiber saturation point, i.e., 30 percent of moisture content. As mentioned above, the 30 percent of moisture content of wood at which the inflectional point appears can be recognized as a critical point, i. e., the fiber saturation point at which all free water was removed from wood. The existence of inflectional point indicates that the evaporation of hygroscopic water in a cell wall is more difficult than the evaporation of free water in a cell cavity and the minor space of cell wall. The convex curve in the range of moisture content from 30 percent to 20 percent means that the evaporation of capillary condensed water has a tendency of the same rates of drying approximately, but as approaching to the 20 percent of moisture, the transfusion of moisture from wood becomes difficult because of having less moisture in cell wall. Below 20 percent of moisture content, the drying curve shows concave again, which means that it is difficult to remove the moisture located nearer to the surface of cellulose molecules and the surface bound water. These relations were revealed in Fig. 4. In comparison AC curve which does not have the two inflection points with BD curve which has two inflection points, i.e., Band D, they are mentioned already, by existence of the inflection points, the curve BD shows that the change of drying rate in the interval from 20 percent of moisture content to 30 percent of moisture content is not greater than in the case of the curve AC in the same interval. At the inflection point of 30 percent of moisture content, it can be noticed that the changing of the drying rate is very conspicuous. This phenomenon also can be recognized, as it is noticed by the Fig. 3, the drying rate from green to 30 percent of moisture content is very great. But the inclination of the curve is very slow from 30 percent of moisture content to 20 percent of moisture content, i.e., the inclination of the curve becomes almost horizontal lines. Acknowledgments Gratitude is expressed to Fred E. Dickinson, Professor of 'Wood Technology, School of Natural Resources, University of Michigan, USA for his suggestion to carry out this study.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.2
• /
• pp.1-7
• /
• 2014

Causticizing calcium carbonate (CCC) is produced as a by-product in the causticization step of the kraft pulping process. It is often calcined in a rotary lime kiln after being dewatered and reused in the causticizing process. But for the China mill, the conventional recycled way is difficult because the CCC is mainly obtained from non-wood pulping materials, which higher silicon content led to serious silicon obstacle. So it is often discarded as solid waste or used in landfill after dewatering and secondary pollution is brought. In order to prevent its secondary pollution, recent years, the CCC is used as a filler in China papermaking industry. In mill trials, the CCC can be used to replace an amount of precipitated calcium carbonate (PCC). Unfortunately, the application scope and dosage of CCC have been limited due to its lower sizing efficiency than PCC. In this study, the reason for the lower sizing efficiency of alkyl ketene dimer (AKD) when CCC was used as a filler was investigated. The results showed that the materials in green liquid, such as insoluble matter in green liquid, silicon and metal ions, were a little influence on the sizing efficiency of AKD. The higher BET and BJH pore volume of the CCC were the main reason for lower sizing efficiency of AKD when it was used as filler.

• Journal of Korea Foresty Energy
• /
• v.20 no.1
• /
• pp.28-34
• /
• 2001

To analyze chemical compositions of softwood vinegar prepared with continuous carbonized kiln, the chemical compositions were analyzed by GC-MS spectrometry. The results were summarized as follow : 1. The amounts of methylalcohol and acetic acid and of vinegar were 0.12% and 0.8% respectively, and acidity was 0.85 2. Perfume components of vinegar were frufual, 5-meayl-2-furancarboxyaldehyde, 2,3-pentanedione, 2-butanol, 2,3-dihydrofuran, 1-(2-furanyl)-etanone, benzaldehyde, 2-furan carboxyaldehyde and acetic acid. 3 Vinegar prepared from softwood, so that murk amount of guaiacyl compound and phenol derivetives are produced from lignin and extractives was analγzed. 4 The yield of 4-methyl-di-tert-butylphenol was the highest in the nutural and carbonyl and acetic acid in the acid fractions, 3-ethylpentane in the basic fraction, and guaiacol in the phenolic fraction.

