• 제목/요약/키워드: k-value

검색결과 47,411건 처리시간 0.067초

GFI를 활용한 건설공사 시공VE 대안평가 방법 (Alternative Evaluation Method of GFI-based Construction Value Engineering)

  • 김수용;이영록;양진국
    • 한국건설관리학회논문집
    • /
    • 제16권3호
    • /
    • pp.3-10
    • /
    • 2015
  • 건설 프로젝트의 VE는 크게 설계단계 VE와 시공단계 VE로 분류된다. 설계단계 VE는 정부의 법률에 의해 100억 원 이상의 공공 건설공사에 적용해야만 한다. 따라서 설계VE는 건설 프로젝트에 적극적으로 적용되고 있다. 이와는 대조적으로, 시공 VE는 제한된 특정 건설 프로젝트에 적용되고 있다. 그 이유는 시공 VE 프로세스가 실무적 요구 품질을 반영 할 수 없기 때문이다. 시공 VE는 시공 가능성에 대한 타당성 검증을 통해 긍정적인 효과를 구현할 수 있다. 이에 본 연구에서는 실무를 반영한 시공 VE의 방법을 제안하고자 한다. 제안 방법은 직관지수(G.F.I.)를 활용한 전문가 기반의 대안평가 방법이며, 제안 방법의 적용성을 검증하기 위해 실무사례에 적용하였다. 그 결과 제안된 대안평가 방법은 기존의 방법보다 적용 절차, 적용 방법 측면에서 효율성이 높은 것으로 나타났다.

An Efficiency Assessment for Reflectance Normalization of RapidEye Employing BRD Components of Wide-Swath satellite

  • Kim, Sang-Il;Han, Kyung-Soo;Yeom, Jong-Min
    • 대한원격탐사학회지
    • /
    • 제27권3호
    • /
    • pp.303-314
    • /
    • 2011
  • Surface albedo is an important parameter of the surface energy budget, and its accurate quantification is of major interest to the global climate modeling community. Therefore, in this paper, we consider the direct solution of kernel based bidirectional reflectance distribution function (BRDF) models for retrieval of normalized reflectance of high resolution satellite. The BRD effects can be seen in satellite data having a wide swath such as SPOT/VGT (VEGETATION) have sufficient angular sampling, but high resolution satellites are impossible to obtain sufficient angular sampling over a pixel during short period because of their narrow swath scanning when applying semi-empirical model. This gives a difficulty to run BRDF model inferring the reflectance normalization of high resolution satellites. The principal purpose of the study is to estimate normalized reflectance of high resolution satellite (RapidEye) through BRDF components from SPOT/VGT. We use semi-empirical BRDF model to estimated BRDF components from SPOT/VGT and reflectance normalization of RapidEye. This study used SPOT/VGT satellite data acquired in the S1 (daily) data, and within this study is the multispectral sensor RapidEye. Isotropic value such as the normalized reflectance was closely related to the BRDF parameters and the kernels. Also, we show scatter plot of the SPOT/VGT and RapidEye isotropic value relationship. The linear relationship between the two linear regression analysis is performed by using the parameters of SPOTNGT like as isotropic value, geometric value and volumetric scattering value, and the kernel values of RapidEye like as geometric and volumetric scattering kernel Because BRDF parameters are difficult to directly calculate from high resolution satellites, we use to BRDF parameter of SPOT/VGT. Also, we make a decision of weighting for geometric value, volumetric scattering value and error through regression models. As a result, the weighting through linear regression analysis produced good agreement. For all sites, the SPOT/VGT isotropic and RapidEye isotropic values had the high correlation (RMSE, bias), and generally are very consistent.