• Journal of Fashion Business
• /
• v.7 no.2
• /
• pp.55-68
• /
• 2003

The purpose of this research is to expand the realm of a button for a decorative purpose through embossing the effect and gravity of a button in fashion by designing the new ceramic buttons which are mainly used for decorative function in costume. In order to acquire a motif for the design, I analyzed several works of Gustav Klimt. As the result, those feature can be classified into the use of decorative lines, mosaic forms, and harmony of golden yellow and black, and it can be applied to buttons and clothes design. The sort of clay used in manufacturing the ceramic buttons was white clay to have high density and to diffuse light well, and press shaping techniques using plaster mold were employed. The baking was performed in an electronic kiln at $800^{\circ}C$ for the first time and at $1250^{\circ}C$ for the second time. Based on wearable designs in 2002/2003 F/W Trend of Interfashion Planning, I made three pieces of dress which could express the button's capability of decoration with effect. This is expressing a simplified form which shows up in details of and yellow and red pink were used to harmonize with golden yellow clothes. As an application of shapes of foliage in I transformed its size and form to be consistent with a jacket and a tube top. To accord with golden beige costume, I made a curve, showing up in Klimt's paintings, with golden color on a circle shape which was also a main motif in his paintings.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.2
• /
• pp.108-116
• /
• 2010

This paper explains the effects of wood drying on treatability (as determined by water uptake) of Japanese red pine (Pinus densiflora S. et Z.) at the sevenmoisture content (MC) levels above and below the fiber saturation point (FSP). According to the experimental results, it was found that water uptake (as the percentage of void volume filledwith distilled water, VVF%) was influenced by level of moisture content and percentage of void volume filled was improved effectively by kiln drying process. A significant relationship between moisture content and treatability was established. Permeability and liquid uptake were decreased above the FSP due to the effect of the less void space available in wood. Even though increased liquid uptake was observed at lower moisture content, no significant differences was observed moisture content below 20%. Therefore, this species need to be initially dried below FSP before treated with liquids. But drying moisture content below 10% might not be economical for the commercial purpose comparing drying the wood between 10 and 20% moisture content. The result of this study inferred that the treatability of pine wood can be improved by reducing the moisture content up to a certain level of 10~20% for allowing better performance.

• Journal of the Korea Furniture Society
• /
• v.21 no.6
• /
• pp.499-504
• /
• 2010

Korean traditional buildings, Hanok, are mostly constructed with dimension lumbers and roundwoods. They are hardly kiln-dried without severe defects, thus usually air-dried from some months to an year. Dimension lumbers and roundwoods were heat-treated above $170^{\circ}C$ and drying defects were examined. Temperature rising curves of all dimension timbers used for this study show one or two deflection points. The time when the temperature at 37.5mm depth reached at $100^{\circ}C$ for spruce dimension heat-treated at $170^{\circ}C$ was twice longer than that heat-treated at $190^{\circ}C$. There were many internal checks in roundwoods of $148mm{\Phi}$, while surface checks were apparently closed at the end of heat treatment. The drying time of $300{\times}300mm$ dimensions with 65mm hole was shorter than that without hole by half.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.3
• /
• pp.213-221
• /
• 2002

The emission characteristics of particulate matter (PMs) and heavy metals from hazardous industrial wast incinerators were investigated. The particle size distribution (PSD) of PM-10 showed different patterns for two tripes of incinerators; stoker and rotary kiln. However both types showed bimodal form at inlet of air pollution control devices (APCD) and each peak (mode) is located at smaller than 1 ${\mu}{\textrm}{m}$ and near 10 ${\mu}{\textrm}{m}$. It could explain the growth of fine PM by nucleation/coagulation/condensation of metal vapors for fine mode. The PSD of PM-10 after APCD was also influenced by APCD types that had different collection mechanism, and both electrostatic precipitator and bag filter showed less collection efficiency for particles ranged from 0.2 to 0.4 ${\mu}{\textrm}{m}$ and led to a mode in the range of 0.2 to 0.8 ${\mu}{\textrm}{m}$. However the hag filter showed two modes of PSD, while the electrostatic precipitator had one peak. The PMs and heavy metals emission factors, the representative value of emission quantity for sources, for tested facilities were developed. The emission factor of uncontrolled total PM and PM-10 were 14.7 and 7.05 kg/ton waste, respectively. The emission factors from this study were a little bit different with those from US EPA AP-42. It may thus be appropriate to use these results in the course of developing national emission factors.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.3
• /
• pp.42-50
• /
• 2003

Pyrolysis of maize is experimentally investigated in bench-scale rotary kiln in semi-continuous operation. The operational parameters varied are the temperature($450{\sim}800^{\circ}C$), the solids residence time(7~20 min). Important parameters studied include the running time, water content of sewage sludge, solids amount of sewage sludge(TS%) by the varied temperature. Also, with the increasing of temperature, how the yield of oil and char product change was observed, and the distribution of gas production components was observed. The gas of $C_1{\sim}C_3$ yield increased and oil of $C4{\sim}C6$ yield decreased along with pyrolysis temperature of $670^{\circ}C$ by the run time of 9 min. The results showed the expected strong influence of pyrolysis temperature and a noticeable influence of running time.