X-선 프랙토그라피에 의한 가스배관재의 피로파면해석 (Analysis on the Fatigue Fracture Surface of Gas Piping Material using the X-Ray Fractography)

  • 임만배
    • 한국안전학회지
    • /
    • 제17권1호
    • /
    • pp.18-24
    • /
    • 2002
  • This study verified the relationship between fracture mechanics parameters(${\Delta}K,\;K_{max}$) and X-ray parameters ($(\sigma}_r,;B$) for G365 steel at elevated temperature up to $300{\circ}C$. The fatigue crack propagation test were carried out and X-ray diffraction technique according to crack length direction was applied to fatigue fractured surface. The residual stress on the fracture surface was found to increase in low ${\Delta}K$ region, reach to a maximum value at a certain value of $K_{max}$ or ${\Delta}K$ and then decrease. Residual stress was independent on stress ratio by arrangement of ${\Delta}K$ and half value breadth was independent by the arrangement of $K_{max}$. The equation of ${\sigma}_r-{\Delta}K$ was established by the experimental data. Therefore, fracture mechanics parameters could be estimated by the measurement of X-ray parameters.

FPGA based Dynamic Thresholding Circuit

  • Cho, J.U.;Lee, S.H.;Jeon, J.W.;Kim, J.T.;Cho, J.D.;Lee, K.M.;Lee, J.H.;Byun, J.E.;Choi, J.C.
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.1235-1238
    • /
    • 2004
  • Thresholding has been used to reduce the number of gray values in images. Typically, a single threshold value has been used, resulting in two gray level images. Image reduction of one single threshold value, however, may lose too much of the high-frequency edge information. Thus, dynamic thresholding that uses a different threshold for each pixel is preferred instead of using a single threshold value. Dynamic thresholding can preserve high frequency details as well as reduce the size of images. Since it takes long time to perform existing software dynamic thresholding in an embedded system, this paper proposes and implements a circuit by using a FPGA in order to perform a real-time dynamic thresholding,. The proposed circuit consists of two counters, and threshold look-up table, and control unit. The values of two counters determine each pixel position, the threshold look-up table converts each pixel value into other value, and the control unit generates necessary control signals. On arriving from a camera to the proposed circuit, each pixel is compared with its threshold value and is converted into other gray value. An image processing system by using the proposed circuit will be implemented and some experiments will be performed.

  • PDF

Nonestimability of missing values for $2^K$ and $3^K$Factoroial Designs

  • Jung W. Sim;Park, Sung H.
    • Journal of the Korean Statistical Society
    • /
    • 제13권1호
    • /
    • pp.57-68
    • /
    • 1984
  • A method of missing value estimation for a general design is descrived. In particular, the cases of missing value estimation for $2^k$ and $3^k$ design are explored and discussed. Some examples are illustrated to show the missing value estimation and the nonestimatimable cases.

  • PDF

Influence of Polarizer with Different Haze Value on the Optical Properties of TFT-LCD

  • Lei, Shing;Chuang, Chia-Ling
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.687-690
    • /
    • 2006
  • Influence of polarizer with different haze value on the optical properties of TFT-LCD TV has been investigated. According to the results, a optimum optical performance can be achieved by using the polarizer with proper haze value.

  • PDF

MULTIPLE SOLUTIONS OF IMPULSIVE BOUNDARY VALUE PROBLEMS ON THE HALF-LINE

  • Liu, Xiyu;Yan, Baoqiang
    • Journal of applied mathematics & informatics
    • /
    • 제5권1호
    • /
    • pp.111-124
    • /
    • 1998
  • Existence results of multiple solutions are obtained un-der suitable conditions for impulsive integrodifferential boundary value problems on the half-line which may be singular at the boundary.

A Note on Convergence of Expected Value of Fuzzy Variables

  • Hwang, Chang-Ha;Hong, Dug-Hun
    • Journal of the Korean Data and Information Science Society
    • /
    • 제15권2호
    • /
    • pp.495-498
    • /
    • 2004
  • In this note, we consider several types of convergence theorems for the expected value of fuzzy variables defined by Liu and Liu [IEEE Trans. Fuzzy Systems, 10(2002), 445-450].

  • PDF